单液滴冲击多孔介质过程的数值模拟与试验

周攀; 李淑娟; 杨磊鹏

doi:10.13433/j.cnki.1003-8728.2017.0624

单液滴冲击多孔介质过程的数值模拟与试验

doi: 10.13433/j.cnki.1003-8728.2017.0624

1.
西安理工大学机械与精密仪器工程学院, 西安 710048

基金项目:

国家重点基础研究发展规划项目（2009CB724406）与陕西省重点实验室项目（13JS071）资助

详细信息

作者简介:
周攀(1990-),硕士研究生,研究方向为机械电子工程,1345526200@qq.com

通讯作者:
李淑娟(联系人),教授,博士生导师,shujuanli2009@gmail.com

计量
- 文章访问数: 161
- HTML全文浏览量: 17
- PDF下载量: 10
- 被引次数: 0
出版历程
- 收稿日期: 2015-07-03
- 刊出日期: 2017-06-05

Process Simulation and Experiments of Single Droplet Impactingon Porous Materials

1.
School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, China

摘要

摘要: 三维打印过程中，粘结剂的性能及动态行为对打印过程的质量有重要影响。本文中分析了单液滴对多孔介质的冲击、扩展、渗透动态过程，建立了液滴动态变化的数学模型。为了准确描述液滴流动的动态效果，采用VOF（Volume of fluid）模型来跟踪液滴形状，采用PISO（Pressure implicit split operator）算法计算压力速度耦合。分析了液滴特性、冲击速度和多孔介质孔隙率对液滴扩展特性的影响。试验结果表明，提出的模型可以进行良好的预测，同时发现液滴最大扩展半径随液滴初始速度的增加而增加，随粘度的增加而减小；孔隙率越小，液滴在多孔介质外部的扩展明显，扩展半径变大，渗透厚度变小。
- 液滴 /
- 多孔介质 /
- 冲击速度 /
- 孔隙率
Abstract: In three-dimensional printing process,the behavior and the properties of the droplet has an great impact on the quality of the printed parts when the binder penetrate into the materials. This paper established a numerical model to study the impact process of a single droplet on the porous media, including the expansion, penetration. In order to accurately describe the dynamic effect of the droplet flow, VOF (Volume of fluid) model is used to track the droplet shape. The PISO (Pressure implicit split operator) algorithm is selected to solve the pressure-velocity combinations. the effect of the droplet characteristics, the impact velocity of the droplet and porosity of the porous media on droplet expansion characteristics was focused. The results showed that the droplet extension radius increases with the increasing of initial droplet velocity and decrease with the increasing of viscosity; the smaller the porosity of the porous media is and the bigger the expansion radius of the droplet, the smaller the penetration thickness.
- droplet /
- porous media /
- impact velocity /
- porosity

HTML全文

参考文献(19)

[1]	Li X Y. The research and process optimization of forming mechanism 3DP technology[D]. Shanghai: Tongji University, 2006:26-27 (in Chinese)
[2]	李晓燕.3DP成形技术的机理研究及过程优化[D].上海:同济大学,2006:26-27
[3]	Werner S R L, Jones J R, Paterson A H J, et al. Droplet impact and spreading: droplet formulation effects[J]. Chemical Engineering Science, 2007,62(9):2336-2345
[4]	Sui T, Jing L, Wang J D, et al. The spreading process of droplet impacting on flat solid surface[J]. Lubrication Engineering, 2011,36(7):9-13 (in Chinese)
[5]	Marston J O, Thoroddsen S T, Ng W K, et al. Experimental study of liquid drop impact onto a powder surface[J]. Powder Technology, 2010,203(2):223-236
[6]	Liu H, Wang S C, Xie M Z, et al. Process analysis of double droplets hitting wall vertically[J]. Journal of Jiangsu University (Natural Science Edition), 2012,33(3):274-277 (in Chinese)
[7]	Nefzaoui E, Skurtys O. Impact of a liquid drop on a granular medium: inertia, viscosity and surface tension effects on the drop deformation[J]. Experimental Thermal and Fluid Science, 2012,41:43-50
[8]	Song Y C, Wang C H, Ning Z. Computation of incompressible two-phase flows by using CLSVOF method[J]. Transactions of the Chinese Society for Agricultural Machinery, 2011,42(7):26-31,60 (in Chinese)
[9]	Marston J O, Sprittles J E, Zhu Y, et al. Drop spreading and penetration into pre-wetted powders[J]. Powder Technology, 2013,239:128-136
[10]	Kim W S, Lee S Y. Behavior of a water drop impinging on heated porous surfaces[J]. Experimental Thermal and Fluid Science, 2014,55:62-70
[11]	Harlow F H, Shannon J P. The splash of a liquid drop[J]. Journal of Applied Physics, 1967,38(10):3855-3866
[12]	Tsurutani K, Yao M, Senda J, et al. Numerical analysis of the deformation process of a droplet impinging upon a wall[J]. JSME International Journal, 1990,33(3):555-561
[13]	Kim E, Baek J. Numerical study of the parameters governing the impact dynamics of yield-stress fluid droplets on a solid surface[J]. Journal of Non-Newtonian Fluid Mechanics, 2012,173-174:62-71
[14]	Hung Y L, Wang M J, Liao Y C, et al. Initial wetting velocity of droplet impact and spreading: water on glass and parafilm[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2011,384(1-3):172-179
[15]	Markicevic B, Li H, Sikorski Y, et al. Infiltration time and imprint shape of a sessile droplet imbibing porous medium[J]. Journal of Colloid and Interface Science, 2009,336(2):698-706
[16]	Jazia D B, Vonna L, Knopf S, et al. Absorption of water/ethanol microdroplets into model porous networks[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2013,436:363-370
[17]	隋涛,蒋亮,汪家道,等.液滴碰撞固体壁面的铺展特征研究[J].润滑与密封,2011,36(7):9-13
[18]	刘红,王淑春,解茂昭,等.双液滴垂直碰撞等温壁面过程分析[J].江苏大学学报(自然科学版),2012,33(3):274-277
[19]	宋云超,王春海,宁智.追踪不可压缩两相流相界面的CLSVOF方法[J].农业机械学报,2011,42(7):26-31,60