平面2R含铰间隙机器臂末端位姿精度建模仿真分析

张发军; 李林子; 朱鑫; 蒲胤霖; 林辉; 田红亮

doi:10.13433/j.cnki.1003-8728.2016.0213

平面2R含铰间隙机器臂末端位姿精度建模仿真分析

doi: 10.13433/j.cnki.1003-8728.2016.0213

1.
三峡大学水电机械设备设计与维护湖北省重点实验室, 湖北宜昌 443002;
2.
三峡大学机械与动力学院, 湖北宜昌 443002

基金项目:

国家自然科学基金项目(51275273)资助

详细信息

作者简介:
张发军(1964-),教授,博士,硕士生导师,主要研究方向为机电模糊控制、精确施药及其相关理论的研究,doctorzyy@126.com

计量
- 文章访问数: 165
- HTML全文浏览量: 43
- PDF下载量: 7
- 被引次数: 0
出版历程
- 收稿日期: 2014-08-05
- 刊出日期: 2016-02-05

Modeling and Simulation for End-pose Accuracy of Planar 2R Manipulator with Joint Clearance

1.
Hubei Key Laboratory of Hydroelectric Machinery Design & Maintenance, China Three Gorges University, Hubei Yichang 443002, China;
2.
College of Mechanical & Power Engineering, China Three Gorges University, Hubei Yichang 443002, China

摘要

摘要: 由于多种不稳定因素对机器臂的影响,末端执行器往往会偏离理论作业位置,导致工作精度降低,其中机器臂铰接处存在的间隙对其运动影响很大。为了研究铰间隙对机器臂末端位姿的影响,采用D-H坐标系和位姿坐标变换法建立了机器臂逆运动学模型,用MATLAB获得广义坐标解析解,并由该广义坐标出发建立含间隙机器臂正运动学模型;采SolidWorks建立机器臂三维模型,分别对有、无铰间隙机器臂运动进行仿真及误差分析,得到机器臂作业时末端执行器的运动特性。结果表明,铰间隙对线性动态特性及角加速度有一定影响,特别是对线加速度和角加速度影响较大,使机器臂末端位姿存在偏差,降低了机器臂的运动稳定性与作业精度。
- 2R机器臂 /
- 铰间隙 /
- 位姿精度 /
- 误差分析 /
- 运动特性
Abstract: Various uncertain factors affect movement of manipulator, thus the end-effector tends to deviate from the theoretical position resulting in lower working accuracy, in which the joint clearance have an significant effect on the movement of manipulator. In order to study the influence of joint clearance to the pose accuracy of end-effector, the inverse kinematics mathematical model of the manipulator was established by D-H coordinate and coordinate transfer matrix method, getting the generalized coordinate equations with MATLAB, based on the present forward kinematics model; SolidWorks was used to establish the manipulator models and make error analysis and computer simulations of the manipulator with joint clearance and no joint clearance. At last, the movement characteristic of the end-effector is attained. The results and their analysis show preliminarily that the joint clearance has a certain effect on the linear motion characteristic and the angular acceleration, especially the linear acceleration and angular acceleration, which makes the pose of end-effector deviation, and reduces the motion stability and operation accuracy.
- 2R manipulator /
- error analysis /
- joint clearance /
- motion characteristics /
- pose accuracy

HTML全文

参考文献(16)

