行星滚柱丝杠副承载特性研究进展

刘更; 张文杰; 马尚君; 佟瑞庭

doi:10.13433/j.cnki.1003-8728.2017.0417

行星滚柱丝杠副承载特性研究进展

doi: 10.13433/j.cnki.1003-8728.2017.0417

1.
西北工业大学陕西省机电传动与控制工程实验室, 西安 710072

基金项目:

国家自然科学基金项目（51275423，51505381）与中央高校基本科研业务费专项资金（3102015JCS05008）资助

详细信息

作者简介:
刘更(1961-),教授,博士,研究方向为机电作动系统与行星滚柱丝杠副,npuliug@nwpu.edu.cn

计量
- 文章访问数: 263
- HTML全文浏览量: 38
- PDF下载量: 21
- 被引次数: 0
出版历程
- 收稿日期: 2015-06-22
- 刊出日期: 2017-04-05

Review on Load Bearing Characteristics of Planetary Roller Screw Mechanism

1.
Shaanxi Engineering Laboratory for Transmissions and Controls, Northwestern Polytechnical University, Xi'an 710072, China

摘要

摘要: 行星滚柱丝杠副具有承载能力大、环境适应性好、寿命长等优点。行星滚柱丝杠副的承载特性主要包括各啮合传力零件的受力分析、轴向变形、螺纹牙载荷分布、滚柱间载荷分配及摩擦磨损特性等。它既是揭示其服役过程中载荷传递、结构变形以及摩擦磨损等机理的重要途径，也是进一步提高行星滚柱丝杠副传动性能和使用寿命的理论基础。首先介绍了行星滚柱丝杠副承载原理，在此基础上说明承载特性各项研究的主要内容及意义，并对目前研究成果进行了总结与分析。最后，对行星滚柱丝杠副承载特性的未来研究方向进行了展望。
- 行星滚柱丝杠副 /
- 承载特性 /
- 轴向变形 /
- 载荷分布 /
- 载荷分配
Abstract: Planetary roller screw mechanism (PRSM) has a lot of advantages such as high load, fine environmental adaptability, long life, et al. Load bearing characteristics of PRSM mainly include the analysis of mechanics of elements, axial deformation, load distribution over threads, load share among rollers, friction moment and wear. Research on load bearing characteristics aims to reveal the mechanisation of load transfer, deformation of components and wear of threads, and is the way to further improve its transmission performance and service life. In this paper, the load bearing principle of PRSM is introduced, and on the basis of it, the main achievements on load bearing characteristics are summarized. Finally, some suggestions are presented for future research on load bearing characteristics of PRSM.
- planetary roller screw mechanism /
- load bearing characteristics /
- axial deformation /
- load distribution /
- load share

HTML全文

参考文献(34)

