反射面天线结构的多工况机电耦合优化

尉飞

doi:10.13433/j.cnki.1003-8728.2015.0932

反射面天线结构的多工况机电耦合优化

doi: 10.13433/j.cnki.1003-8728.2015.0932

尉飞

1.
中国电子科技集团公司第五十四研究所, 石家庄 050081

详细信息

作者简介:
尉飞（1983-），工程师，博士，研究方向为天线结构的仿真与优化，weifei1983@gmail.com

计量
- 文章访问数: 184
- HTML全文浏览量: 34
- PDF下载量: 6
- 被引次数: 0
出版历程
- 收稿日期: 2014-04-04
- 刊出日期: 2015-09-05

Mechatronic Optimization Design of Reflector Antennas under Multiple Load Conditions

Wei Fei

1.
The 54th Research Institute of China Electronics Technology Group Corporation, Shijiazhuang 050081, China

摘要

摘要: 根据反射面天线结构的设计特点和工作特性，在传统多工况离散变量优化设计的基础上，通过引入天线增益损失，建立了以天线质量或增益为优化目标、结构加权应变能为约束的机电耦合优化模型。通过对某反射面天线结构的结构优化，将本文方法与传统优化方法进行了对比分析。数值结果表明：采用传统优化方法即使增加天线结构刚度也未必能提高天线的电性能。而通过耦合优化设计，在容许的设计范围内，既能保证天线的电性能指标，又能满足结构的刚度要求。
- 多工况 /
- 机电耦合 /
- 反射面天线 /
- 结构优化
Abstract: According to the characteristics of reflector antenna design and its working conditions, a new discrete variable optimization model under multiple load conditions is developed. In the model, the gain of antenna is introduced to consider the relationship between electrical performance and deformation of antenna structures. In this model, the antenna weight or gain is adopted as the objective functions and the weighted compliance is used as the constraints. The proposed method is applied to the structural optimization design of a reflector antenna. The results show that traditional optimization methods can improve the stiffness of antenna structure, but can not increase their electrical performance. While in the allowed limitations, both the requirements for the electrical performance and structural stiffness of antenna structure can be satisfied with the proposed coupling optimization design.
- electromechanical coupling /
- multiple load conditions /
- reflector antenna /
- structural optimization

HTML全文

参考文献(10)

[1]	钱宏亮,刘岩,范峰,等.65 m天线结构主反射面面形精度分析[J].红外与激光工程,2012,41(11):3027-3033 Qian H L, Liu Y, Fan F, et al. Surface precision analysis on main reflector of 65 m antenna structure[J]. Infrared and Laser Engineering, 2012,41(11):3027-3033 (in Chinese)
[2]	周超,杨洪波,吴小霞,等.1.2 m望远镜风载作用分析[J].红外与激光工程,2011,40(5):889-893 Zhou C, Yang H B, Wu X X, et al. Influence of wind loading on the 1.2 m telescope[J]. Infrared and Laser Engineering, 2011,40(5):889-893 (in Chinese)
[3]	王伟,段宝岩,马伯渊.重力作用下天线反射面变形及其调整角度的确定[J].电波科学学报,2008,23(4):645-650 Wang W, Duan B Y, Ma B Y. Gravity deformation and best rigging angle for surface adjustment of large reflector antennas[J]. Chinese Journal of Radio Science, 2008,23(4):645-650 (in Chinese)
[4]	张巨勇,施浒立,陈志平,等.大口径天线电性能风振响应的时域分析[J].应用力学学报,2008,25(1):84-88 Zhang J Y, Shi H L, Chen Z P, et al. Time domain wind buffeting response of large diameter antenna electric performances[J]. Chinese Journal of Applied Mechanics, 2008,25(1):84-88 (in Chinese)
[5]	李孝全,王莉.反射面型天线结构多工况离散变量优化设计[J].宇航学报,2001,22(2):56-60 Li X Q, Wang L. Reflective antenna structure's discrete variables optimum design under multiple loading conditions[J]. Journal of Astronautics, 2001,22(2):56-60 (in Chinese)
[6]	王从思,段宝岩,郑飞,等.大型空间桁架面天线的结构电磁耦合优化设计[J].电子学报,2008,36(9):1776-1781 Wang C S, Duan B Y, Zheng F, et al. Mechatronic optimization design and analysis of large space parabolic antennas with active truss support structures[J]. Acta Electronica Sinica, 2008,36(9):1776-1781 (in Chinese)
[7]	Wang C S, Duan B Y, Qiu Y Y. On distorted surface analysis and multidisciplinary structural optimization of large reflector antennas[J]. International Journal of Structural and Multidisciplinary Optimization, 2007,33(6):519-528
[8]	叶尚辉,李在贵.天线结构设计[M].西安:西安电子科技大学出版社,1988 Ye S H, Li Z G. Design of antenna structures[M]. Xi'an: Xidian University Press, 1988 (in Chinese)
[9]	Ruze J. Antenna tolerance theory-A review[J]. Proceedings of the IEEE, 1966,54(4):633-640
[10]	张胜兰,郑冬黎,郝琪,等.基于HyperWorks的结构优化设计技术[M].北京:机械工业出版社,2007 Zhang S L, Zheng D L, Hao Q, et al. Structural optimization based on HyperWorks[M]. Beijing: China Machine Press, 2007 (in Chinese)