[1]	时兵,金烨.面向虚拟样机的机构间隙旋转铰建模与动力学仿真[J].机械工程学报, 2009, 45(4):299-303 Shi B, Jin Y. Dynamic simulation and modeling of revolute clearance joint for virtual prototyping[J]. Journal of Mechanical Engineering, 2009,45(4):299-303(in Chinese)
[2]	白争锋.考虑铰间间隙的机构动力学特性研究[D].哈尔滨:哈尔滨工业大学,2011 Bai Z F. Research on dynamic characteristics of mechanism with joint clearance[D]. Harbin:Harbin Institute Harbin Institute of Technology, 2011(in Chinese)
[3]	尉立肖,刘才山.圆柱铰间隙运动学分析及动力学仿真[J].北京大学学报(自然科学版),2005,(5):679-687 Yu L X, Liu C S. Dynamic simulation and kinetic description of revolute joint with spatial clearance[J]. Acta Scientiarum Naturalium Universitatis Pekinensis, 2005,(5):679-687(in Chinese)
[4]	杨东超,刘莉,徐凯,等.拟人机器人运动学分析[J].机械工程学报,2003,(9):70-74 Yang D Ch, Liu L, Xu K, et al. Kinematics analysis of humanoid robot[J]. Journal of Mechanical Engineering, 2003,(9):70-74(in Chinese)
[5]	韩兴,李昌,于晓光,等.基于ADAMS/View明弧焊接机器人运动仿真分析[J].焊接学报,2013,(4):69-72 Han X, Li Ch, Yu X G, et al. Motion simulation of open-arc welding robot based on ADAMS/View[J]. Transactions of the China Welding Institution, 2013,(4):69-72(in Chinese)
[6]	赵波,戴旭东,张执南,等.柔性多体系统中间隙铰接副的磨损预测[J].摩擦学学报,2013,(6):638-644 Zhao B, Dai X D, Zhang Z N, et al. Prediction of wear in revolute clearance joints in flexible multibody systems[J]. Tribology, 2013,(6):638-644(in Chinese)
[7]	Erkaya S, Doğan S, Ulus S,aban. Effects of joint clearance on the dynamics of a partly compliant mechanism:numerical and experimental studies[J]. Mechanism and Machine Theory, 2015,88:125-140
[8]	陈鹿民,阎绍泽,金德闻,等.含间隙铰空间可展桁架结构的动力学实验[J].清华大学学报(自然科学版),2003,(8):1027-1030 Chen L M, Yan S Z, Jin D W, et al. Dynamic experiment of a space deployable truss structure with joint clearances[J]. Journal of Tsinghua University (Science and Technology), 2003,(8):1027-1030(in Chinese)
[9]	Flores P, Ambrosio J. Revolute joints with clearance in multibody systems[J]. Computers & Structures, 2004,82:1359-1369
[10]	Zhang X C, Zhang X M, Chen Z. Dynamic analysis of a 3-RRR parallel mechanism with multiple clearance joints[J]. Mechanism and Machine Theory, 2014,78:105-115
[11]	洪嘉振,蒋丽忠.柔性多体系统刚-柔耦合动力学[J].力学进展,2000,30(1):15-20 Hong J Z, Jiang L Z. Flexible multibody dynamics with coupled rigid and deformation motions[J]. Advances in Mechanics, 2000,30(1):15-20(in Chinese)
[12]	田强,张云清,陈立平,等.柔性多体系统动力学绝对节点坐标方法研究进展[J].力学进展,2010,40(2):189-202 Tian Q, Zhang Y Q, Chen L P, et al. Advances in the absolute nodal coordinate method for the flexible multibody dynamics[J]. Advances in Mechanics, 2010,40(2):189-202(in Chinese)
[13]	马强,陈志,张小超,等.基于ADAMS的果树采摘机械臂的运动仿真分析[J].农机化研究,2013,(5):37-40 Ma Q, Chen Z, Zhang X C, et al. Motion simulation analysis of harvesting robot arm based on ADAMS[J]. Journal of Agricultural Mechanization Research, 2013,(5):37-40(in Chinese)
[14]	李雪琴,蒋红海,殷国富,等.多关节焊接机器人轨迹误差补偿解耦分析[J].焊接学报,2013,34(10) Li X Q, Jiang H H, Yin G F, et al. Research on decoupling of trajectory error compensation for multi-joint welding robot[J]. Transactions of the China Welding Institution, 2013,34(10) (in Chinese)
[15]	孙志礼,杨强,闫明,等. 3-RPS并联机器人运动可靠性仿真研究[J].机械科学与技术,2007,26(6):780-783 Sun Z L, Yang Q, Yan M, et al. Motion reliability simulation of the 3-RPS parallel robot[J]. Mechanical Science and Technology, 2007,26(6):780-783(in Chinese)
[16]	王玉,王旗华,赵建光,等.焊接机器人虚拟样机轨迹模拟和运动仿真分析[J].焊接学报,2012,33(4):109-112 Wang Y, Wang Q H, Zhao J G, et al. Research on welding robot trajectory and motion simulation based on virtual prototype technology[J]. Transactions of the China Welding Institution, 2012,33(4):109-112(in Chinese)