A Post-processing Algorithm of 5-axis CNC Machine and Optimal Design for Ball-end Milling Tool's Grinding Path
-
摘要: 提出了五轴数控机床后置处理算法的通用公式,并以正交AC型双转台机床为例进行了具体分析。以球头铣刀后刀面的刃磨为具体加工实例,在验证后置处理算法的同时,提出了"假想砂轮"的处理方法,在机床具体运动结构的限制下初步优化了加工路径。针对AC型双转台机床的C轴在奇异区域内存在转角步距较大从而形成过大的非线性误差并因此造成工件过切和机床震颤等的情况,提出在奇异区域内对加工路径进行三次B样条拟合后再插补的平滑处理方法,进一步优化了加工路径。仿真结果和实际加工效果都验证了此方法的可行性。Abstract: A universal post-processing algorithm for 5-axis CNC machine was proposed and applied to an orthogonal AC-type double turret machine. In this paper, experiments on the flank face grinding of a ball-end milling tool was conducted in the AC-type double turret machine. After verifying the post-processing algorithm, a "virtual grinding wheel" method was put forward to optimize the machining path roughly under the machine's moving structural constraints. Considering the fact that the steps of C-axis rotate and cause big non-linear errors and overcut of the workpiece in the singularity region, which is normal in machine tools with a C-axis, the machining path in this region was optimized further with the cubic B-spline curve fitting method. The simulation and eventual grinding results verify the feasibility of this method.
-
Key words:
- 5-axis CNC machine /
- AC-type double turret machine /
- post-processing /
- singularity region /
- B-spline
-
[1] 周济,周艳红.数控加工技术[M].北京:国防工业出版社,2002 Zhou J, Zhou Y H. Technology of NC machining[M]. Beijing:National Defense Industry Press, 2002(in Chinese) [2] 郑飂默,林浒,盖荣丽.基于通用运动模型的五轴机床后置处理[J].计算机集成制造系统,2010,16(5):1006-1011 Zheng L M, Lin H, Gai R L. Postprocessor based on generalized kinematics model of five-axis machine tools[J]. Computer Integrated Manufacturing Systems, 2010,16(5):1006-1011(in Chinese). [3] Sørby K. Inverse kinematics of five-axis machines near singular configurations[J]. International Journal of Machine Tools and Manufacture, 2007,47(2):299-306 [4] Affouard A, Duc E, Lartigue C, et al. Avoiding 5-axis singularities using tool path deformation[J]. International Journal of Machine Tools and Manufacture, 2004,44(4):415-425 [5] 王峰,林浒,郑飂默,等.五轴加工奇异区域的检测和处理[J].计算机集成制造系统,2011,17(7):1435-1440 Wang F, Lin H, Zheng L M, et al. Detection and treatment of singular area in five-axis machining[J]. Computer Integrated Manufacturing System, 2011,17(7):1435-1440(in Chinese) [6] 郑飂默,林浒,盖荣丽,等.五轴数控系统旋转轴快速平滑插补控制策略[J].机械工程学报,2011,47(9):105-111 Zheng L M, Lin H, Gai R L, et al. Fast Smooth interpolation control strategy of rotary axes for five-axis CNC systems[J]. Journal of Mechanical Engineering, 2011,47(9):105-111(in Chinese) [7] 林志伟.五轴数控加工无干涉无奇异高效轨迹生成与优化研究[D].杭州:浙江大学,2014 Lin Z W. Research on non-interference non-singular efficient tool path planning and optimization for five-axis machining[D]. Hangzhou:Zhejiang University, 2014(in Chinese) [8] 周志雄,周秦源,任莹晖.复杂曲面加工技术的研究现状与发展趋势[J]]机械工程学报,2010,46(17):105-113 Zhou Z X, Zhou Q Y, Ren Y H. Current research and development trends of complex surface machining technology[J]. Journal of Mechanical Engineering, 2010,46(17):105-113(in Chinese) [9] 赵薇.多过程数控系统解释器及RTCP功能的设计与实现[D].沈阳:中国科学院研究生院,2008 Zhao W. Design and implementation of the interpreter in multi-process CNC and the RTCP Funcation of 5-linkage CNC system[D]. Shenyang:Graduate University of Chinese Academy of Sciences, 2008(in Chinese) [10] 吕颖,姚斌,陈站,等."S"形刃球头立铣刀的磨削成形刀位轨迹研究[J].工具技术,2015,49(10):24-27 Lv Y, Yao B, Chen Z, et al. Research on grinding forming cutter location of ball-nose end mill with ″S″ shape major cutting edges[J]. Tool Engineering, 2015,49(10):24-27(in Chinese) [11] 陈逢军.基于五轴数控磨床加工的球头立铣刀数学模型及仿真研究[D].长沙:湖南大学,2006 Chen F J. The research on simulation and mathematical model of ball-end cutters based on five-axis numerial control grinder[D]. Changsha:Hunan University, 2006(in Chinese) [12] 余丹,闫光荣,范庆香,等.五轴后置处理转角选解优化及奇异区域处理方法的研究[J].图学学报,2016,37(5):614-619 Yu D, Yan G R, Fan Q X, et al. Research on optimization of rotation angle and singular area handling in five-axis post-processing[J]. Journal of Graphics, 2016,37(5):614-619(in Chinese) [13] 蔡安江,赵丹,叶向东,等.五轴加工奇异问题机理分析及其避免策略[J].机械科学与技术,2017,36(8):1237-1243 Cai A J, Zhao D, Ye X D, et al. Mechanism analysis and avoiding strategy of singular problem in five-axis machining[J]. Mechanical Science and Technology for Aerospace Engineering, 2017,36(8):1237-1243(in Chinese) [14] Piegl L,Tiller W.非均匀有理B样条[M].赵罡,穆国旺,王拉柱,译.北京:清华大学出版社,2010 Piegl L, Tiller W. The nurbs book nurbs book[M].Zhao G, Mu G W, Wang L Z, trans. Beijing:Tsinghua University Press, 2010(in Chinese) [15] 孙玉文,徐金亭,任斐,等.复杂曲面高性能多轴精密加工技术与方法[M].北京:科学出版社出,2014 Sun Y W, Xu J T, Ren F, et al. High performance multi axis precision machining technology and method of complex curved surface[M]. Beijing:Science Press, 2014(in Chinese)
点击查看大图
计量
- 文章访问数: 323
- HTML全文浏览量: 32
- PDF下载量: 123
- 被引次数: 0