元动作装配单元的故障维修决策

张根保; 杨兴勇; 李冬英; 李磊

doi:10.13433/j.cnki.1003-8728.2016.0512

元动作装配单元的故障维修决策

doi: 10.13433/j.cnki.1003-8728.2016.0512

1.
重庆大学机械工程学院, 重庆 400044

基金项目:

国家自然科学基金项目(51175527)与国家科技重大专项项目(2011ZX04003-031,2012ZX04011-031,2013ZX04005-012,2013ZX04012-012,2013ZX04012-031,2013ZX04012-061,2013ZX04012-041,2013ZX04011-013,2013ZX04012-051,2014ZX04001-031)资助

详细信息

作者简介:
张根保(1953-),教授,博士,博士生导师,研究方向为现代质量工程、先进制造技术等,gen.bao.zhang@263.net

计量
- 文章访问数: 222
- HTML全文浏览量: 42
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2014-05-21
- 刊出日期: 2016-05-05

Failure Maintenance Decision of Meta-action Assembly Unit

1.
School of Mechanical Engineering, Chongqing University, Chongqing 400044, China

摘要

摘要: 为快速确定故障部位,缩短维修时间,提出一种基于元动作装配单元的故障维修决策方法。首先,提出元动作装配单元的概念,并介绍其特点和划分原则,然后,采用模糊集理论和灰色关联理论将元动作装配单元故障进行风险性分析并排序,进而对各故障灰色关联度进行归一化处理并用主次图法确定关键故障,最后利用灰色聚类分析法对关键故障进行聚类分析,选择出元动作装配单元关键故障的合理维修方式。通过对某加工中心某元动作装配单元进行实例分析,证明了该方法的有效性。
- 元动作装配单元 /
- 故障维修决策 /
- 模糊集 /
- 灰色关联 /
- 灰色聚类
Abstract: A failure maintenance decision method based on the meta-action assembly unit was proposed to locate failures quickly and save the maintenance time. Firstly, the meta-action assembly unit was defined and its features and decomposition principles were elaborated. Secondly, the failure risk analysis and the sequencing of the meta-action assembly unit were accomplished by fuzzy sets theory and grey correlation theory. Then critical failures were determined by analyzing the grey correlation of failures through a normalization process and the primary and secondary diagram method. Finally, reasonable maintenance modes for critical failures of the meta-action assembly unit were confirmed by grey clustering approach. The effectiveness of the proposed failure maintenance decision method was demonstrated by an example of the meta-action assembly unit from a certain machining center.
- fuzzy sets /
- grey clustering /
- grey correlation /
- maintenance /
- meta-action assembly unit

HTML全文

参考文献(15)

[1]	Wang H Z. A survey of maintenance policies of deteriorating systems[J]. European Journal of Operational Research, 2002, 139(3):469-489
[2]	周新聪,刘东风,程海鹏,等.主动维修策略与油液分析技术[J].液压与气动,2004,(6):78-80 Zhou X C, Liu D F, Cheng H P, et al. Proactive maintenance strategy and oil analysis [J]. Chinese Hydraulics & Pneumatics, 2004,(6):78-80 (in Chinese)
[3]	李俭川.贝叶斯网络故障诊断与维修决策方法及应用研究[D].长沙:国防科学技术大学,2002 Li J C. A dissertation submitted to national university of defense technology for the degree of philosophy doctor in engineering[D]. Changsha: National University of Defense Technology, 2002 (in Chinese)
[4]	谢红侠.变压器维修决策的研究[D].徐州:中国矿业大学,2012 Xie H X. Study on maintenance decision in transformer[D]. Xuzhou: China University of Mining & Technology, 2012 (in Chinese)
[5]	Gupta A, Lawsirirat C. Strategically optimum maintenance of monitoring-enabled multi-component systems using continuous-time jump deterioration models[J]. Journal of Quality in Maintenance Engineering, 2006,12(3):306-329
[6]	黄静.船舶主推进系统的可靠性分析及维修决策的研究[D].镇江:江苏科技大学,2012 Huang J. The reliability analysis and maintenance decision research of the ships main propulsion system[D]. Zhenjiang: Jiangsu University of Science and Technology, 2012 (in Chinese)
[7]	崔建国,傅康毅,陈希成,等.基于灰色模糊与层次分析的多属性飞机维修决策方法[J].航空学报,2014,35(2):478-486 Cui J G, Fu K Y, Chen X C, et al. Multiple attribute maintenance decision making of aircraft based on grey-fuzziness and analytical hierarchy process[J]. Acta Aeronautica et Astronautica Sinica, 2014,35(2):478-486 (in Chinese)
[8]	Ambani S L, Ni J. Condition-based maintenance decision-making for multiple machine systems[J]. Journal of Manufacturing Science and Engineering, 2009,131(3):0310091-0310099
[9]	张恒.基于元动作的数控机床可靠性分析与控制技术研究[D].重庆:重庆大学,2012 Zhang H. Research of reliability analysis and control technology of CN machine based on element action[D]. Chongqing: Chongqing University, 2012 (in Chinese)
[10]	王绍印.故障模式和影响分析(FMEA)[M].广州:中山大学出版社,2003 Wang S Y. Failure mode and effect analysis (FMEA)[M]. Guangzhou: Sun Yat-Sen University Press, 2003 (in Chinese)
[11]	赵德孜.机械系统设计初期的可靠性模糊预计与分配[M].北京:国防工业出版社,2010 Zhao D Z. Fuzzy Prediction and allocation techniques for mechanical system reliability in early design stage[M]. Beijing: National Defense Industry Press, 2010 (in Chinese)
[12]	刘普寅,吴孟达.模糊理论及其应用[M].长沙:国防科技大学出版社,1998 Liu P Y, Wu M D. Fuzzy theory and its application[M]. Changsha: National University of Defense Technology press, 1998 (in Chinese)
[13]	刘思峰,郭天榜,党耀国,等.灰色系统理论及其应用[M].北京:科学出版社,1999 Liu S F, Guo T B, Dang Y G, et al. Grey system theory and its application[M]. Beijing: Science Press, 1999 (in Chinese)
[14]	陈殿生.数控机床可信性工程关键技术的研究[D].长春:吉林大学,2004 Chen D S. Key technology research of Computer Numerical Control machine tool reliability engineering[D]. Changchun: Jilin University, 2004 (in Chinese)
[15]	邓聚龙.灰色系统基本方法[M].武汉:华中科技大学出版社,2005 Deng J L. The primary methods of grey system theory[M]. Wuhan: Huazhong University of Science & Technology Press, 2005 (in Chinese)