Gear Grinding Tool Setting Method Based on Worst Angle of Tooth Space Edges
-
摘要: 在齿轮磨削加工的齿轮测量与对刀过程中,由于齿轮磨削余量很少,如果只对一个或几个齿槽对刀,由于各个齿槽起始角度和终止角度分布的差异,砂轮往往会对某些齿槽的某一边过度磨削,而对某些齿槽的某一边磨不上。为此,提出了基于最差齿槽边沿角度的齿轮磨削对刀法,该方法对齿轮的全部(或部分)齿槽起始角和终止角进行测量,找出偏差最大的齿槽起始边沿角度和终止边沿角度,由此计算最佳的对刀角度,以保证偏差最大的齿槽起始边沿和终止边沿都有大致相近的磨削量。Abstract: The gear grinding allowances for gear measurement and tool setting are small. If only one or a few gear tooth space edges are measured or adjusted, some gear tooth space edges may be grinded heavily and other gear tooth space edges may not be grinded. Therefore we propose the method mentioned in the title. The angles of all (or some) of gear tooth space edges are measured. The optimal tool setting angle is calculated by the worst angles of gear tooth space start edge and gear tooth space end edge. Therefore, the most discrete gear tooth space start and end edges can be grinded with almost the same grinding allowance.
-
Key words:
- gear grinding /
- gear measurement /
- gear tooth space edge /
- tool setting
-
[1] 李学光,张树仁,史国权,等.插齿刀凸曲前刀面加工对刀方法研究[J].中国机械工程,2012,23(22):2685-2688,2738 Li X G, Zhang S R, Shi G Q, et al. Research on tool presetting method for manufacturing of pinion cutter with convex curved rake face[J]. China Mechanical Engineering, 2012,23(22):2685-2688,2738(in Chinese) [2] 梁永芳.数控滚齿机的对刀计算[J].甘肃工业大学学报,1997,23(3):46-48 Liang Y F. Cutter setting calculation for numerically controlled gear hobbing machine[J]. Journal of Gansu University of Technology, 1997,23(3):46-48(in Chinese) [3] Bouzakis K D, Antoniadis A. Optimal selection of machining data in gear hobbing regarding the tool mechanical stresses occuring during the cutting process[J]. CIRP Annals-Manufacturing Technology, 1988,37(1):109-112 [4] 常家东.加工中心对刀仪器研制[J].机床与液压,2005,(8):32-33 Chang J D. Digital tool setting gauge for machining center[J]. Machine Tool & Hydraulics, 2005,(8):32-33(in Chinese) [5] 张秀萍.数控机床的对刀原理及常用的对刀方法[J].机械制造与自动化,2010,39(4):73-75 Zhang X P. Principles and common methods of tool setting in numerical control machine[J]. Machine Building & Automation, 2010,39(4):73-75(in Chinese) [6] 高雪强.非圆齿轮传动技术概述[J].机械传动,2003,27(3):5-8 Gao X Q. Summation of noncircular gear drive technology[J]. Journal of Mechanical Transmission, 2003,27(3):5-8(in Chinese) [7] 田佩林.齿轮加工的对定误差分析计算[J].装备制造技术,2004,(3):22-24,62 Tian P L. Analytical calculation to errors between positioning and tool-setting in gear-machining[J]. Equipment Manufacturing Technology, 2004,(3):22-24,62(in Chinese) [8] 伍利群,毕红霞.轴向异形齿轮数控滚切加工对刀点坐标的确定[J].煤矿机械,2008,29(6):109-112 Wu L Q, Bi H X. Cutter setting coordinate calculation for axially heteromorphic gears with CNC gear-hobbing machine[J]. Coal Mine Machinery, 2008,29(6):109-112(in Chinese) [9] 陆卫东,沈勇,吴健.激光对中仪的原理及应用[J].机械制造与自动化,2006,35(3):137-139,142 Lu W D, Shen Y, Wu J. Principle and application of laser aligner[J]. Machine Building & Automation, 2006,35(3):137-139,142(in Chinese) [10] 王俊元,刘刚.