θFXZ型测量机的回转轴线标定方法

谭文斌; 张起鹏; 李醒飞; 张晨阳

doi:10.13433/j.cnki.1003-8728.2016.0222

θFXZ型测量机的回转轴线标定方法

doi: 10.13433/j.cnki.1003-8728.2016.0222

1.
天津大学精密测试技术及仪器国家重点实验室, 天津 300072;
2.
天津商业大学机械工程学院, 天津 300131

基金项目:

国家自然科学基金项目(50975206)与精密测试技术及仪器国家重点实验室开放基金项目(PIL1407)资助

详细信息

作者简介:
谭文斌(1984-),讲师,博士后,研究方向为精密测试、自动控制,twb@tju.edu.cn

计量
- 文章访问数: 210
- HTML全文浏览量: 22
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2013-11-27
- 刊出日期: 2016-02-05

The Calibration Method of Rotary Axis for the θFXZ Measuring Machine

1.
State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin 300072, China;
2.
School of Mechanical Engineering, Tianjin University of Commerce, Tianjin 300131, China

摘要

摘要: 回转轴线的标定技术是保证θFXZ型测量机测量精度的一项关键技术。针对该型测量机没有y方向运动的特点,分析了其内外径测量原理,讨论了回转轴线标定误差与内外径测量误差的关系,并提出了一种基于环形标准件内孔、外圆的测量结果,快速标定回转轴线的方法。试验结果表明:利用该方法进行θFXZ型测量机的回转轴线标定,标定后,测量机对其它型号环形标准件的测量误差在±0.001 mm以内。该方法实现了对回转轴线的精确标定,同时操作简单,可以制定标定软件,实现回转轴线的软件自动标定。
- 坐标测量机 /
- 回转轴线 /
- 标定误差 /
- 测量误差
Abstract: θFXZ measuring machine. Considering that there is not motion in y direction for this type measuring machine, the measurement principles of inner and outer diameters have been analyzed. Moreover, the relationship between the calibration error of rotary axis and the measurement errors of inner and outer diameters has been discussed. Then a fast calibration method of rotation axis has been proposed, and it is based on the measurement results of inner hole and outer circle in the standard ring. The experimental results indicate that measurement errors of the other standard rings are in the range of ±0.001 mm after calibrating the rotary axis with the present technique. This aforementioned calibration technique is able to achieve the calibration accuracy of the rotary axis. Besides, it is easy to implement the software, and the computer software can be developed to fulfill automatic calibration of the rotary axis.
- calibration error /
- coordinate measuring machine /
- measurement errors /
- rotary axis

HTML全文

参考文献(15)

[1]	Zhang G X, Guo J B, Liu S G, et al. The development of cylindrical coordinate measuring machines[J]. Measurement Science and Technology, 2010,21(5):54003-54009
[2]	李杏华,洪燕.回转体测量机的双向法在线温度误差补偿[J].光电工程,2013,40(1):94-99 Li X H, Hong Y. The method of online thermal error compensation based on the bidirectional measurement of revolving body measuring machines[J]. Opto-Electronic Engineering, 2013,40(1):94-99(in Chinese)
[3]	赵则祥,路明,李学新,等.基于新一代几何产品技术规范的圆柱体直径的测量方法研究[J].中国机械工程,2006,17(11):1179-1182 Zhao Z X, Lu M, Li X X, et al. Measurement method of cylinder diameters based on new generation geometrical product specifications[J]. China Mechanical Engineering, 2006,17(11):1179-1828(in Chinese)
[4]	李杏华,张彦杰,刘硕.回转体测量机高精度标定技术研究[J].工具技术,2011,45(2):112-115 Li X H, Zhang Y J, Liu S. Research on high-precision calibration of revolving body measuring machine[J]. Tool Engineering, 2011,45(2):112-115(in Chinese)
[5]	庞学慧,张治民.高温弹体的精度综合测量系统[J].机械工程学报,2008,44(10):145-148 Pang X H, Zhang Z M. General measuring system for geometric parameters of shell body in high temperature[J]. Chinese Journal of Mechanical Engineering, 2008,44(10):145-148(in Chinese)
[6]	张国雄.三坐标测量机[M].天津:天津大学出版社,1999 Zhang G X. Coordinate measuring machines[M]. Tianjin:Tianjin University Press, 1999(in Chinese)
[7]	陈诚,裘祖荣,李醒飞,等.θFXZ型测量机力变形误差分析[J].天津大学学报,2010,43(1):64-70 Chen C, Qiu Z R, Li X F, et al. Analysis of force-induced errors of measuring machine with θFXZ structure[J]. Journal of Tianjin University, 2010,43(1):64-70(in Chinese)
[8]	朱嘉,李醒飞,谭文斌,等.基于激光干涉仪的测量机几何误差检定技术[J].机械工程学报,2010,46(10):25-30 Zhu J, Li X F, Tan W B, et al. Method of geometric error detection for measuring machine based on laser interferometer[J]. Journal of Mechanical Engineering, 2010,46(10):25-30(in Chinese)
[9]	郭俊杰,张琳,皮彪.坐标测量机的空间误差检测及21项几何误差分离的方法[J].中国机械工程,2002,13(13):1081-1084 Guo J J, Zhang L, Pi B. A method of spatial error detecting and 21 items geometrical error separating for CMM[J]. China Mechanical Engineering, 2002,13(13):1081-1084(in Chinese)
[10]	Hermann G. Geometric error correction in coordinate measurement[J]. Acta Polytechnica Hungarica, 2007,4(1):47-62
[11]	马修水.三坐标测量机动态误差源分析、建模与修正技术研究[D].合肥:合肥工业大学,2005 Ma X S. Research on dynamic error source analysis modeling and correction technical of coordinate measuring machines[D]. Hefei:Hefei University of Technology, 2005(in Chinese)
[12]	徐永安,杨钦,怀进鹏.转台中心轴线标定误差分析与修正[J].北京航空航天大学学报,2005,31(8):899-903 Xu Y A, Yang Q, Huai J P. Analysis and modification of turntable's axis calibration[J]. Journal of Beijing University of Aeronautics and Astronautics, 2005,31(8):899-903(in Chinese)
[13]	周会成,陈洁红,阳道善.一种新型三维视觉测头的结构与原理[J].电子测量与仪器学报,2000,14(2):21-25 Zhou H C, Chen J H, Yang D S. Structure and principle of a novel 3D laser probe[J]. Journal of Electronic Measurement and Instrument, 2000,14(2):21-25(in Chinese)
[14]	李想,李醒飞,朱嘉,等.θFXZ型回转体测量机回转轴线标定策略研究[J].机械科学与技术,2013,32(11):1591-1594 Li X, Li X F, Zhu J, et al. Study on the calibration strategy of the rotary axis for the measuring machine with the θFXZ structure[J]. Mechanical Science and Technology for Aerospace Engineering, 2013,32(11):1591-1594(in Chinese)
[15]	李醒飞,陈诚,谭文斌,等.双测头结构:中国,201120156007.4[P].2012-01-04 Li X F, Chen C, Tan W B, et al. Dual probe structure:China, 201120156007.4[P]. 2012-01-04(in Chinese)