考虑边缘和寄生电容的微加速度计的非线性误差研究

何江波; 谢进; 何晓平; 杜连明; 周吴

doi:10.13433/j.cnki.1003-8728.2016.0517

考虑边缘和寄生电容的微加速度计的非线性误差研究

doi: 10.13433/j.cnki.1003-8728.2016.0517

1.
西南交通大学机械工程学院, 成都 610031;
2.
中国工程物理研究院电子工程研究所, 四川绵阳 621900;
3.
电子科技大学机械电子工程学院, 成都 611731

基金项目:

国家自然科学基金项目(51175437)资助

详细信息

作者简介:
何江波(1987-),博士,研究方向为MEMS器件的设计及稳定性分析,chuihaol@aliyun.com

通讯作者:
谢进(联系人),教授,博士生导师,xj_6302@263.net

计量
- 文章访问数: 226
- HTML全文浏览量: 38
- PDF下载量: 8
- 被引次数: 0
出版历程
- 收稿日期: 2014-06-04
- 刊出日期: 2016-05-05

Research on Nonlinear Error of Micro-accelerometers Considering the Fringe and Parasitic Capacitance

1.
School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China;
2.
Institute of Electronic Engineering, China Academy of Engineering Physics, Sichuan Mianyang 621900, China;
3.
School of Mechatronics Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China

摘要

摘要: 为了使微加速度计满足线性度指标,准确计算微加速度计的非线性误差是非常必要的。在考虑边缘和寄生电容的前提下,提出了计算微加速度计的非线性误差的方法。首先根据表芯结构的电容分布特点建立了其等效电路模型,并推导了微加速度计的输出电压与检测电容和寄生电容之间的关系式,其中检测电容包含了边缘电容;其次,基于有限元法,分别提出了计算微加速度计的寄生电容和检测电容的方法;最后建立了微加速度计的输出电压与输入加速度之间的关系式,并基于三次多项式拟合,推导出微加速度计的非线性误差的计算公式。通过对比分析非线性误差的理论计算结果与实验测量结果,提出的方法的正确性得到了验证。
- 微加速度计 /
- 边缘电容 /
- 寄生电容 /
- 非线性误差 /
- 有限元法
Abstract: In order to make the micro-accelerometers satisfy the specification of linearity, it is very necessary to calculate the nonlinear error of micro-accelerometers accurately. A method for calculating nonlinear error that taking the fringe capacitance and parasitic capacitance into consideration is proposed in this paper. At first, the equivalent circuit model of micro-accelerometers is established on the basis of distribution characteristics of capacitance, and the formula connecting the voltage output with measuring capacitance and parasitic capacitance is derived, where the fringe capacitance is included in the measuring capacitance. Then, based on the finite element method, the methods for calculating the parasitic capacitance and measuring capacitance are proposed respectively. Finally, the relation between the output voltage and the input acceleration of micro-accelerometers is established, and the formula for nonlinear error of micro-accelerometers is derived based on the cubic polynomial fitting. By comparing the theoretical results and the experimental results of nonlinear error, the correctness of the method proposed in this paper is demonstrated.
- finite element method /
- fringe capacitance /
- Micro-accelerometer /
- nonlinear error /
- parasitic capacitance

HTML全文

参考文献(10)

[1]	戴强,王向展,罗谦,等.电容式微加速度计开环模式的非线性模型[J].传感技术学报,2007,20(3):512-515 Dai Q, Wang X Z, Luo Q, et al. Nonlinear model of micro-machined capacitive accelerometer operating in open-loop mode[J]. Chinese Journal of Sensors and Actuators, 2007,20(3):512-515 (in Chinese)
[2]	周吴,何晓平,苏伟,等.力平衡式微加速度计的非线性误差确定[J].中国机械工程,2009,20(15):1791-1793 Zhou W, He X P, Su W, et al. Nonlinear errors of force-balanced micro accelerometer[J]. China Mechanical Engineering, 2009,20(15):1791-1793 (in Chinese)
[3]	Wan C X, Dong J X, Liu Y F, et al. Nonlinearity of a closed-loop micro-accelerometer[C]//Proceedings of the 16th IEEE International Conference on Control Applications, Singapore: IEEE, 2007:1260-1265
[4]	Puers R. MEMS capacitive sensor interfaces: can we solve the challenge?[C]//Proceedings of SENSOR 2009, 2009:287-292
[5]	Chavan A V, Wise K D. Batch-processed vacuum-sealed capacitive pressure sensors[J]. Journal of Microelectromechanical Systems, 2001,10(4):580-588
[6]	Lee J E Y, Seshia A A. Parasitic feedthrough cancellation techniques for enhanced electrical characterization of electrostatic microresonators[J]. Sensors and Actuators A: Physical, 2009,156(1):36-42
[7]	Lee J E Y, Seshia A A. Direct parameter extraction in feedthrough-embedded capacitive MEMS resonators[J]. Sensors and Actuators A: Physical, 2011,167(2):237-244
[8]	Wickramasinghe I P M, Maithripala D H S, Kawade B D, et al. Passivity-based stabilization of a 1-DOF electrostatic MEMS model with a parasitic capacitance[J]. IEEE Transactions on Control Systems Technology, 2009,17(1):249-256
[9]	Lehner G. Electromagnetic field theory for engineers and physicists[M]. Berlin: Springer Heidelberg, 2010
[10]	周吴,何晓平,苏伟,等.折叠梁刚度的误差灵敏度分析[J].机械设计,2010,27(2):80-83 Zhou W, He X P, Su W, et al. Error sensitivity analysis of folded beam stiffness[J]. Journal of Machine Design, 2010,27(2):80-83 (in Chinese)