刀具几何参数光学测量系统设计与分析[J].测试技术学报,2007,21(6):510-514 Wang J Y, Liu G. Analysis and design of optical measuring system for geometric parameters of tools[J]. Journal of Test and Measurement Technology, 2007,21(6):510-514(in Chinese) [11] 田芳勇,胡赤兵,姜衍仓.非圆齿轮滚齿加工的一种自动对刀方法[J].兰州理工大学学报,2010,36(4):41-43 Tian F Y, Hu C B, Jiang Y C. New method of automatic tool adjustment for non-circular gear hobbing[J]. Journal of Lanzhou University of Technology, 2010,36(4):41-43(in Chinese) [12] 姜衍仓,田芳勇.光电编码器在非圆齿轮滚齿加工自动对刀中的应用[J].机械设计与制造,2011,(3):167-168 Jiang Y C, Tian F Y. Automatic tool adjustment for non-circular gear hobbing[J]. Machinery Design & Manufacture, 2011,(3):167-168(in Chinese) [13] Cao X M, Fang Z D, Xu H, et al. Design of pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors[J]. Chinese Journal of Aeronautics, 2008,21(2):179-186 [14] 李学光,张树仁,史国权,等.插齿刀凸曲前刀面磨削方法研究[J].中国机械工程,2011,22(21):2551-2554 Li X G, Zhang S R, Shi G Q, et al. Research on grinding method for convex curved rake face of pinion cutter[J]. China Mechanical Engineering, 2011,22(21):2551-2554(in Chinese) [15] Li X G, Shi G Q, Zhang S R, et al. Experimental research on machining process for convex curved rake face of pinion cutter[J]. Applied Mechanics and Materials, 2011,80-81:495-500 [16] Li X G, Zhang S R, Shi G Q, et al. Development of processing machine for convex curved rake face of pinion cutter[J]. Applied Mechanics and Materials, 2011,121-126:1614-1619 [17] 李学光,张树仁,史国权,等.插齿刀凸曲前刀面加工对刀方法研究[J].中国机械工程,2012,23(22):2685-2688,2738 Li X G, Zhang S R, Shi G Q, et al. Research on tool presetting method for manufacturing of pinion cutter with convex curved rake face[J]. China Mechanical Engineering, 2012,23(22):2685-2688,2738(in Chinese) [18] Emura T, Arakawa A, Hashitani M. Development of high speed servo-spindle for NC gear grinding machines[J]. Mechatronics, 1992,2(5):417-432 [19] 李郝林,陈飒,华俭.齿轮成型磨削齿形误差在线测量技术[J].计量学报,2005,26(2):125-127 Li H L, Chen S, Hua J. On-line measuring technique for total profile error in gear molding milling[J]. Acta Metrologica Sinica, 2005,26(2):125-127(in Chinese) [20] Suh S H, Lee E S, Kim H C, et al. Geometric error measurement of spiral bevel gears using a virtual gear model for STEP-NC[J]. International Journal of Machine Tools and Manufacture, 2002,42(3):335-342 [21] Sánchez J, Ruiz G, Padilla S, et al. Geometrical principles for analysing hypoidal gears in Coordinate Measuring Machines:Involutometry, protocols, data interpretation. Measurement, 2012,45(10):2368-2375 [22] Benn S,张华坚.精密齿轮的成形磨削与拓扑修形[J].航空制造技术,2006,(1):102-103 Benn S, Zhang H J. Form grinding and topologically modifying of precise gear[J]. Aeronautical Manufacturing Technology, 2006,(1):102-103(in Chinese)
点击查看大图
计量
- 文章访问数: 129
- HTML全文浏览量: 37
- PDF下载量: 6
- 被引次数: 0