基于有限元的柔性铰链微位移机构研究

刘庆纲; 陈良泽; 梁君; 刘美欧; 孙庚; 徐临燕

doi:10.13433/j.cnki.1003-8728.2015.0701

基于有限元的柔性铰链微位移机构研究

doi: 10.13433/j.cnki.1003-8728.2015.0701

1.
天津大学精密测试技术及仪器国家重点实验室, 天津 300072

基金项目:

教育部博士点基金项目（20120032110059）、天津市科技型中小企业技术创新资金项目（13ZXCXGX56800）及天津市应用基础及前沿技术研究计划项目（13JCQNJC04700）资助

详细信息

作者简介:
刘庆纲（1964-），教授，博士生导师，研究方向为微纳与光电检测技术，lqg@tju.edu.cn

计量
- 文章访问数: 130
- HTML全文浏览量: 31
- PDF下载量: 10
- 被引次数: 0
出版历程
- 收稿日期: 2013-10-29
- 刊出日期: 2015-07-05

Exploring Flexible Hinge Micro-displacement Magnification Mechanism Using Finite Element Method

1.
State Key Laboratory of Precision Measuring Technology and Instrument, Tianjin University, Tianjin 300072, China

摘要

摘要: 针对传统压电陶瓷器件应用于微位移技术中难以实现高精度的问题，提出了一种柔性铰链微位移机构，对该机构的运动特性进行了理论分析，并利用有限元方法进行了仿真验证。研究了铰链间距及其关键几何参数对微位移机构性能的影响。结果表明：有限元仿真结果和理论分析结果相一致，利用ANSYS仿真可以确定几何参数对微位移机构性能的影响，结合理论分析可以提高微位移机构的设计效率和准确性，避免纯粹理论计算在结构设计上缺少仿真分析支撑的问题。实验结果验证了本文设计的微位移机构应用于超精密加工中具有很高的精度。
- 微位移机构 /
- 柔性铰链 /
- 有限元法 /
- 位移放大比
Abstract: Aiming at enhance the positioning accuracy of a traditional piezoelectric ceramic device in a micro-displacement system, we propose the flexible hinge micro-displacement magnification mechanism. The motion characteristics of the mechanism is analyzed and simulated with the finite element method (FEM). The influence of the distance between two hinges and their key parameters are discussed. The analysis results show that the FEM simulation results agree well with the theoretical analysis results. The FEM simulation results can be used to determine the effect of the geometric parameters of the flexible hinge on the performance of the micro-displacement mechanism and can enhance the efficiency and accuracy of micro-displacement mechanism design. With the micro-displacement mechanism, the lack of simulation analysis support is avoided in carrying out structural design. The simulation results show that the micro-displacement mechanism we designed has a high precision in super-precision processing.
- computer simulation /
- design /
- displacement magnification ratio /
- efficiency

HTML全文

参考文献(10)

[1]	刘德忠,许意华,费仁元,等.柔性铰链放大器的设计与加工技术[J].北京工业大学学报,2001,27(2):161-163 Liu D Z, Xu Y H, Fei R Y, et al. Design and manufacture of the amplifier based on flexible joint[J]. Journal of Beijing Polytechnic University,2001,27(2):161-163 (in Chinese)
[2]	林洁琼,王磊,李迎春,等.基于有限元的柔性铰链微位移放大机构设计[J].机床与液压,2009,37(10):21-23 Lin J Q, Wang L, Li Y C, et al. Design for micro-displacement magnification mechanism of flexible hinge based on finite element method[J]. Machine Tool and Hydraulics,2009,37(10):21-23 (in Chinese)
[3]	李仁军,漆小敏,刘莉.微位移放大机构的分析与计算[J].机械设计与研究,2012,28(4):46-48 Li R J, Qi X M, Liu L. Analysis and design of micro-displacement amplifier[J]. Machine Design and Research,2012,28(4):46-48 (in Chinese)
[4]	孙中雷,赵美英,尹子栋.超磁致伸缩驱动器微位移放大机构设计与研究[J].机械科学与技术,2012,31(7) Sun Z L, Zhao M Y, Yin Z D. Designing micro-displacement amplifier for giant magnetostrictive actuator[J]. Mechanical Science and Technology for Aerospace Engineering,2012,31(7) (in Chinese)
[5]	Jouaneh M, Yang R. Modeling of flexure-hinge type lever mechanisms[J]. Precision Engineering,2003,27:407-418
[6]	Kim J H, Kim S H, Kwak Y K. Development of a piezo-electric actuator using a three-dimensional bridge-type hinge mechanism[J]. Review of Scientific Instruments,2003,74:933-956
[7]	杨洁.应变型微小位移_载荷力检测单元的设计分析与试验研究[D].长春:吉林大学,2012 Yang J. Design and experimental research of a strain-type micro displacement and load measurement unit[D]. Changchun: Jilin University,2012 (in Chinese)
[8]	Paros J M, Weisbord L. How to design flexure hinges[J]. Machine Design,1965,37(11):151-156
[9]	吴鹰飞,周兆英.柔性铰链的设计计算[J].工程力学,2002,19(6):136-14 Wu Y F, Zhou Z Y. Design of flexure hinges[J]. Engineering Mechanics,2002,19(6):136-14 (in Chinese)
[10]	张强,卢泽生.基于有限元分析的纳米级微进给工作台的设计[J].航空精密制造技术,2005,41(1):6-9 Zhang Q, Lu Z S. Design of nano-positioner stage based on finite element analysis[J]. Aviation Precision Manufacturing Technology,2005,41(1):6-9 (in Chinese)