高速卷绕机锭轴夹头动态特性测试方法研究

易玮帆; 侯曦; 赵敬安; 王生泽

doi:10.13433/j.cnki.1003-8728.2015.0717

高速卷绕机锭轴夹头动态特性测试方法研究

doi: 10.13433/j.cnki.1003-8728.2015.0717

易玮帆¹,
侯曦¹,
赵敬安¹,
王生泽^1,2, ,

1.
东华大学机械工程学院, 上海 201620;
2.
纺织装备教育部工程研究中心, 上海 201620

基金项目:

上海市科委项目（08111100703）资助

详细信息

作者简介:
易玮帆（1989-），硕士研究生，研究方向为转子系统的动态测试与仿真，yiweifan250@163.com

通讯作者:
王生泽，教授，博士生导师，wasz@dhu.edu.cn

计量
- 文章访问数: 139
- HTML全文浏览量: 26
- PDF下载量: 9
- 被引次数: 0
出版历程
- 收稿日期: 2013-10-10
- 刊出日期: 2015-07-05

Research on Dynamic Testing Method of High-speed Winder Spindle

1.
College of Mechanical Engineering, Donghua University, Shanghai 201620, China;
2.
Engineering Research Center of the Textile Equipment of Ministry of Education, Shanghai 201620, China

摘要

摘要: 为解决高速卷绕机锭轴夹头筒管位移难以实测的难题，根据高速卷绕机锭轴夹头的结构和工况，提出了一种利用新型激光传感器测量锭轴夹头筒管振动位移的方法。结果表明：该方法的测量数据精确、可靠，可有效防止高频特性的丢失。采用此方法实地测试了高速卷绕机空管时锭轴夹头的稳态响应，验证了此方法用于高速卷绕机锭轴夹头动态特性测试的可行性。
- 高速卷绕机锭轴夹头 /
- 动态测试 /
- 激光传感器 /
- 振动位移
Abstract: In order to obtain the dynamic response of the spindle, a new displacement testing method using a new laser sensor is presented in this paper based on the equipment structure and the working condition. The new method is used to test the steady response of the high-speed winder spindle without filament yarn. The test results show that this new testing method is accurate and reliable for the dynamic response testing of the high-speed winder spindle without filament yarn.
- dynamic response /
- dynamic testing /
- dynamics /
- edd currents

HTML全文

参考文献(7)

[1]	马晓健,束永平,苏振,等.卷绕机振动特性与测试分析[J].机械工程师,2010,(9):37-38 Mao X J, Shu Y P, Su Z, et al. A test and analysis of winding machine[J]. Mechanical Engineer,2010,(9):37-38 (in Chinese)
[2]	李素敏.高速卷绕头筒管夹头的研制[J].纺织机械,2008,(3):50-52 Li S M. Develop of high speed winder spindle[J]. Textile Machinery,2008,(3):50-52 (in Chinese)
[3]	侯曦,张凯,杨崇倡,等.高速卷绕机筒管夹头系统动力学建模与临界转速分析[J].机械设计与制造,2012,(7):239-241 Hou X, Zhang K, Yang C C, et al. Dynamic modeling and critical speed analysis of the spindle of the high speed winder[J]. Machinery Design & Manufacture,2012,(7):239-241 (in Chinese)
[4]	侯曦,张凯,刘娜娜,等.筒管夹头参数慢变转子系统不平衡动态响应仿真分析[J].机械科学与技术,2012,31(10):1628-1633 Hou X, Zhang K, Liu N N, et al. Dynamic response simulation of a rotor system with slow-time varying parameters of the high speed winder spindle with unbalance masses[J]. Mechanical Science and Technology for Aerospace Engineering,2012,31(10):1628-1633 (in Chinese)
[5]	孟超群,杨崇倡,刘娜娜.高速卷绕机筒管夹头的仿真分析[J].合成纤维工业,2012,35(2):57-60 Meng C Q, Yang C C, Liu N N. Simulation analysis of bobbin chuck of high-speed winder[J]. China Synthetic Fiber Industry,2012,35(2):57-60 (in Chinese)
[6]	Katsumi H, Junichi U, Takeshi H. Vibration analysis of high-speed spindle in yarn winder[J]. Journal of the Textile Machinery,2000,53(5):65-72
[7]	国家CIMS工程技术研究中心.高速卷绕头产品的仿真与性能分析[J].清华大学学报,2007,(3):56-58 National CIMS Engineering Research Center. Simulation and function analysis of high speed winder spindle[J]. Journal of Tsinghua University,2007,(3):56-58 (in Chinese)