圆锥滚子定姿态贯穿式超精研油石磨刃分析

薛进学; 杨柏松; 贾松阳

doi:10.13433/j.cnki.1003-8728.2017.0816

圆锥滚子定姿态贯穿式超精研油石磨刃分析

doi: 10.13433/j.cnki.1003-8728.2017.0816

1.
河南科技大学机电工程学院, 河南洛阳 471003

基金项目:

国家自然科学基金项目（51475145）、河南省教育厅科技攻关项目（13A460268）及河南科技大学研究生教学改革研究基金重点项目（2013YJG-001）资助

详细信息

作者简介:
薛进学(1965-),副教授,博士,研究方向为硬脆材料精密加工与检测,超声振动加工,xjx19652000@163.com

计量
- 文章访问数: 243
- HTML全文浏览量: 41
- PDF下载量: 9
- 被引次数: 0
出版历程
- 收稿日期: 2016-04-07
- 刊出日期: 2017-08-05

Analysing Cutting Edge of Taper Roller and Oilstone in Fixed Posture Through-feed Superfinishing

1.
College of Mechanical and Electrical Engineering, Henan University of Science and Technology, Henan Luoyang 471003, China

摘要

摘要: 基于超精研过程中圆锥滚子与油石接触的几何特点及磨削原理，建立数学模型包括单位面积动态有效磨刃数模型和整体动态有效磨刃数模型，估计参数取值并用MATLAB运行模型，分析关键因素对磨刃分布的影响。超精研区不断变化的滚子半径是引起磨刃数动态变化的主要因素；受到滚子与油石径向接触弧长的影响，单位面积动态有效磨刃分布与整体动态有效磨刃分布完全不同；油石振荡频率对整体磨刃分布的影响最明显。若考虑磨削深度随滚子与油石接触面积的变化而变化，可以得到理想的"对号"形磨刃分布。
- 圆锥滚子 /
- 油石 /
- 定姿态贯穿式超精研 /
- 动态有效磨刃数 /
- 磨削深度
Abstract: Based on the contact geometry characteristics of taper roller and oilstone in the superfinishing process and the grinding principle, the mathematical models including the model of number of dynamically effective cutting edges per unit area and the model of number of dynamically effective integral cutting edges are established. The models and their parameter estimation are simulated with MATLAB. The influence of key elements on dynamically effective cutting edge distribution is analysed. The changing radius of the tape roller in the superfinishing region is the principal factor that causes the dynamical variation of number of cutting edges. Because of the influence of the radial contact arc length between tape roller and oilstone, the dynamically effective cutting edge distribution per unit area and the dynamically effective integral cutting edge distribution are different. The oilstone oscillation frequency obviously influences the integral cutting edge. With the fact that the contact area between tape roller and oilstone changes with the grinding depth considered, an ideal cutting edge distribution can be obtained.
- taper roller /
- oilstone /
- fixed posture through-feed superfinishing /
- dynamically effective cutting edge number /
- grinding depth

HTML全文

参考文献(15)

[1]	郑红威,贺红霞,何萌,等.D42218N3W圆柱滚子超精加工工艺参数的确定[J].轴承,2014,(10):16-18 Zheng H W, He H X, He M, et al. Determination of superfinishing process parameters for cylindrical rollers D42218N3W[J]. Bearing, 2014,(10):16-18(in Chinese)
[2]	陈家庆,张沛,徐林林.滚动轴承滚子凸度设计的理论研究进展[J].北京石油化工学院学报,2001,9(1):32-38 Chen J Q, Zhang P, Xu L L. Theoretical research on crowned design of roller bearing[J]. Journal of Beijing Institute of Petro-Chemical Technology, 2001,9(1):32-38(in Chinese)
[3]	中国机械工程学会.中国机械工程技术路线图[M].北京:中国科学技术出版社,2011 China Mechanical Engineering Society. Technology roadmaps of Chinese mechanical engineering[M]. Beijing:Science and Technology of China Press, 2011(in Chinese)
[4]	陈芳华,汪久根,张根源.对数修形圆锥滚子的弹流润滑分析[J].机械工程学报,2011,47(19):143-148 Chen F H, Wang J G, Zhang G Y. Elastohydrodynamic lubrication of tapered roller with logarithmic profile[J]. Journal of Mechanical Engineering, 2011,47(19):143-148(in Chinese)
[5]	马家驹,徐文,陈晓阳.滚子摩擦副弹流润滑特性及其应用:Ⅱ.工程对数滚子的弹流数值解[J].摩擦学学报,2000,20(1):63-66 Ma J J, Xu W, Chen X Y. EHL properties of roller contacts and its application:Part Ⅱ:a numerical analysis of EHL for engineering logarithmic roller[J]. Tribology, 2000,20(1):63-66(in Chinese)
[6]	Heydari M, Gohar R. The influence of axial profile on pressure distribution in radially loaded rollers[J]. Journal of Mechanical Engineering Science, 1979,21(6):381-388
[7]	魏敏.圆柱滚子工作表面廓型对其接触疲劳寿命的影响[J].轴承,1996,(5):35-38 Wei M. The influence of the geometrical form of roller working surface to its contact fatigue life[J]. Bearing, 1996,(5):35-38(in Chinese)
[8]	夏新涛,马伟,颉谭成,等.滚动轴承制造工艺学[M].北京:机械工业出版社,2007 Xia X T, Ma W, Xie T C, et al. Manufacturing technology of rolling bearing[M]. Beijing:China Machine Press, 2007(in Chinese)
[9]	Neagu-Ventzel S, Cioc S, Marinescu I. A wear model and simulation of superfinishing process:Analysis for the superfinishing of bearing rings[J]. Wear, 2006,260(9-10):1061-1069
[10]	高作斌,马伟,邓效忠.滚子轴承凸度加工技术的研究进展[J].轴承,2011,(10):61-63 Gao Z B, Ma W, Deng X Z. Research progress on convexity machining technology for roller bearings[J]. Bearing, 2011,(10):61-63(in Chinese)
[11]	高作斌,马伟,邓效忠,等.圆锥滚子定姿态贯穿式超精研凸度形成机理分析[J].机械工程学报,2013,49(23):96-104 Gao Z B, Ma W, Deng X Z, et al. Analysis of crown generating mechanism in fixed posture through-feed superfinishing of taper rollers[J]. Journal of Mechanical Engineering, 2013,49(23):96-104(in Chinese)
[12]	任敬心,华定安.磨削原理[M].北京:电子工业出版社,2011 Ren J X, Hua D A. Principle of grinding and cutting[M]. Beijing:Publishing House of Electronics Industry, 2011(in Chinese)
[13]	Chang S H, Farris T N, Chandrasekar S. Experimental characterization of superfinishing[J]. Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture, 2003,217(7):941-951
[14]	Chang S H, Balasubramhanya S, Chandrasekar S, et al. Forces and specific energy in superfinishing of hardened steel[J]. CIRP Annals-Manufacturing Technology, 1997,46(1):257-260
[15]	高作斌,李庆玲.滚动轴承超精研工艺的特殊性[J].轴承,2014,(8):53-58 Gao Z B, Li Q L. Particularity of superfinishing technology for rolling bearings[J]. Bearing, 2014,(8):53-58(in Chinese)