留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

精密微调器实现二轴联动系统精度增长的研究

许吉敏 张飞 卫洋洋 陈润霖 袁小阳

许吉敏, 张飞, 卫洋洋, 陈润霖, 袁小阳. 精密微调器实现二轴联动系统精度增长的研究[J]. 机械科学与技术, 2017, 36(4): 493-497. doi: 10.13433/j.cnki.1003-8728.2017.0401
引用本文: 许吉敏, 张飞, 卫洋洋, 陈润霖, 袁小阳. 精密微调器实现二轴联动系统精度增长的研究[J]. 机械科学与技术, 2017, 36(4): 493-497. doi: 10.13433/j.cnki.1003-8728.2017.0401
Xu Jimin, Zhang Fei, Wei Yangyang, Chen Runlin, Yuan Xiaoyang. Precision Growth of Two-axis Linkage System Realized by Precise Fine-adjustor[J]. Mechanical Science and Technology for Aerospace Engineering, 2017, 36(4): 493-497. doi: 10.13433/j.cnki.1003-8728.2017.0401
Citation: Xu Jimin, Zhang Fei, Wei Yangyang, Chen Runlin, Yuan Xiaoyang. Precision Growth of Two-axis Linkage System Realized by Precise Fine-adjustor[J]. Mechanical Science and Technology for Aerospace Engineering, 2017, 36(4): 493-497. doi: 10.13433/j.cnki.1003-8728.2017.0401

精密微调器实现二轴联动系统精度增长的研究

doi: 10.13433/j.cnki.1003-8728.2017.0401
基金项目: 

国家自然科学基金项目(51275376)资助

详细信息
    作者简介:

    许吉敏(1989-),博士研究生,研究方向为机械设计、高温超导磁悬浮轴承等,xujimin1989@stu.xjtu.edu.cn

    通讯作者:

    袁小阳(联系人),教授,博士,xyyuan@mail.xjtu.edu.cn

Precision Growth of Two-axis Linkage System Realized by Precise Fine-adjustor

  • 摘要: 控制系统的改进和摩擦副优化设计对先进二轴联动系统精度的提升效果有限。提出通过引入精密微调器与已有的二轴系统实现功能并联,在不干扰已有系统可靠性和大范围运动功能的前提下,实现小范围内运动精度的成倍增长。针对两轴垂直和两轴平行的两类二轴联动系统,分别提出了压电晶体型角度微调器以实现角度精度的增长、电磁液型位移微调器以实现位移精度的增长,分析了它们的工作原理和作用效果。结果表明,提出的精度增长方法能够满足工程预期目标。
  • [1] 张绪祥,詹华西.双摆头五轴加工后处理的修改及编程验证[J].机床与液压,2014,42(20):166-168 Zhang X X, Zhan H X. Modification and programming verification during post-treatment process of double pendulum head five-axis[J]. Machine Tool & Hydraulics, 2014,42(20):166-168 (in Chinese)
    [2] 丁洪生,黄志晨,刘永俊,等.一种串联机器人的随机误差分析方法[J].北京理工大学学报,2014,34(9):892-896 Ding H S, Huang Z C, Liu Y J, et al. A random error analysis method for serial robot[J]. Transactions of Beijing Institute of Technology, 2014,34(9):892-896 (in Chinese)
    [3] 李慧,沈湘衡.光电经纬仪的机电动力学建模与耦合[J].光学精密工程,2007,15(10):1577-1582 Li H, Shen X H. Electromechanical dynamic modeling and coupling for optoelectronic theodolite[J]. Optics and Precision Engineering, 2007,15(10):1577-1582 (in Chinese)
    [4] 许吉敏,王颖,袁小阳,等.多轴跟踪系统中摩擦力矩的影响及其补偿技术[C]//全国青年摩擦学学术会议文集.青岛,2013:H101-H105 Xu J M, Wang Y, Yuan X Y, et al. Effect of friction torque and compensation technology for multi-axis tracking system[C]//China National Youth Conference on Tribology, June 3-4, 2013. Qiaodao, 2013: H101-H105 (in Chinese)
    [5] 张锦江,陈兴林,冯汝鹏.基于摩擦自适应补偿的转台变结构控制器设计[J].哈尔滨工业大学学报,2000,32(4):92-95 Zhang J J, Chen X L, Feng R P. Design of variable structure controller based on friction adaptive compensation[J]. Journal of Harbin Institute of Technology, 2000,32(4):92-95 (in Chinese)
    [6] 杨元恺,郎需英.精密转台中摩擦力矩的动态补偿[J].自动化学报,1983,9(4):248-252 Yang Y K, Lang X Y. Dynamic compensation for friction moment in accurate test table[J]. Acta Automatica Sinica, 1983,9(4):248-252 (in Chinese)
    [7] 余炜.空间二轴系统机电动力学分析与运动控制仿真[D].西安:西安交通大学,2007 Yu W. Analysis on mechanical-electric dynamics and motion control simulation of space two-axis system[D]. Xi'an: Xi'an Jiaotong University, 2007 (in Chinese)
    [8] 叶军.卫星用固体润滑轴承的研究[D].合肥:合肥工业大学,2004 Ye J. Study on solid-lubricated bearings used in satellite[D]. Hefei: Hefei University of Technology, 2004 (in Chinese)
    [9] Zhao Z M, Yuan X Y. Backstepping designed sliding mode control for a two-axis tracking system[C]//Proceedings of the 5th IEEE Conference on Industrial Electronics and Applications. Taichung: IEEE, 2010:1593-1598
    [10] Zhao Z M, Yuan X Y, Guo Y, et al. Modelling and simulation of a two-axis tracking system[J]. Proceedings of the Institution of Mechanical Engineers Part I-Journal of Systems and Control Engineering, 2010,224(12):125-137
    [11] Li B, Hullender D. Self-tuning controller for nonlinear inertial stabilization systems[J]. IEEE Transactions on Control Systems Technology, 1998,6(3):428-434
    [12] Xu J M, Hong H L, Yuan X Y, et al. Tribo-dynamics analysis of satellite-bone multi-axis linkage system[J]. Journal of Applied Nonlinear Dynamics, 2015,4(3):239-250
    [13] Quintero F, Pou J, Lusquiños F, et al. Comparative study of the influence of the gas injection system on the Nd: yttrium-aluminum-garnet laser cutting of advanced oxide ceramics[J]. Review of Scientific Instruments, 2003,74(9):4199-4205
    [14] Ketting H O, Olsen F. High pressure off-axis laser cutting of stainless steel and aluminum[C]//Proceeding of International Conference on Laser Advanced Materials Processing. ILAMP, 1992:607-612
    [15] Miller E D, de Callafon R A. Dual-stage servo control for an optical pointing system[C]//Proceedings of Conference on Information Storage and Processing Systems, Santa Clara, California, USA: ASME, 2013: ISPS2013-2938
    [16] 李星辉.基于公理化方法的电磁驱动设计及实验[D].西安:西安交通大学,2011 Li X H. Design and experiment of electromagnetic drive based on axiomatic method[D]. Xi'an: Xi'an Jiaotong University, 2011 (in Chinese)
  • 加载中
计量
  • 文章访问数:  199
  • HTML全文浏览量:  29
  • PDF下载量:  10
  • 被引次数: 0
出版历程
  • 收稿日期:  2015-11-28
  • 刊出日期:  2017-04-05

目录

    /

    返回文章
    返回