Space Error Interpolation Algorithm Research for Complex Shape Workpieces Machining
-
摘要: 提出了基于形状函数插值方法预测机床工作空间内任一切削点的空间误差方法,对有限元插值法和无网格法插值两种不同方法进行了分析。在比较两种优缺点的基础上,针对复杂型体工件的加工,提出了有限元插值和最小二乘法无网格插值耦合计算方法对机床工作切削点空间误差进行插值预测的方法。仿真和实际切削试验都证明了插值算法的有效性。
-
关键词:
- 误差补偿模型 /
- 复杂型体工件 /
- 有限元插值 /
- 最小二乘无网格法插值
Abstract: A forecasting method for any point space errors in machine tool working region is presented based on the shape function interpolation. Two different methods, finite element method interpolation and meshless method interpolation, have been analyzed. Based on the comparison between the advantages and disadvantages of the above two methods, a space error forecasting method by coupling finite element interpolation and a moving least squares meshless method interpolation for complexity shape was presented. -
[1] Tan K K, Huang S N, Lee T H. Geometrical error compensation and control of an XY table using neural network [J]. Control Engineering Practice, 2006,14:59-69 [2] Lei C, Yong L. A novel error compensation implementing strategy and realizing on Siemens 840DCNC system[J]. International Journal of Advanced Manufacturing Technology, 2012,61:595-608 [3] Zhang Y, Yang J G, Zhang K. Geometric error measurement and compensation for the rotary table of five axis machine tool with double ballbar[J]. International Journal of Advanced Manufacturing Technology, 2013,65(1-4):275-281 [4] 王秀山,杨建国,余永吕,等.双转台五轴数控机床热误差建模、检测及补偿实验研究[J].中国机械工程,2009,20(4):405-408 Wang X S, Yang J G, Yu Y C, et al. Research on thermal modeling, measurement and compensation for the two turntable 5-axis NC machine tools[J]. Journal of Chinese Mechanical Engineer, 2009,20(4):405-408 (in Chinese) [5] 张虎,周云飞,唐小琦,等.数控加工中心误差G代码补偿技术[J].华中科技大学学报,2002,30(2):13-16 Zhang H, Zhou Y F, Tang X Q, et al. Soft compensation technique of volumetric errors of CNC machine centers by modifying G codes[J]. Journal of Huazhong University of Science and Technology, 2002,30(2):13-16 (in Chinese) [6] Fan G, Yang J G. Orthogonal polynomials based thermally induced spindle and geometric error modeling and compensation[J]. International Journal Advanced Manufacture Technology, 2013,65:1791-1800 [7] 王助成,邵敏.有限元法基本原理和数值方法[M].北京:清华大学出版社,1997 Wang Z C, Shao M. The basic principle of finite element method and numerical method[M]. Beijing: Tsinghua University Press, 1997 (in Chinese) [8] 戴保东,程玉民.基于径向基函数的局部边界积分方程方法[J].机械工程学报,2006,42(11):150-155 Dai B D, Cheng Y M. Local boundary integral equation method based on radial basis functions[J]. Chinese Journal of Mechanical Engineering, 2006,42(11):150-155 (in Chinese) [9] 程荣军.无网格方法的误差估计和收敛性研究[D].上海:上海大学,2007 Cheng R J. Meshless method of error estimate and convergence study[D]. Shanghai:Shanghai University, 2007 (in Chinese) [10] 程玉民,彭妙娟,李九红.复变量移动最小二乘法及其应用[J].力学学报,2005, 37(6):719-723 Cheng Y M, Peng M J, Li J H. The complex variable moving least-square approximation and its application[J]. Chinese Journal of Theoretical and Applied Mechanics, 2005,37(6):719-723 (in Chinese) [11] Singh I V, Sandeep K. The element free galerkin method in three dimensional steady heat conduction[J]. International Journal of Computational Engineering Science, 2002,(3):291-303 [12] 张淡,王建国,张丙印.径向基点插值无网格法与有限元耦合法[J].清华大学学报,2008,(6):951-954 Zhang Y, Wang J G, Zhang B Y. Coupled FEM and meshless radial point interpolation method[J]. Journal of Tsinghua Univsity, 2008,(6):951-954 (in Chinese) [13] 贾亮,黄其青,殷之平.无网格-有限元直接耦合法[J].西北工业大学学报,2002, 25(3):337-341 Jia L, Huang Q Q, Yin Z P. A new and better EFGM-EM direct coupling method[J]. Journal of Northwestern Polytechnical University, 2002,25(3):337-341 (in Chinese) [14] 郭小虎,秦洪.适用于可变形体建模与模拟的无网格方法研究[J].中国科学F辑,2009,39(1):47-60 Guo X H, Qin H. Meshless method study Suitable for variable on the modeling and simulation[J]. Chinese Science F, 2009,39(1):47-60 (in Chinese) [15] 赵敏,陈文.基于径向基函数的加权最小二乘无网格法[J].计算力学学报,2011,(1):66-71 Zhao M, Cheng W. A meshless weighted least square method based on radial basic functions[J]. Chinese Journal of Computational Mechanics, 2011,(1):66-71 (in Chinese)
点击查看大图
计量
- 文章访问数: 134
- HTML全文浏览量: 25
- PDF下载量: 8
- 被引次数: 0