等前角剐齿刀设计计算方法

李佳; 杨唐军; 王鹏; 郑淑贤

doi:10.13433/j.cnki.1003-8728.2017.1213

等前角剐齿刀设计计算方法

doi: 10.13433/j.cnki.1003-8728.2017.1213

1.
天津大学机构理论与装备设计教育部重点实验室, 天津 300072

基金项目:

天津市科技支撑计划重点项目（16YFZCGX00130）资助

详细信息

作者简介:
李佳(1955-),教授,博士生导师,研究方向为数控装备、数字临床技术,jli@tju.edu.cn

计量
- 文章访问数: 182
- HTML全文浏览量: 27
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2016-09-24
- 刊出日期: 2017-12-15

Design and Computation Method of Slicing Cutter with Equal Rake Angle

1.
Key Laboratory of Mechanism and Equipment Design of Ministry of Education, Tianjin University, Tianjin 300072, China

摘要

摘要: 针对目前剐齿加工生产中加工工件表面质量差，左右齿面加工精度不一致的问题，提出了一种等前角剐齿刀的设计计算方法。根据待加工工件齿面的几何特征和剐齿加工的运动关系，基于曲面共轭原理，求取工件齿面共轭面；选择球面作为初始前刀面，以无理论刃形误差为目标，采用齿面共轭面与初始前刀面的交线作为切削刃；根据切削前角一致性原则对初始前刀面进行再设计，沿切削刃构造前刀面；通过模拟刃磨，求取一系列无理论刃形误差的切削刃，依次构造后刀面，最终获得完整的具有相等切削前角的剐齿刀具；通过计算实例验证该设计计算方法的可行性和有效性。
- 齿轮刀具 /
- 剐齿刀设计 /
- 等前角 /
- 无理论刃形误差
Abstract: In the view of the problems, the poor quality of machined surface and inconsistent machining precision of left and right tooth surfaces, the design and computation method of slicing cutter with equal rake angle is proposed. On beginning, the conjugate surface of gear surface is obtained based on the principle of conjugate surface according to the geometric feature of machining gear tooth surface and the motion relationship in slicing. Meanwhile, the sphere surface is chosen as the original rake face. To achieve the requirement of theoretical error-free edge profile, the intersecting curve of conjugate surface and original design rake face is calculated as the cutting edge. On the basis of those works, the original rake face is redesigned by constructing a new rake face along the cutting edge complying with the principle of consistent rake angle. With this method, a series of cutting edges with theoretical error-free edge profile are obtained by means of the simulative cutter sharpening, which are used for constructing the flank face. As a result, the complete slicing cutter with equal rake angle is obtained. The calculation case is performed to verify the feasibility and effectiveness of the above developed method. At last, the conclusion and discussion are provided.
- gear cutter /
- slicing cutter design /
- equal rake angle /
- theoretical error-free edge profile

HTML全文

参考文献(15)

[1]	李佳,陈新春,张鸿源.圆柱齿轮剐齿技术[J].机械工程学报,2011,47(19):193-198 Li J, Chen X C, Zhang H Y. Slicing technology for cylindrical gears[J]. Journal of Mechanical Engineering, 2011,47(19):193-198(in Chinese)
[2]	Stadtfeld H J. Power skiving of cylindrical gears on different machine platforms[J]. Gear Technology, 2014,31(1):52-62
[3]	Tsai C Y. Mathematical model for design and analysis of power skiving tool for involute gear cutting[J]. Mechanism and Machine Theory, 2016,101:195-208
[4]	陈新春,李佳,贺友平.直齿剐齿刀结构设计与计算[J].天津大学学报,2012,45(5):411-416 Chen X C, Li J, He Y P. Structure design and calculation of spur slice cutter[J]. Journal of Tianjin University, 2012,45(5):411-416(in Chinese)
[5]	Chen X C, Li J, Lou B C. A study on the design of error-free spur slice cutter[J]. The International Journal of Advanced Manufacturing Technology, 2013,68(1-4):727-738
[6]	李佳,娄本超,陈新春.基于自由曲面的剐齿刀结构设计[J].机械工程学报,2014,50(17):157-164 Li J, Lou B C, Chen X C. Structural design of slice cutter based on free-form surface[J]. Journal of Mechanical Engineering, 2014,50(17):157-164(in Chinese)
[7]	Guo E K, Hong R J, Huang X D, et al. Research on the design of skiving tool for machining involute gears[J]. Journal of Mechanical Science and Technology, 2014,28(12):5107-5115
[8]	Guo Z, Mao S M, Li X E, et al. Research on the theoretical tooth profile errors of gears machined by skiving[J]. Mechanism and Machine Theory, 2016,97:1-11
[9]	Guo E K, Hong R J, Huang X D, et al. A novel power skiving method using the common shaper cutter[J]. The International Journal of Advanced Manufacturing Technology, 2016,83(1-4):157-165
[10]	Monden T, Kikuchi T, Chihara Y, et al. MHI super-skiving system for longer tool life and enhanced efficiency in internal gear cutting[J]. Mitsubishi Heavy Industries Technical Review, 2015,52(1):101-105
[11]	Radzevich S P. Gear cutting tools[M]. Boca Raton:CRC Press, 2010
[12]	肖来元,廖道训,易传云.共轭曲面求解理论与方法研究[J].机械科学与技术,2002,21(3):345-347 Xiao L Y, Liao D X, Yi C Y. An overview of the theory and method on the conjugate surface design[J]. Mechanical Science and Technology, 2002,21(3):345-347(in Chinese)
[13]	施法中.计算机辅助几何设计与非均匀有理B样条[M].北京:高等教育出版社,2001 Shi F Z. CAGD & NURBS[M]. Beijing:Higher Education Press, 2001(in Chinese)
[14]	谭建荣,卓守鹏.自由曲面与函数曲面求交的数值解法[J].浙江大学学报(自然科学版),1991,25(3):325-334 Tan J R, Zhuo S P. Numerical solution of finding the intersection between a free-form surface and a function surface[J]. Journal of Zhejiang University (Natural Science),1991,25(3):325-334(in Chinese)
[15]	吴序堂.齿轮啮合原理[M].2版.西安:西安交通大学出版社,2009 Wu X T. Principle of gearing[M].2nd ed. Xi'an:Xi'an Jiaotong University Press,2009(in Chinese)