Study on Surface Radiation Noise Source Identification of Diesel Engine
-
摘要: 以某单缸柴油机为研究对象,建立近场声压与表面振速联合信息法对该柴油机进行了表面辐射噪声源识别的研究。首先,利用近场声压阵面扫描快速定位了标定工况下主要辐射表面的主要辐射部件;再基于平板结构的辐射模型,研究分析了主要辐射部件的声辐射能力;然后,在综合考虑声辐射系数影响因素基础上,识别分析了主要辐射部件结构表面噪声的辐射特性,与传统方法相比提高了识别精度;再结合隔声法深入地识别了主要辐射部件结构噪声中的主要噪声源;最后,对建立方法识别结果进行了降噪试验验证。该识别方法可为明确柴油机降噪目标以及结构低噪声设计目标提供理论指导。Abstract: In this paper, an experimental study on the surface radiation noise source identification of the diesel engine was carried out, by the proposed joint information method of near field sound pressure and surface velocity. A single cylinder diesel engine was used in the experiment. Firstly, main radiating components of main radiating surface were identified quickly by near field scan method under engine calibration conditions; the radiation capability of main radiating components was studied based on plate radiation model. Secondly, on the basis of considering influence factor of the sound radiation coefficient, radiation characteristics of structural surface noise for main radiating components were analyzed, compared with the traditional method, identification accuracy was improved; the main noise source from structural noise of main radiating components was further identified with sound insulation. Lastly, recognition results got by the proposed method were verified through noise abatement test. This identification method can provide theoretical guidance for defining goals of the diesel engine noise abatement and low noise structure design.
-
Key words:
- diesel engine /
- noise source /
- identification /
- radiation characteristics /
- noise abatement
-
[1] Liu Y H, Hao Z Y, Bi F R, et al. Engine noise source identification with different methods[J]. Transactions of Tianjin University, 2002,8(3):174-177 [2] 邓江华,顾灿松,刘献栋,等.基于声阵列技术的汽车噪声源识别及贡献量分析[J].振动工程学报,2010,23(6):630-635 Deng J H, Gu C S, Liu X D, et al. Sound source identification and contribution analysis based on acoustic array technology[J]. Journal of Vibration Engineering, 2010,23(6):630-635(in Chinese) [3] 刘海,张俊红,毕凤荣,等. 柴油机辐射噪声预测与低噪声改进设计[J].内燃机学报,2011,29(3):265-269 Liu H, Zhang J H, Bi F R, et al. Radiation noise prediction and low-noise modification of diesel engine[J]. Transactions of CSICE, 2011,29(3):265-269(in Chinese) [4] 孟浩东,李舜酩,吕志翔,等.柴油机前端齿轮室总成异响源识别分析与改进[J].中国机械工程,2013,24(17):2295-2300 Meng H D, Li S M, Lü Z X, et al. Identification analysis and improvement on abnormal noise source for front gear chamber assembly of diesel engine[J]. China Mechanical Engineering, 2013,24(17):2295-2300(in Chinese) [5] Nivesrangsan P, Steel J A, Reuben R L. Source location of acoustic emission in diesel engines[J]. Mechanical Systems and Signal Processing, 2007,21(2):1103-1114 [6] Pruvost L, Leclere Q, Parizet E. Diesel engine combustion and mechanical noise separation using an improved spectrofilter[J]. Mechanical Systems and Signal Processing, 2009,23(7):2072-2087 [7] Shu G Q, Liang X Y. Identification of complex diesel engine noise sources based on coherent power spectrum analysis[J]. Mechanical Systems and Signal Processing, 2007,21(1):405-416 [8] 陈步达,王诗恩,周孔亢.车辆主要噪声源识别方法的研究[J].机械工程学报,1997,33(6):77-80 Chen B D, Wang S E, Zhou K K. Study of identification methods of main noise sources of a vehicle[J]. Chinese Journal of Mechanical Engineering, 1997,33(6):77-80(in Chinese) [9] 梁兴雨,舒歌群.柴油机噪声源的识别及降噪研究[J].兵工学报,2006,27(4):587-591 Liang X Y, Shu G Q. Noise source identification and noise reduction for diesel engine[J]. Acta Armamentarii, 2006,27(4):587-591(in Chinese) [10] 岳东鹏,郝志勇,刘月辉,等.柴油机表面辐射噪声源识别的研究[J].汽车工程,2004,26(5):613-615,618 Yue D P, Hao Z Y, Liu Y H, et al. A study on surface noise sources identification for diesel engine[J]. Automotive Engineering, 2004,26(5):613-615,618(in Chinese) [11] 舒歌群,马维忍,梁兴雨,等.柴油机薄壁件表面辐射噪声的研究[J].内燃机工程,2009,30(2):25-28,33 Shu G Q, Ma W R, Liang X Y, et al. Radiation noise of external thin-wall components in diesel engine[J]. Chinese Internal Combustion Engine Engineering, 2009,30(2):25-28,33(in Chinese) [12] 蔡相儒,魏长生,沈秀奇,等.发动机子声源隔声识别法的研究及应用[J].内燃机工程,2010,31(4):105-108 Cai X R, Wei C S, Shen X Q, et al. Research and application of engine sub-sound source noise-isolation identification[J]. Chinese Internal Combustion Engine Engineering, 2010,31(4):105-108(in Chinese) [13] 何天明,蒋维铭,乔秀娟,等.6105QA柴油机气门室盖辐射噪声计算及控制[J].武汉工学院学报,1995,17(4):12-18 He T M, Jiang W M, Qiao X J, et al. Radiation noise of 6105QA diesel valve chamber cover calculation and its control[J]. Journal of Wuhan Institute of Technology, 1995,17(4):12-18(in Chinese) [14] 张志,孟少平,周臻,等.振动台试验加速度积分方法[J].振动、测试与诊断,2013,33(4):627-633 Zhang Z, Meng S P, Zhou Z, et al. Numerical integration method of acceleration recodes for shaking table test[J]. Journal of Vibration, Measurement & Diagnosis, 2013,33(4):627-633(in Chinese) [15] 顾名坤,吕振华.基于振动加速度测量的振动速度和位移信号识别方法探讨[J].机械科学与技术,2011,30(4):522-526 Gu M K, Lü Z H. Identification of a mechanism's vibration velocity and displacement based on the acceleration measurement[J]. Mechanical Science and Technology for Aerospace Engineering, 2011,30(4):522-526(in Chinese)
点击查看大图
计量
- 文章访问数: 184
- HTML全文浏览量: 21
- PDF下载量: 7
- 被引次数: 0