[1]	刘更,马尚君,佟瑞庭,等.行星滚柱丝杠副的新发展及关键技术[J].机械传动,2012,36(5):103-108 Liu G, Ma S J, Tong R T, et al. New development and key technology of planetary roller screw[J]. Journal of Mechanical Transmission, 2012,36(5):103-108 (in Chinese)
[2]	Brandenburg G, Brückl S, Dormann J, et al. Comparative investigation of rotary and linear motor feed drive systems for high precision machine tools[C]//Proceedings of the 6th International Workshop on Advanced Motion Control. Nagoya, Japan: IEEE, 2000:384-389
[3]	Wang H, Tong M H, Zheng P. Research on contact strength between roller screw pair on hoisting mechanism applied in deep sea crane[C]//3rd International Conference on Applied Mechanics, Materials and Manufacturing. CRC Press, 2013:2001-2005
[4]	Claeyssen F, Janker P, Leletty R, et al. New actuators for aircraft, space and military applications[C]//12th International Conference on New Actuators. Bremen, Germany, 2010:324-330
[5]	Velinsky S A, Chu B, Lasky T A. Kinematics and efficiency analysis of the planetary roller screw mechanism[J]. Mechanical Design, 2009,131(1):011016
[6]	Jones M H, Velinsky S A. Contact kinematics in the roller screw mechanism[J]. Mechanical Design, 2013,135(5):051003
[7]	Liu Y Q, Wang J S, Cheng H X, et al. Kinematics analysis of the roller screw based on the accuracy of meshing point calculation[J]. Mathematical Problems in Engineering, 2015,2015:303972
[8]	刘更,付晓军,马尚君,等.行星滚柱丝杠副啮合原理研究进展[J].机械传动,2015,39(7):1-5 Liu G, Fu X J, Ma S J, et al. Review on meshing theory of the planetary roller screw mechanism[J]. Journal of Mechanical Transmission, 2015,39(7):1-5 (in Chinese)
[9]	马尚君,刘更,佟瑞庭,等.行星滚柱丝杠副轴向弹性变形的有限元分析[J].机械传动,2012,36(7):78-81,98 Ma S J, Liu G, Tong R T, et al. Finite element analysis of axial elastic deformation for planetary roller screw[J]. Journal of Mechanical Transmission, 2012,36(7):78-81,98 (in Chinese)
[10]	Ma S J, Liu G, Tong R T, et al. A new study on the parameter relationships of planetary roller screws[J]. Mathematical Problem in Engineering, 2012,2012:340437
[11]	Otsuka J, Osawa T, Fukada S. A study on the planetary roller screw. Comparison of static stiffness and vibration characteristics with those of the ball screw[J]. Bulletin of the Japan Society of Precision Engineering, 1989,23(3):217-223
[12]	Jones M H, Velinsky S A. Stiffness of the roller screw mechanism by the direct method[J]. Mechanics Based Design of Structures and Machines, 2014,42(1):17-34
[13]	杨家军,韦振兴,朱继生,等.行星滚柱丝杠副载荷分布及刚度计算[J].华中科技大学学报,2011,39(4):1-4 Yang J J, Wei Z X, Zhu J S, et al. Calculation of load distribution of planetary roller screws and static rigidity[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2011,39(4):1-4 (in Chinese)
[14]	Rys J, Lisowski F. The computational model of the load distribution between elements in planetary roller screw[C]//9th International Conference on Fracture & Strength of Solids, Jeju, Korea, June 9-13, 2013
[15]	张文杰,刘更,马尚君,等.不同安装方式下行星滚柱丝杠副载荷分布研究[J].西北工业大学学报,2015,33(2):229-236 Zhang W J, Liu G, Ma S J, et al. Load distribution of planetary roller screw mechanism with different installations[J]. Journal of Northwestern Polytechnical University, 2015,33(2):229-236 (in Chinese)
[16]	Zhang W J, Liu G, Tong R T, et al. Load distribution of planetary roller screw mechanism and its improvement approach[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2016,230(18)
[17]	Abevi F, Daidie A, Chaussumier M, et al. Static load distribution and axial stiffness in a planetary roller screw mechanism[J]. Journal of Mechanical Design, 2015,138(1):012301
