激光超声复合加工硬质合金的切削特性研究

段鹏; 焦锋; 牛赢; 赵波

doi:10.13433/j.cnki.1003-8728.2017.0416

激光超声复合加工硬质合金的切削特性研究

doi: 10.13433/j.cnki.1003-8728.2017.0416

1.
河南理工大学机械与动力工程学院, 河南焦作 454000

基金项目:

国家自然科学基金项目（51075127）资助

详细信息

作者简介:
段鹏(1975-),副教授,博士研究生,研究方向为精密与超精密加工、特种加工,duanpsj@hpu.edu.cn

计量
- 文章访问数: 142
- HTML全文浏览量: 22
- PDF下载量: 9
- 被引次数: 0
出版历程
- 收稿日期: 2015-09-16
- 刊出日期: 2017-04-05

Machinability of Tungsten Carbide with Assistance of Laser and Ultrasonic Vibration

1.
School of Mechanical and Power Engineering, Henan Polytechnic University, Henan Jiaozuo 454000, China

摘要

摘要: 研究了激光加热与超声椭圆振动复合切削条件下，使用CBN（立方氮化硼）刀具对硬质合金材料进行精密加工的切削特性。利用有限元仿真，分析硬质合金材料在普通切削、一维超声振动切削、超声椭圆振动切削与激光超声复合切削4种切削方式下的切削力变化特征。采用超精密车床与YAG激光器、自主研发的超声振动装置等辅助设备，实验研究了激光超声复合精密加工硬质合金的切削特性。通过一系列的对比实验，分析切削参数，如切削速度、切削厚度，对切削力的影响规律。仿真与实验结果表明，由于加工材料的软化和断续切削，激光超声复合辅助加工显著地降低了切削力，硬质合金的切削加工性能得到显著改善，通过工艺参数的优化，可以实现硬质合金的精密加工。
- 硬质合金 /
- 切削力 /
- 激光加热 /
- 超声振动
Abstract: Sintered tungsten carbide was machined using CBN (Cubic boron nitride) tools under the assistance of laser heating and ultrasonic vibration. The variation characteristics of cutting force in the four cutting modes, including common cutting(CC), conventional ultrasonic vibration cutting(CUVC), ultrasonic elliptical vibration cutting (UEVC), laser and ultrasonic vibration combination cutting, were analyzed by means of the finite element analysis(FEA) method. The experiments were carried out on an ultra-precision lathe assisted by YAG laser equipment and self-developed ultrasonic vibration device. The precision cutting characteristics experiment of tungsten carbide with laser and ultrasonic vibration assistance were studied. The influence of the cutting parameters on the cutting force were studied via a series of contrast experiments. The results show that because of the softening of the workpiece material and the interrupted cutting, the laser and ultrasonic vibration combination cutting can greatly reduce the cutting force while machinability of tungsten carbide can be remarkably improved. The experimental results suggest that the precision machining of tungsten carbide can be realized under certain optimized technological parameters, which will effectively cost for precision machining of some other hard and brittle materials.
- tungsten carbide /
- cutting force /
- laser heating /
- ultrasonic vibration

HTML全文

参考文献(17)

[1]	King R F, Tabor D. The strength properties and frictional behaviour of brittle solids[J]. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1954,223(1153):225-238
[2]	Liu K, Li X P, Rahman M. Characteristics of high speed micro-cutting of tungsten carbide[J]. Journal of Materials Processing Technology, 2003, 140(1-3): 352-357
[3]	Liu K, Li X P. Ductile cutting of tungsten carbide[J]. Journal of Materials Processing Technology, 2001,113(1-3):348-354
[4]	Huang S, Liu X, Chen F Z, et al. Tool wear properties of diamond-cutting ferrous metal[J]. Advanced Materials Research, 2014,1027:36-39
[5]	Astashev V K. Effect of ultrasonic vibration of a single-point tool on the process of cutting[J]. Journal of Machinery Manufacture and Reliability, 1992,5(3):65-70
[6]	Wang X, Zhou M, Gan J G K, et al. Theoretical and experimental studies of ultraprecision machining of brittle materials with Ultrasonic Vibration[J]. The International Journal of Advanced Manufacturing Technology, 2002,20(2):99-102
[7]	Suzuki N, Haritani M, Yang J, et al. Elliptical vibration cutting of tungsten alloy molds for optical glass parts[J]. CIRP Annals-Manufacturing Technology, 2007,56(1):127-130
[8]	Nath C, Rahman M, Neo K S. A study on ultrasonic elliptical vibration cutting of tungsten carbide[J]. Journal of Materials Processing Technology, 2009,209(9):4459-4464
[9]	Liu K, Li X P, Rahman M, et al. CBN tool wear in ductile cutting of tungsten carbide[J]. Wear, 2003,255(7-12):1344-1351
[10]	Nath C, Rahman M, Neo K S. Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting[J]. International Journal of Machine Tools and Manufacture, 2009,49(14):1089-1095
[11]	Zhang J G, Suzuki N, Wang Y L, et al. Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond[J]. Journal of Materials Processing Technology, 2014,214(11):2644-2649
[12]	Jau B M. Laser assisted machining of hard to machine material[D]. California: University of Southern California, 1981
[13]	Hsu C Y, Lin Y Y, Lee W S, et al. Machining characteristics of Inconel 718 using ultrasonic and high temperature-aided cutting[J]. Journal of Materials Processing Technology, 2008,198(1-3):359-365
[14]	王扬,马丽心,谢大纲,等.陶瓷材料激光加热辅助切削温度场分析[J].哈尔滨工业大学学报,2001,33(6):785-788 Wang Y, Ma L X, Xie D G, et al. Distribution of temperature fields for laser heating assisted cutting of ceramics[J]. Journal of Harbin Institute of Technology, 2001,33(6):785-788 (in Chinese)
[15]	Gao Y F, Wang G, Bermingham M J, et al. Cutting force, chip formation, and tool wear during the laser-assisted machining a near-alpha titanium alloy BTi-6431S[J]. The International Journal of Advanced Manufacturing Technology, 2015,79(9-12):1949-1960
[16]	Zhang H Z, Kong X J, Yang L J, et al. High temperature deformation mechanisms and constitutive modeling for Al/SiCp/45 metal matrix composites undergoing laser-assisted machining[J]. Materials Science and Engineering: A, 2015,642:330-339
[17]	曹金凤,石亦平.ABAQUS有限元分析常见问题解答[M].北京:机械工程出版社,2009 Cao J F, Shi Y P. FAQ of ABAQUS finite analysis[M]. Beijing: Mechanical Engineering Press, 2009 (in Chinese)