并联机构的螺旋理论坐标简化方法

周一群; 牛军川

doi:10.13433/j.cnki.1003-8728.2017.0504

并联机构的螺旋理论坐标简化方法

doi: 10.13433/j.cnki.1003-8728.2017.0504

周一群¹,
牛军川^1,2, ,

1.
山东大学机械工程学院, 济南 250061;
2.
山东大学高效洁净机械制造教育部重点实验室, 济南 250061

基金项目:

国家自然科学基金项目（51275275，51675306）、汽车仿真与控制国家重点实验室开放基金项目（20161112）及山东省优秀中青年科学家科研奖励基金项目（BS2010ZZ006）资助

详细信息

作者简介:
周一群(1992-),硕士研究生,研究方向为机构学与机器人,zhou1qun@163.com

通讯作者:
牛军川(联系人),教授,博士,niujc@sdu.edu.cn

计量
- 文章访问数: 172
- HTML全文浏览量: 14
- PDF下载量: 8
- 被引次数: 0
出版历程
- 收稿日期: 2015-11-06
- 刊出日期: 2017-05-05

Coordinates-reduction Method of Parallel Mechanism based on Screw Theory

Zhou Yiqun¹,
Niu Junchuan^{1,2
, ,}

1.
School of Mechanical Engineering, Shandong University, Jinan 250061, China;
2.
Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan 250061, China

摘要

摘要: 螺旋理论求解并联机构时，运动螺旋通常采用6个坐标表示。但是，对于某些并联机构，其所有的运动螺旋存在相同的恒为零的坐标。求解这些特殊的并联机构时，可将这些恒为零的坐标去掉，对坐标进行简化。用简化后的坐标表示运动螺旋求解并联机构，相当于对问题进行了降维处理，从而简化了求解过程。转动副的特殊轴线方向以及移动副的特殊移动方向会使得表示它们的运动螺旋中某些坐标恒为零，根据运动螺旋中恒为零的坐标数以及恒为零的坐标次序不同，对运动副进行分类。对这些运动副进行组合，构成单开链，进而综合出所有的可简化成3个坐标表示的三自由度并联机构，给出了这些机构的运动螺旋的简化坐标及反螺旋计算公式，并给出了部分机构的简图。采用简化后的坐标求解这些并联机构，可有效地简化分析过程，降低求解难度。
- 螺旋理论 /
- 并联机构 /
- 运动副 /
- 坐标简化
Abstract: When solving the parallel mechanisms based on screw theory, the kinematic screws are usually expressed with six coordinates. However, for some parallel mechanisms, all the kinematic screws have the same constant zero coordinates. When solving these special parallel mechanisms, the same constant zero coordinates can be removed to reduce the coordinates. Using the reduced coordinates expressing kinematic joints to solve the parallel mechanisms is equivalent to lowering the dimensions of the problem, thus simplifying the solving procedure. The special axis configuration of revolute joints and the special moving direction of prismatic joints can make some coordinates of the kinematic screws, which denote these kinematic joints be constant zero. The kinematic joints are categorized based on different counts and order of constant zero coordinates of the kinematic screws. Single open chains are formed by these types of kinematic joints and then all 3-DOF parallel mechanisms which can be reduced to three coordinates are synthesized. The reduced coordinates which denotes the kinematic screws of the parallel mechanisms and the formula of reciprocal screws based on the reduced coordinates are presented. Some sketches of the parallel mechanisms are also proposed. Solving these parallel mechanisms based on the reduced coordinates can efficiently simplify the analyzing procedure and decrease the difficulty of solving.
- screw theory /
- parallel mechanism /
- kinematic joints /
- coordinates reduction

HTML全文

参考文献(15)

[1]	Ye W, Fang Y F, Zhang K T, et al. A new family of reconfigurable parallel mechanisms with diamond kinematotropic chain[J]. Mechanism and Machine Theory, 2014,74:1-9
[2]	Guo S, Fang Y F, Qu H B. Type synthesis of 4-DOF nonoverconstrained parallel mechanisms based on screw theory[J]. Robotica, 2012,30(1):31-37
[3]	Zhao Y, Liu J F, Huang Z. A force analysis of a 3-RPS parallel mechanism by using screw theory[J]. Robotica, 2011,29(7):959-965
[4]	Zeng D X, Huang Z. Type synthesis of the rotational decoupled parallel mechanism based on screw theory[J]. Science China Technological Sciences, 2011,54(4):998-1004
[5]	Wang J S, Wu C, Liu X J. Performance evaluation of parallel manipulators:Motion/force transmissibility and its index[J]. Mechanism and Machine Theory, 2010,45(10):1462-1476
[6]	Glazunov V. Design of decoupled parallel manipulators by means of the theory of screws[J]. Mechanism and Machine Theory, 2010,45(2):239-250
[7]	Zhang K T, Fang Y F, Fang H R, et al. Geometry and constraint analysis of the three-spherical kinematic chain based parallel mechanism[J]. Journal of Mechanisms and Robotics, 2010,2(3)
[8]	Zhao J S, Feng Z J, Dong J X. Computation of the configuration degree of freedom of a spatial parallel mechanism by using reciprocal screw theory[J]. Mechanism and Machine Theory, 2006,41(12):1486-1504
[9]	Gallardo J, Rico J M, Frisoli A, et al. Dynamics of parallel manipulators by means of screw theory[J]. Mechanism and Machine Theory, 2003,38(11):1113-1131
[10]	刘宏伟,马质璞.3-PRS并联机构运动分析及仿真[J].机械设计与制造,2012,(1):211-213 Liu H W, Ma Z P. Kinematics analysis & simulation for 3-PRS parallel mechanism[J]. Machinery Design & Manufacture, 2012,(1):211-213(in Chinese)
[11]	张彦斌,王慧萍,吴鑫.完全各向同性3自由度平面并联机构的型综合[J].光学精密工程,2012,20(3):579-586 Zhang Y B, Wang H P, Wu X. Structure synthesis of fully-isotropic 3-DOF planar parallel manipulators[J]. Optics and Precision Engineering, 2012,20(3):579-586(in Chinese)
[12]	陈海真,邹忠月,郝秀清.一种新型三平移并联机构运动输出及工作空间分析[J].机床与液压,2010,38(5):24-26 Chen H Z, Zou Z Y, Hao X Q. Analysis on output motion and workspace of a novel type 3-rcr parallel mechanism with three translations[J]. Machine Tool & Hydraulics, 2010,38(5):24-26(in Chinese)
[13]	Bonev I A, Zlatanov D, Gosselin C M. Singularity analysis of 3-DOF planar parallel mechanisms via screw theory[J]. Journal of Mechanical Design, 2003,125(3):573-581
[14]	Kong X W, Gosselin C M. Type synthesis of parallel mechanisms[M]. Berlin Heidelberg:Springer, 2007:19-23
[15]	Kong X W, Gosselin C M. Type synthesis of 3-DOF translational parallel manipulators based on screw theory[J]. Journal of Mechanical Design, 2004,126(1):83-92