[18]	马尚君,刘更,佟瑞庭.行星滚柱丝杠副摩擦力矩及传动效率研究[J].哈尔滨工业大学学报,2013,45(11):74-79 Ma S J, Liu G, Tong R T. The frictional moment and transmission efficiency of planetary roller screw[J]. Journal of Harbin Institute of Technology, 2013,45(11):74-79 (in Chinese)
[19]	Ma S J, Liu G, Tong R T, et al. A frictional heat model of planetary roller screw mechanism considering load distribution[J]. Mechanics Based Design of Structures and Machines: An International Journal, 2015,43(2):164-182
[20]	马尚君,刘更,周建星,等.行星滚柱丝杠副运转过程动态特性分析[J].振动与冲击,2013,32(3):167-171,187 Ma S J, Liu G, Zhou J X, et al. Dynamic characteristic analysis of a planetary roller screw in operating process[J]. Journal of Vibration and Shock, 2013,32(3):167-171,187 (in Chinese)
[21]	Yin Z Y, Jiang C Y, Qin D T, et al. Optimal design and contact analysis for planetary roller screw[J]. Applied Mechanics and Materials, 2011,86:361-364
[22]	Hojjat Y, Agheli M M. A comprehensive study on capabilities and limitations of roller-screw with emphasis on slip tendency[J]. Mechanism and Machine Theory, 2009,44(10):1887-1899
[23]	马尚君.行星滚柱丝杠副结构设计方法及其传动性能研究[D].西安:西北工业大学,2013 Ma S J. Research on structure design method and transmission performances of planetary roller screw[D]. Xi'an: Northwestern Polytechnical University, 2013 (in Chinese)
[24]	杨保哲.行星滚柱丝杠副均载特性及平稳性的分析与研究[D].武汉:华中科技大学,2012 Yang B Z. The analysis and research of load sharing and stationarity for planetary roller screw[D]. Wuhan: Huazhong University of Science and Technology, 2012 (in Chinese)
[25]	Ciavatti V, Dragoni E, Strozzi A. Mechanical analysis of an annular plate transversely loaded at an arbitrary point by a concentrated force[J]. Journal of Mechanical Design, 1992,114(3):335-342
[26]	杨家军,杨保哲,朱继生,等.预紧力对行星滚柱丝杠轴向变形及摩擦的影响[J].机械传动,2011,35(12):16-18,22 Yang J J, Yang B Z, Zhu J S, et al. Effect of preload on axial deformation and friction of planetary roller screw[J]. Journal of Mechanical Transmission, 2011, 35(12): 16-18, 22 (in Chinese)
[27]	山本晃.螺纹连接的理论与计算[M].郭可谦,高素娟,译.上海:上海科学技术文献出版社,1984 Yamamoto S. Theory and calculation of screw thread connection[M]. Guo K Q, Gao S J, trans. Shanghai: Shanghai Science and Technology Literature Press, 1984 (in Chinese)
[28]	马尚君,刘更,付晓军,等.考虑误差的行星滚柱丝杠副滚柱承载分布[J].哈尔滨工业大学学报,2015,47(7):98-102 Ma S J, Liu G, Fu X J, et al. Load distribution of rollers considering errors in planetary roller screw mechanism[J]. Journal of Harbin Institute of Technology, 2015,47(7):98-102 (in Chinese)
[29]	Lemor P C. The roller screw, an efficient and reliable mechanical component of electro-mechanical actuators[C]//Proceedings of the 31st Intersociety Energy Conversion Engineering Conference.Washington, DC: IEEE, 1996:215-220
[30]	Auregan G, Fridrici V, Kapsa P, et al. Experimental simulation of rolling-sliding contact for application to planetary roller screw mechanism[J]. Wear, 2015,332-333:1176-1184
[31]	付晓军,刘更,马尚君,等.行星滚柱丝杠副螺旋曲面啮合机理研究[J].机械工程学报,2016,52(3):26-33 Fu X J, Liu G, Ma S J, et al. Studies on meshing mechanism of helical surfaces in planetary roller screw mechanism[J]. Journal of Mechanical Engineering, 2016,52(3):26-33 (in Chinese)
[32]	尹惠博,毕海峰,姜洪权,等.提高滚珠丝杠传动刚度的几种方法[J].机械工程师,2009,(9):50-52 Yin H B, Bi H F, Jiang H Q, et al. Several methods of improving the driving stiffness of ball-screw[J]. Mechanical Engineer, 2011,(9):50-52 (in Chinese)
[33]	黄祖尧.绿色滚动功能部件在伺服进给系统中助推数控机床绿色制造[J].制造技术与机床,2013,(3):38-43 Huang Z Y. Green rolling components boost in the servo feed system of NC machine tool's green-intelligent manufacturing[J]. Manufacturing Technology & Machine Tool, 2013,(3):38-43 (in Chinese)
[34]	Zhou C G, Feng H T, Chen Z T, et al. Correlation between preload and no-load drag torque of ball screws[J]. International Journal of Machine Tools and Manufacture, 2016,102:35-40