Numerical Analysis on Impact of Inlet Guide Vane on Vacuum Centrifugal Compressor Inner Flow
-
摘要: 对一套抽真空离心压缩机部分级的入口导叶调节能力进行研究,分别对4种情况,即入口不带导叶、入口导叶角度90°、70°、60°的压缩机级内流动进行了数值模拟,通过对模拟结果进行分析,揭示出导叶调节对抽真空离心压缩机性能影响的规律。最后通过对该平面结构导叶的压缩机级内不同叶片高度的流场进行分析,发现在靠近导叶叶根出口的气流状态与叶轮叶片安装角匹配较差,进而对曲面结构的导叶应用进行了展望。Abstract: This paper is about the study on the inlet guide vane adjustment ability on part stage of vacuum centrifugal compressor, respectively to four kinds of circumstances, namely, entry without inlet guide vane, inlet guide vane 90°, 70°, 60°, and the flow performances are simulated in compressor stage. Through analyzing the simulation results, the laws of performance influence about inlet guide vane on vacuum centrifugal compressor are revealed. Finally, through analyzing the flow fields with the different blade heights based on planar structure inlet guide vane, we can see that the gas flow near blade roots at guide vane outlet does not match the impeller blade installation angle, and looking forward to guide vane application of curved face structure.
-
[1] Coppinger M,Swain E.Performance prediction of an industrial centrifugal compressor inlet guide vane system[J].Proceedings of the Institution of Mechanical Engineers,Part A:Journal of Power and Energy,2000,214(2):153-164 [2] Baba T,Fukao Y,Nishikawa T,et al.Swirl flow in a centrifugal compressor suction pipe with inlet guide vanes[J]. "R&D" Kobe Steel Engineering Reports,1999,49(1):17-20 [3] 谭佳健,祁大同,王锐,等.离心压缩机进口导叶调节性能的数值分析[C]//中国工程热物理学会2008年流体机械学术会议论文集.北京:中国工程热物理学会,2008 Tan J J,Qi D T,Wang R,et al.Numerical analysis of centrifugal compressor inlet guide vane regulation performance[C]//Fluid Machinery Academic Conference Proceedings.Beijing:Chinese Academy of Engineering Thermal Physics,2008(in Chinese) [4] Swain E.The design of an inlet guide vane assembly for an industrial centrifugal compressor[J].Energy Saving in the Design and Operation of Compressors,1996,(13):11-22 [5] 温选锋,袁民建,谭佳健,等.离心压缩机进口导叶流场的数值模拟[J].流体机械,2008,36(8):12-15 Wen X F,Yuan M J,Tan J J,et al.Numerical simulation of the flow field for inlet guide vane in centrifugal compressor[J].Fluid Machinery,2008,36(8):12-15(in Chinese) [6] 肖军,谷传纲,高闯,等.考虑进气预旋的离心压缩机流动的数值分析[J].动力工程,2008,28(3):400-403 Xiao J,Gu C G,Gao C,et al.Numerical analysis of the flow in centrifugal compressor in consideration of inlet pre-whirl[J].Journal of Power Engineering,2008,28(3):400-403(in Chinese) [7] 周莉,席光,蔡元虎,等.离心压缩机进口导叶/叶轮动静相干的数值研究[J].航空动力学报,2007,22(10):1715-1721 Zhou L,Xi G,Cai Y H,et al.Numerical investigation on IGV/impeller interaction in a centrifugal compressor stage[J].Journal of Aerospace Power,2007,22(10):1715-1721(in Chinese) [8] 周莉,蔡元虎.离心压缩机内进口导叶后面流场的实验研究[J].实验流体力学,2008,22(1):17-20,45 Zhou L,Cai Y H.Experimental investigation of the flow field behind the inlet guide vane of the centrifugal compressor[J].Journal of Experiments in Fluid Mechanics,2008,22(1):17-20,45(in Chinese) [9] 周莉,席光,蔡元虎,等.进口导叶/叶轮/扩压器非定常相干的数值研究[J].西北工业大学学报,2007,25(5):625-629 Zhou L,Xi G,Cai Y H,et al.Numerical investigation of unsteady igv-impeller-diffuser interaction in a centrifugal compressor[J].Journal of Northwestern Polytechnical University,2007,25(5):625-629(in Chinese) [10] 刘天一,祁大同,谭佳健,等.导叶通道当量预旋半径对离心压缩机性能的影响[J].西安交通大学学报,2011,45(3):91-94 Liu T Y,Qi D T,Tan J J,et al.Influence of equivalent prewhirl radius of guide vane passage on performance of centrifugal compressor[J].Journal of Xi'an JiaoTong University,2011,45(3):91-94(in Chinese) [11] 刘天一,王锐,谭佳健,等.改变进气通道结构提高离心压缩机进口导叶调节性能[J].流体机械,2011,39(8):19-23 Liu T Y,Wang R,Tan J J,et al.Improve the regulating performance of centrifugal compressor inlet guide vanes by modifying the geometry of the inlet flow channel[J].Fluid Machinery,2011,39(8):19-23(in Chinese) [12] 姜华,席光,宫武旗.不同导叶预旋角下离心压缩机的时序效应[J].西安交通大学学报,2010,44(7):120-124 Jiang H,Xi G,Gong W Q.Clocking effect under different inlet guide vanes prewhirl angles in a centrifugal compressor[J].Journal of Xi'an Jiaotong University,2010,44(7):120-124(in Chinese) [13] 姜华,席光.不同导叶预旋角下离心压缩机径向间隙区雷诺应力的测量[J].西安交通大学学报,2012,46(4):125-131 Jiang H,Xi G.Measurements for reynolds stresses under different inlet prewhirl in centrifugal compressor[J].Journal of Xi'an Jiaotong University,2010,44(7):120-124(in Chinese) [14] 冀春俊,范朝阳,张阳,等.某离心式压缩机可调进口导叶叶型研究[J].热科学与技术,2013,12(2):131-134 Ji C J,Fan Z Y,Zhang Y,et al.Study on blade profiles of variable inlet guide vanes of centrifugal compressor[J].Journal of Thermal Science and Technology,2013,12(2):131-134(in Chinese) [15] 祁明旭.轴流透平级内三维复杂流动的数值模拟及小展弦比叶栅的特性实验[D].西安:西安交通大学,2002 Qi M X.Numerical study on 3-D complex flows in axial turbine stages and experimental investigation on low aspect ratio cascades[D].Xi'an:Xi'an Jiaotong University,2002(in Chinese)
点击查看大图
计量
- 文章访问数: 92
- HTML全文浏览量: 23
- PDF下载量: 8
- 被引次数: 0