Research on Measuring Method of Monolithic Impeller with Dividing Apparatus Via CMM
-
摘要: 利用三坐标测量机测量整体叶轮,需要分度装置来满足各个叶片的测量。由于各种误差特别是安装误差的影响,会引起整体叶轮中心轴与分度装置的中心轴不重合从而产生运动偏心,使得测头无法顺利接触叶片并影响整体叶轮叶片型面的检测精度。提出两种测量策略:分次独立坐标系测量法和统一坐标系测量法。前者在每次分度后都重新建立坐标系,减少分度过程中造成的误差;后者只建立一次坐标系,通过计算叶轮中心与分度装置中心间的偏心来进行误差补偿。Abstract: To measure the monolithic impeller on coordinate measuring machine(CMM), the dividing apparatus is needed for sampling individual blades. The installation eccentricity between the monolithic impeller and the dividing apparatus will cause eccentric motion, which affects the contact between the measuring head and the blades. Even worse, it reduces the detection accuracy of blade surface. Two measurement strategies are proposed, namely independent coordinate measurement and unified coordinate measurement. The former re-establishes the coordinate system after each dividing operation to lower the eccentricity-induced error. The latter establishes coordinate system only once, while achieves error compensation with calculating the eccentricity between the monolithic impeller and the dividing apparatus.
-
[1] 康敏,徐家文.用三坐标测量机检测整体叶轮叶片型面误差[J].工具技术,2002,36(8):55-57 Kang M, Xu J W. Measurement of profile error of monolithic impeller's blade by using CMM [J]. Tool Engineering, 2002,36(8):55-57 (in Chinese) [2] 张国雄.三坐标测量机[M].天津:天津大学出版社,1999 Zhang G X. Coordinate measuring machine[M]. Tianjin:Tianjin University Press,1999 (in Chinese) [3] Chang H C, Lin A C. Automatic inspection of turbine blades using a 3-axis CMM together with a 2-axis dividing head[J]. The International Journal of Advanced Manufacturing Technology, 2005,26(7-8):789-796 [4] Chang H C, Lin A C. Five-axis automated measurement by coordinate measuring machine[J]. The International Journal of Advanced Manufacturing Technology, 2011,55(5-8):657-673 [5] Heo E Y, Kim D W, Lee J Y, et al. Computer-aided measurement plan for an impeller on a coordinate measurement machine with a rotating and tilting probe[J]. Robotics and Computer-Integrated Manufacturing, 2008,24(6):788-795 [6] 蔺小军,李宜明,李政辉,等.整体叶盘叶片型面CMM测量路径规划技术[J].航空制造技术,2012,(11):50-52 Lin X J, Li Y M, Li Z H, et al. CMM Measurement path planning technology for blade surface of Blisk[J]. Aeronautical Manufacturing Technology, 2012,(11):50-52 (in Chinese) [7] Hsu T H, Lai J Y, Ueng W D. On the development of airfoil section inspection and analysis technique[J]. The International Journal of Advanced Manufacturing Technology, 2006,30(1-2):129-140 [8] 艾玲,王亮.三坐标测量叶片型面半径补偿技术的应用与分析[J].计量技术,2002,(12):22-24 Ai L, Wang L. Application and analysis of blade surface radius compensation technology on CMM [J]. Measurement Technique, 2002,(12):22-24 (in Chinese) [9] 李春,刘书桂.三坐标测量机的测头半径补偿与曲面匹配[J].仪器仪表学报,2003,24(4):145-147 Li C, Liu S G. The probe radius compensation of free-form sureface and surface matching[J]. Chinese Journal of Scientific Instrument, 2003,24(4):145-147 (in Chinese) [10] 刘晶.叶片数字化检测中的模型配准技术及应用研究[D].西安:西北工业大学,2006 Liu J. Research on model registration method and its application in digital measurement [D]. Xi'an: Northwestern Polytechnical University, 2006 (in Chinese) [11] 蔺小军,单晨伟,王增强,等.航空发动机叶片型面三坐标测量机测量技术[J].计算机集成制造系统,2012,18(1):125-131 Lin X J, Shan C W, Wang Z Q, et al. Measurement techniques of coordinate measuring machine for blade surface of aero-engine[J]. Computer Integrated Manufacturing Systems, 2012,18(1):125-131 (in Chinese) [12] 单光坤,李文龙,郑鹏,等.大型齿轮在机测量中安装偏心的测定及补偿[J].机械传动,2003,27(2):48-50 Shan G K, Li W L, Zhen P, et al. Measurement and compensation of eccentricity in the on machine inspection of large gears[J]. Journal of Mechanical Transmission, 2003,27(2):48-50 (in Chinese) [13] 徐永安,杨钦,怀进鹏.转台中心轴线标定误差分析与修正[J].北京航空航天大学学报,2005,31(8):899-903 Xu Y G, Yang Q, Huai J P. Analysis and modification of turntable's axis calibration[J]. Journal of Beijing University of Aeronautics and Astronautics, 2005,31(8):899-903 (in Chinese) [14] 郭敬滨,张大厦,张继承.大齿轮齿形测量中补偿安装偏心的理论分析[J].天津大学学报,2012,45(5):435-439 Guo J B, Zhang D S, Zhang J C. Compensation Theory analysis of installation eccentricity in measurement of large gear tooth [J]. Journal of Tianjin University, 2012,45(5):435-439 (in Chinese) [15] 吴一凡.基于UG二次开发的整体叶轮测量规划与仿真[D].南京:南京航空航天大学,2011 Wu Y F. Measuring simulation and planning for the integral impeller based on UG secondary development[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2011 (in Chinese)
点击查看大图
计量
- 文章访问数: 170
- HTML全文浏览量: 22
- PDF下载量: 6
- 被引次数: 0