A Control Strategy for Transverse Flux Machine Direct Drive Servo Press
-
摘要: 为实现伺服压力机的柔性加工控制,在分析曲柄肘杆伺服压力机驱动系统的基础上,提出采用Bezier曲线数学模型的伺服压力机系统控制策略,并给出具体控制方案。给出了应用电枢电流有效值和初相进行控制的横向磁场驱动电机控制策略,建立了电机的伺服控制系统,对曲柄的运转进行精确的控制,最终将Bezier曲线数学模型计算得到的柔性加工给定曲线在滑块上实现。冲裁工艺柔性加工的模拟运行控制结果表明:控制系统能够获得满足加工工艺要求的精确滑块运行曲线。
-
关键词:
- 伺服压力机 /
- 柔性加工 /
- Bezier曲线数学模型 /
- 横向磁场电机
Abstract: In order to realize the flexible processing control of a servo press, the paper analyzes the drive system of a crank toggle servo press, proposes the servo press control strategy with the Bezier mathematical model, and gives the specific control scheme. Then it further proposes the transverse flux machine control strategy with the armature current RMS control and phase control and establishes the servo motor control system to precisely control the crank operation. Eventually the slider can be controlled with the flexible processing curves calculated by the Bezier mathematical model. The results on the simulation of punching process control show that the control system can achieve the precision slide operation curve, which is in agreement with processing requirements.-
Key words:
- angular velocity /
- calculations /
- control strategy /
- controllers
-
[1] 金风明,窦志平,韩新民.伺服压力机在我国的发展现状[J].机电产品开发与创新,2012,25(1):19-21 Jin F M, Dou Z P, Han X M. Overview of servo-press development in China[J]. Development & Innovation of Machinery & Electrical Products,2012,25(1):19-21 (in Chinese) [2] 赵升吨,王军,何予鹏,等.机械压力机节能型气压式制动方式设计理论[J].机械工程学报,2007,43(9):16-20 Zhao S D, Wang J, He Y P, et al. Design theory of an energy-saving pneumatic power brake mode for mechanical press[J]. Journal of Mechanical Engineering,2007,43(9):16-20 (in Chinese) [3] 乃舜峰,章争荣,孙友松,等.伺服压力机三角肘杆传动机构的优化设计[J].现代制造工程,2014,(3):1-4 Nai S F, Zhang Z R, Sun Y S, et al. Optimization design of triangle toggle rod construction for servo press[J]. Modern Manufacturing Engineering,2014,(3):1-4 (in Chinese) [4] 渠聚鑫,夏琴香,龙晓斌,等.伺服压力机主传动及其控制技术的研究进展[J].锻压技术,2014,39(10):89-97 Qu J X, Xia Q X, Long X B, et al. Research development on the main drive system and control technologies of servo press[J]. Forging & Stamping Technology,2014,39(10):89-97 (in Chinese) [5] 姚菁琳,张新国,吴书森,等.基于有限元的大吨位压力机立柱结构改进[J].锻压装备与制造技术,2013,(6):54-57 Yao J L, Zhang X G, Wu S S, et al. Improvement of column structure for large-tonnage press based on finite element method[J]. China Metal Forging Equipment & Manufacturing Technology,2013,(6):54-57 (in Chinese) [6] 谢嘉,赵升吨,沙郑辉.用于机械压力机驱动的电动机发展趋势探讨[J].锻压装备与制造技术,2009,(6):13-17 Xie J, Zhao S D, Sha Z H. Study on development of motor in drive system of mechanical press[J]. China Metal Forging Equipment & Manufacturing Technology,2009,(6):13-17 (in Chinese) [7] Weh H, May H. Achievable force densities for permanent magnet exited machines in a new configuration[C]// Proceedings of International Conference on Electrical Machines: Munchen, Germany, March,1986:1107-1111 [8] Chen A Y, Nilssen R, Nysveen A. Performance comparisons among radial-flux, multistage axial-flux, and three-phase transverse-flux PM machines for downhole applications[J]. IEEE Transactions on Industry Applications,2010,46 (2):779-789 [9] Ahn H T, Jang G H, Chang J H, et al. Reduction of the torque ripple and magnetic force of a rotatory two-phase transverse flux machine using herringbone teeth[J]. IEEE Transactions on Magnetics,2008,44(11):4066-4069 [10] Hoang T K, Kang D H, Lee J Y. Comparisons between various designs of transverse flux linear motor in terms of thrust force and normal force[J]. IEEE Transactions on Magnetics,2010,46(10):3795-3801 [11] Hong D K, Woo B C, Chang J H, et al. Optimum design of TFLM with constraints for weight reduction using characteristic function[J]. IEEE Transactions on Magnetics,2007,43(4):1613-1616 [12] Lei G, Guo Y G, Zhu J G, et al. System level six sigma robust optimization of a drive system with PM transverse flux machine[J]. IEEE Transactions on Magnetics,2012,48(2):923-926 [13] Kang D H. Increasing of thrust force in transverse flux machine by permanent-magnet screen[J]. IEEE Transactions on Magnetics,2005,41(5):1952-1955 [14] Chang J H, Kang D H, Lee J Y, et al. Development of transverse flux linear motor with permanent-magnet excitation for direct drive applications[J]. IEEE Transactions on Magnetics,2005,41(5):1936-1939 [15] Xie J, Kang D H, Woo B C, et al. Optimum design of transverse flux machine for high contribution of permanent magnet to torque using response surface methodology[J]. Journal of Electrical Engineering and Technology,2012,7(5):745-752 [16] 尚万峰,赵升吨.伺服压力机加工工艺的Bezier模型及其优化研究[J].西安交通大学学报,2012,46(3):31-35 Shang W F, Zhao S D. Servo press processing bezier-model with optimum[J]. Journal of Xi'an Jiaotong University,2012,46(3):31-35 (in Chinese)
点击查看大图
计量
- 文章访问数: 320
- HTML全文浏览量: 36
- PDF下载量: 7
- 被引次数: 0