旋转盘附近加热表面的射流冲击传热研究

刘波; 张靖周; 谭晓茗

doi:10.13433/j.cnki.1003-8728.2015.1114

旋转盘附近加热表面的射流冲击传热研究

doi: 10.13433/j.cnki.1003-8728.2015.1114

1.
南京航空航天大学能源与动力学院, 南京 210016

基金项目:

国家自然科学基金项目(51076063)资助

详细信息

作者简介:
刘波(1990-),硕士研究生,研究方向为强化传热,nuaaliubo@163.com

通讯作者:
张靖周,教授,博士,zhangjz@nuaa.edu.cn

计量
- 文章访问数: 132
- HTML全文浏览量: 16
- PDF下载量: 6
- 被引次数: 0
出版历程
- 收稿日期: 2013-02-04
- 刊出日期: 2015-11-05

Investigation on Jet Impinging Heat Transfer on Heated Surface in Vicinity of a Rotating Disk

1.
College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

摘要

摘要: 采用数值计算方法模拟磨削工件表面的射流冲击对流换热过程,对不同旋转速度和旋转方向下,旋转盘诱导的气旋运动和射流冲击的耦合作用进行了研究分析。在转盘诱导的气旋流动影响下,冲击射流向转盘和加热表面之间区域的侵入能力受到抑制,但气旋流动与射流冲击的耦合作用均使得加热表面的对流换热能力相对圆盘静止时得到增强;盘缘在射流冲击喷嘴附近的切向速度与射流冲击方向协调时,旋转盘诱导的气旋运动和射流冲击的耦合作用有利于改善磨削弧区的对流换热,随着转盘旋转速度的增加,其强化对流换热的效果更显著。
- 冲击射流 /
- 旋转盘 /
- 流场 /
- 传热 /
- 数值分析
Abstract: Numerical analysis was performed to study the flow fields and heat transfer characteristics on a heated plate under the interaction of cyclone flow near rotating disk and jet impinging by simulating the grinding process. The effects of rotating speed and direction on convective heat transfer were analyzed. The results and their analysis show preliminarily that: 1) the penetration capacity of impinging jet into the contact area between rotational disk and heated surface is suppressed under the cyclone flow induced by the rotating disk, but the interaction of cyclone flow and jet impingement is beneficial for the enhancement of convective heat transfer compared to static disk case; 2) when the jet impinging direction is consistent with the rotating direction of rotating disk, the interaction of cyclone flow and jet impinging is beneficial for the enhancement of convective heat transfer near grinding region, especially at higher rotating speed.
- boundary conditions /
- calculations /
- computer simulation /
- data acquisition /
- design of experiments

HTML全文

参考文献(19)

[1]	Shimizu J, Zhou L B, Eda H. Simulation and experimental analysis of super high-speed grinding of ductile material[J]. Journal of Materials Processing Technology,2002,129(1-3):19-24
[2]	Mayer J E Jr, Purushothaman G, Gopalakrishnan S. Model of grinding thermal damage for precision gear materials[J]. CIRP Annals-Manufacturing Technology,1999,48(1):251-254
[3]	周里群.圆环内圆磨削的热变形误差研究[J].机械科学与技术,2003,22(3):423-426 Zhou L Q. Study on thermal deformation error of internal grinding for circular ring[J]. Mechanical Science and Technology,2003,22(3):423-426 (in Chinese)
[4]	Kaminski J, Alvelid B. Temperature reduction in the cutting zone in water-jet assisted turning[J]. Journal of Materials Processing Technology,2000,106(1-3):68-73
[5]	徐鸿钧,傅玉灿,孙方宏,等.高效磨削时弧区热作用机理与强化弧区换热的基础研究[J].中国科学(E辑),2002,32(3):296-307 Xu H J, Fu Y C, Sun F H, et al. Fundamental studies on enhancing heat transfer in contact zone during high efficiency grinding[J]. Science in China Series E: Technological Sciences,2002,45(3):261-272 (in Chinese)
[6]	Dumitrescu M, Elbestawi M A, Wardany T I. Mist coolant applications in high speed machining of advanced materials[M]. Dudzinski D, Molinari A, Schulz H. Metal Cutting and High Speed Machining. New York: Springer,2002:329-339
[7]	Liu J Y, Han R D, Sun Y F. Research on experiments and action mechanism with water vapor as coolant and lubricant in green cutting[J]. International Journal of Machine Tools and Manufacture,2005,45(6):687-694
[8]	An Q L, Fu Y C, Xu J H. The application of cryogenic pneumatic mist jet impinging in high-speed milling of Ti-6Al-4V[J]. Key Engineering Materials,2006,315-316:244-248
[9]	Li Y K, Zhang J Z, Tan X M. 3-D Numerical computation of jet array impingement with initial crossflow[J]. Transactions of Nanjing University of Aeronautics & Astronautics,2004,21(2):128-133
[10]	张靖周,李永康,谭晓茗,等.阵列射流冲击冷却局部对流换热特性的数值计算与实验研究[J].航空学报,2004,25(4):339-342 Zhang J Z, Li Y K, Tan X M, et al. Numerical computation and experimental investigation on local convective heat transfer characteristics for jet array impingement[J]. Acta Aeronautica et Astronautica Sinica,2004,25(4):339-342 (in Chinese)
[11]	张泽远,张靖周,杨卫华.半封闭通道射流冲击换热特性的实验[J].航空动力学报,2006,21(4):626-630 Zhang Z Y, Zhang J Z, Yang W H. Convective heat transfer of jet impingement inside semi-confined channel[J]. Journal of Aerospace Power,2006,21(4):626-630 (in Chinese)
[12]	Graham K M, Ramadhyani S. Experimental and theoretical studies of mist jet impingement cooling[J]. Journal of Heat Transfer,1996,118(2):343-349
[13]	Li X, Gaddis J L, Wang T. Mist/steam cooling by a row of impinging jets[J]. International Journal of Heat and Mass Transfer,2003,46(12):2279-229
[14]	芦秋敏,雷数业.雾化喷射冷却的机理及模型研究[J].工程热物理学报,2005,26(5):817-819 Lu Q M, Lei S Y. Study on mechanisms and model of heat transfer in spray cooling[J]. Journal of Engineering Thermophysics,2005,26(5):817-819 (in Chinese)
[15]	姜澎,黄洪雁,冯国泰,等.水雾/蒸汽相变冲击冷却的数值模拟[J].哈尔滨工程大学学报,2009,30(10):1098-1101 Jiang P, Huang H Y, Feng G T, et al. Numerically simulating mist/steam impingement cooling with phase change[J]. Journal of Harbin Engineering University,2009,30(10):1098-1101 (in Chinese)
[16]	Lallave J C, Rahman M M, Kumar A. Numerical analysis of heat transfer on a rotating disk surface under confined liquid jet impingement[J]. International Journal of Heat and Fluid Flow,2007,28(4):720-734
[17]	O'Donovan T S, Murray D B, Torrance A A. Jet heat transfer in the vicinity of a rotating grinding wheel[J] Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,2006,220(6):837-845
[18]	Ebbrell S, Woolley N H, Tridimas Y D, et al. The effects of cutting fluid application methods on the grinding process[J]. International Journal of Machine Tools and Manufacture,2000,40(2):209-223
[19]	Holman J P. Heat Transfer[M]. 9th ed. New York: McGraw-Hill Book Company,2002