两种新型铝锂合金铆接结构细节疲劳额定强度研究

陈安; 李珊山; 董登科; 许飞

doi:10.13433/j.cnki.1003-8728.2016.0329

两种新型铝锂合金铆接结构细节疲劳额定强度研究

doi: 10.13433/j.cnki.1003-8728.2016.0329

1.
中国飞机强度研究所, 西安 710065

详细信息

作者简介:
陈安(1986-),工程师,硕士,研究方向为结构疲劳、断裂及可靠性分析,andychen1986@163.com

计量
- 文章访问数: 183
- HTML全文浏览量: 30
- PDF下载量: 7
- 被引次数: 0
出版历程
- 收稿日期: 2014-04-22
- 刊出日期: 2016-03-05

Studying Detail Fatigue Rating of Two New Aluminum-lithium Alloy Riveted Structures

1.
Aircraft Strength Research Institute of China, Xi'an 710065, China

摘要

摘要: 针对飞机蒙皮铆接搭接结构,通过疲劳试验研究得到了两种新型铝锂合金Al-Li-S-4和2198-T8试件的细节疲劳额定值(DFR),同时借助扫描电镜观察疲劳裂纹的萌生和扩展行为。研究结果表明:Al-Li-S-4铆接结构的DFR值为102.24MPa,2198-T8的DFR值为83.09MPa,前者的铆接疲劳性能优于后者;两者疲劳断口有较大差异,前者断口比较平坦而后者相对粗糙,前者疲劳条纹更加细密,疲劳条带间距更小。
- 铆接搭接结构 /
- 铝锂合金 /
- 细节疲劳额定值 /
- 疲劳断口
Abstract: The detail fatigue rating (DFR) values of Al-Li-S-4 and 2524-T3 aluminum alloy structures are measured by fatigue experiments of riveted lap joints. The fatigue crack initiation and propagation behavior are observed by scanning electron microscopy. The results indicate that the DFR value of Al-Li-S-4 alloy is 102.24 MPa and the 2198-T8 alloy is 83.09 MPa, so the former has superior fatigue properties to the latter. There are some differences between Al-Li-S-4 and 2198-T8 on the fatigue fractography, and the former is flat and the latter is relatively rough, and the interval of fatigue striations of Al-Li-S-4 material is closer and finer.
- aluminum-lithium alloy /
- detail fatigue rating (DFR) /
- fatigue crack propagation /
- riveted lap joints

HTML全文

参考文献(9)

[1]	杨守杰,陆政,苏彬,等.铝锂合金研究进展[J].材料工程,2001,(5):44-47 Yang S J, Lu Z, Su B, et al. Development of aluminum-lithium alloys[J]. Journal of Materials Engineering, 2001,(5):44-47 (in Chinese)
[2]	邱惠中,吴志红.国外航天材料的新进展[J].宇航材料工艺,1997,(4):5-16 Qiu H Z, Wu Z H. Development of aerospace materials abroad[J]. Aerospace Materials & Technology, 1997,(4):5-16 (in Chinese)
[3]	Lequeu P. Advances in aerospace aluminum[J]. Advanced Mater & Processes, 2008,(2):47-49
[4]	王浩军,史春玲,贾志强,等.铝锂合金的发展及研究现状[J].热加工工艺,2012,41(14):82-85 Wang H J, Shi C L, Jia Z Q, et al. Development and current status of aluminum-lithium alloy[J]. Hot Working Technology, 2012,41(14):82-85 (in Chinese)
[5]	李风,陈海燕,张毅.铆钉搭接头疲劳强度曲线的研究[J].机械强度,2002,24(3): 453-454 Li F, Chen H Y, Zhang Y. Study on the Fatigue strength curves for riveted lap joints[J]. Journal of Mechanical Strength, 2002,24(3):453-454 (in Chinese)
[6]	关迪,孙秦.机身典型连接接头DFR值分析方法研究[J].机械强度,2012,34(1):131-136 Guan D, Sun Q. Study on analysis method for DFR of the typical lapped joint in airframe[J]. Journal of Mechanical Strength, 2012,34(1):131-136 (in Chinese)
[7]	Goranson U G. Fatigue issues in aircraft maintenance and repairs[J]. International Journal of Fatigue, 1998,20(6):413-431
[8]	郑晓玲,李令芳.民机结构耐久性与损伤容限设计手册(上册):疲劳设计与分析[M].北京:航空工业出版社,2003 Zheng X L, Li L F. Durability and damage tolerance design handbook on civil aviation aircraft structure(Ⅰ): fatigue design and analysis[M]. Beijing: Aviation Industry Press, 2003 (in Chinese)
[9]	林富甲.结构可靠性[M].西安:西北工业大学出版社,1991 Lin F J. Structural reliability analysis[M]. Xi'an: Northwestern Polytechnical University Press, 1991 (in Chinese)