Research on Hand Operation for Cockpit Layout Optimization
-
摘要: 以优化飞机驾驶舱布局设计为目的,对人体的手部操作进行了研究。首先,对驾驶舱显控装置的关联性进行分析;其次,以减小人体的手部操作路线总长为目的,对驾驶舱人机界面进行了布局优化分析;接着,以人手部几何模型和人手部Kane动力学模型为依据,建立了基于人手部操作舒适性的驾驶舱布局优化模型;最后,通过实际案例对人机界面上的操作路线进行了仿真分析;利用CATIA仿真人在驾驶舱中的手部操作姿态,计算出人手的操作舒适性,并通过舒适性评价模块进行了结果验证。理论分析和仿真结果表明,在飞机驾驶舱中相对重要的设备应布置在手部操作舒适性较高的区域,并且在布局设计过程要尽量缩短人体手部操作设备的路线,该模型提高了驾驶人员的操作效率,可作为驾驶舱布局优化设计的参考依据。Abstract: To optimize the layout design of aircraft cockpit, research on operating of hand was conducted. Firstly, correlation between display device and control device in the cockpit was analyzed. Secondly, for the purpose of reducing length of hand operating route, layout optimization of cockpit man-machine interface was analyzed. Then, the mode of layout optimization based on hand operating comfort was established on the basis of geometry model of human hand and hand Kane dynamic model. Finally, simulation of hand operating route on man-machine interface was analyzed through practical case. Human hand operating gesture in the cockpit was simulated in the CATIA and joint angle data was obtained; Result was validated through CATIA module of comfort evaluation. The theoretical analysis and simulation results show that relatively important equipment should be arranged at the area that hand operation comfort is high, and length of hand operating route should be shorten as far as possible in the process of layout design. The model can improve the operating efficiency of driver and provide reference of cockpit layout design.
-
Key words:
- hand operating comfort /
- operating routes /
- joint torque /
- cockpit /
- CATIA /
- layout optimization
-
[1] 左兴权,王春露,赵新超.一种结合多目标免疫算法和线性规划的双行设备布局方法[J].自动化学报,2015,41(3):528-540 Zuo X Q, Wang C L, Zhao X C. Combining multi-objective immune algorithm and linear programming for double row layout problem[J]. Acta Automatica Sinica, 2015,41(3):528-540(in Chinese) [2] Abril F C, Alvarez C M. Scheduling resource-constrained projects using branch and bound and parallel computing techniques[J]. International Journal of Operational Research, 2005,1(1-2):172-187 [3] 秦国华,赵旭亮,吴竹溪.基于神经网络与遗传算法的薄壁件多重装夹布局优化[J].机械工程学报,2015,51(1):203-212 Qin G H, Zhao X L, Wu Z X. Optimization of multi-fixturing layout for thin-walled workpiece based on neural network and genetic algorithm[J]. Journal of Mechanical Engineering, 2015,51(1):203-212(in Chinese) [4] Balamurugan K, Selladurai V, Ilamathi B. Manufacturing facilities layout design using genetic algorithm[J]. International Journal of Manufacturing Technology and Management, 2008,14(3-4):461-474 [5] 徐义春,肖人彬.用蚁群算法求解带平衡约束的圆形布局问题[J].控制与决策,2008,23(1):25-29 Xu Y C, Xiao R B. Ant colony algorithm for layout optimization with equilibrium constraints[J]. Control and Decision, 2008,23(1):25-29(in Chinese) [6] Lan S, Zhao J. Facilities layout optimization method combining human factors and SLP[C]//Proceedings of 2010 International Conference on Information Management, Innovation Management and Industrial Engineering. Kunming:IEEE, 2010:608-611 [7] Valenti R, Gevers T. Accurate eye center location through invariant isocentric patterns[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 2012,34(9):1785-1798 [8] 郭琛.眼动和脑电同步采集和分析的研究与应用[D].北京:清华大学,2012 Guo C. Methods towards synchronous recording and analysis of eye movements and electroencephalograph[D]. Beijing:Tsinghua University, 2012(in Chinese) [9] 郭永丛,司玉娟.基于心电信号提取呼吸信号的算法[J].吉林大学学报(信息科学版),2016,34(3):327-333 Guo Y C, Si Y J. Respiratory signal extraction algorithm based on ECG[J]. Journal of Jilin University (Information Science Edition), 2016,34(3):327-333(in Chinese) [10] 中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.GB/T 17245-2004成年人人体惯性参数[S].北京:中国标准出版社,2004 General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. GB/T 17245-2004 Inertial parameters of adult human boday[S]. Beijing:Standards Press of China, 2004(in Chinese) [11] 蔡自兴.机器人学[M].北京:清华大学出版社,2000 Cai Z X. Robotics[M]. Beijing:Tsinghua University Press, 2000(in Chinese) [12] 毕红哲,庄达民.航空人机工程计算机仿真[M].北京:电子工业出版社,2010 Bi H Z, Zhuang D M. Computer simulation for aviation man-machine engineering[M]. Beijing:Publishing House of Electronics Industry, 2010(in Chinese) [13] Liu Y H, Ji X W, Ryouhei H, et al. Function of shoulder muscles of driver in vehicle steering maneuver[J]. Science China Technological Sciences, 2012,55(12):3445-3454 [14] 丁玉兰.人机工程学[M].北京:北京理工大学出版社,2002 Ding Y L. Ergonomics[M]. Beijing:Beijing Institute of Technology Press, 2002(in Chinese) [15] Hayashi T, Kawamoto H, Sankai Y. Control method of robot suit HAL working as operator's muscle using biological and dynamical information[C]//Proceedings of 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems. Edmonton, Alta., Canada:IEEE, 2005:3063-3068
点击查看大图
计量
- 文章访问数: 140
- HTML全文浏览量: 22
- PDF下载量: 7
- 被引次数: 0