留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

钢丝绳传动机器人运动学的回路分析方法

桑宏强 许丽萍 贠今天 金国光 常丽敏

桑宏强, 许丽萍, 贠今天, 金国光, 常丽敏. 钢丝绳传动机器人运动学的回路分析方法[J]. 机械科学与技术, 2016, 35(7): 1011-1017. doi: 10.13433/j.cnki.1003-8728.2016.0705
引用本文: 桑宏强, 许丽萍, 贠今天, 金国光, 常丽敏. 钢丝绳传动机器人运动学的回路分析方法[J]. 机械科学与技术, 2016, 35(7): 1011-1017. doi: 10.13433/j.cnki.1003-8728.2016.0705
Sang Hongqiang, Xu Liping, Yun Jintian, Jin Guoguang, Chang Limin. Loop Analysis Method for Kinematics of Steel Cable-driven Robot[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(7): 1011-1017. doi: 10.13433/j.cnki.1003-8728.2016.0705
Citation: Sang Hongqiang, Xu Liping, Yun Jintian, Jin Guoguang, Chang Limin. Loop Analysis Method for Kinematics of Steel Cable-driven Robot[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(7): 1011-1017. doi: 10.13433/j.cnki.1003-8728.2016.0705

钢丝绳传动机器人运动学的回路分析方法

doi: 10.13433/j.cnki.1003-8728.2016.0705
基金项目: 

国家自然科学基金青年基金项目(51205287)与天津市高等学校科技发展基金计划项目(20110402)资助

详细信息
    作者简介:

    桑宏强(1978-),副教授,博士,研究方向为医疗机器人技术,多体系统动力学与控制,slhfq@163.com

Loop Analysis Method for Kinematics of Steel Cable-driven Robot

  • 摘要: 研究分析了一类2N条钢丝绳驱动N个自由度机器人的运动学,其运动学分析可通过推导除去钢丝绳后的开环链机器人关节角位移与末端执行器之间的运动学模型和关节角位移与电机转子角位移之间的运动学模型两个步骤完成。在运动学分析的基础上,提出了用回路矩阵和等效半径矩阵描述钢丝绳传动机器人运动学的回路分析方法。根据钢丝绳传动原理,通过观察法可直接列写回路矩阵和电机驱动空间等效半径矩阵,从而得到电机转子角位移与关节角位移之间的映射关系模型,解耦了由于钢丝绳传动导致机器人关节之间的运动耦合。实现了电机驱动空间、关节空间和笛卡尔空间之间完整的运动学映射,加快和简化了钢丝绳传动机器人运动学的建模和分析过程。最后,以Utah/MIT手指为例进行了运动学分析,比较Matlab运算和Solidworks Motion仿真的末端运动轨迹,验证了回路分析方法的正确性。
  • [1] Jacobsen S, Iversen E, Knutti D, et al. Design of the Utah/M. I. T. dextrous hand[C]//Proceedings of IEEE International Conference on Robotics and Automation, San Francisco, CA, USA: IEEE, 1986:1520-1532
    [2] Ali M S, Kyriakopoulos K J, Stephanou H E. The kinematics of the anthrobot-2 dextrous hand[C]//Proceedings of IEEE International Conference on Robotics and Automation, Atlanta, GA: IEEE, 1993,3:705-710
    [3] Rouff C F. Multi-fingered robotic hand: U.S., 4921293[P]. 1990-01-05
    [4] Sang H Q, Wang S X, Li J M, et al. Control design and implementation of a novel master-slave surgery robot system, MicroHand a[J]. The International Journal of Medical Robotics and Computer Assisted Surgery, 2011,7(3):334-347
    [5] 王树新,丁杰男,贠今天,等.显微外科手术机器人-"妙手"系统的研究[J].机器人,2006,28(2):130-135 Wang S X, Ding J N, Yun J T, et al. A robotic system for microsurgery: the "MicroHand" system[J]. Robot, 2006,28(2):130-135 (in Chinese)
    [6] Pham C B, Yeo S H, Yang G L, et al. Workspace analysis of fully restrained cable-driven manipulators[J]. Robotics and Autonomous Systems, 2009,57(9):901-912
    [7] Williams II R L, Gallina P. Planar cable-direct-driven robots: design for wrench exertion[J]. Journal of Intelligent and Robotic Systems, 2002,35(2):203-219
    [8] Pusey J, Fattah A, Agrawal S, et al. Design and workspace analysis of a 6-6 cable-suspended parallel robot[J]. Mechanism and Machine Theory, 2004,39(7):761-778
    [9] Jacobsen S C, Wood J E, Knutti D F, et al. The Utah/MIT dexterous hand: work in progress[J]. The Inter-National Journal of Robotics Research, 1984,3(4):21-50
    [10] Chang S L, Lee J J, Yen H C. Kinematic and compliance analysis for tendon-driven robotic mechanisms with flexible tendons[J]. Mechanism and Machine Theory, 2005,40(6):728-739
    [11] Tsai L W. Robot analysis: the mechanics of serial and parallel manipulators[M]. New York: Wiley, 1999
    [12] Tsai L W, Lee J J. Kinematic analysis of tendon-driven robotic mechanisms using graph theory[J]. ASME Journal of Mechanisms, Transmissions, and Automation in Design, 1989,111(1):59-65
    [13] Uyguroğlu M, Demirel H. Kinematic analysis of tendon-driven robotic mechanisms using oriented graphs[J]. Acta Mechanica, 2006,182(3-4):265-277
    [14] Uyguroğlu M, Demirel H. Kinematic analysis of bevel-gear trains using graphs[J]. Acta Mechanica, 2005,177(1-4):19-27
  • 加载中
计量
  • 文章访问数:  236
  • HTML全文浏览量:  39
  • PDF下载量:  11
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-04-25
  • 刊出日期:  2016-07-05

目录

    /

    返回文章
    返回