Dynamic Analysis of School Bus Fitted with Roll Resistant Specific Hydraulically Interconnected Suspension System
-
摘要: 基于牛顿第二定律和传递矩阵法,建立装有抗侧翻液压互联悬架校车全车模型的机液耦合系统动力学方程。完成该非线性系统特征值辨识及模态分析,并对比分析校车安装液压互联悬架前后的动态特性。分析了阻尼阀参数对校车主要模态动态特性关系的影响,结合整车模态匹配策略及阻尼特性需求,提出基于搜索法的阻尼阀参数设计方法,并通过校车动态特性分析验证了该方法的有效性。分析结果表明,抗侧翻液压互联悬架可显著提高车辆的抗侧翻性能,通过合理设计阻尼阀参数可极大改善该耦合系统的阻尼特性。
-
关键词:
- 液压互联悬架(HIS) /
- 机液耦合 /
- 模态分析 /
- 阻尼特性 /
- 抗侧翻
Abstract: Based on the transfer matrix method and Newton's second law, this paper derives the hydraulic-mechanical coupled multi-body dynamic equation of model of a school bus fitted with roll resistant specific hydraulic interconnected suspension system. After finishing eigenvalue identification and modal analysis, a comparsion on dynamic characteristics between vehicles which is installed or uninstalled the hydraulic interconnected suspension is produced. To research the coordination of dominant contribution modes of vehicle, the principle of the damping valves is discussed. Based on the modal matching strategy and the requirement for damping characteristic, a design method of damping valves is proposed and proved availably. The study results indicate that the roll resistant specific hydraulic interconnected suspension system can promote the capacity of anti-rollover specific observably and with reasonable comfort performance, the damping characteristics of the coupled system could be optimized. -
[1] Cao D, Rakheja S, Su C Y. Pitch attitude control and braking performance analysis of heavy vehicle with interconnected suspensions[R]. SAE Technical Paper,2007 [2] Zhang N, Smith W A, Jeyakumaran J. Hydraulically interconnected vehicle suspension: background and modelling[J]. Vehicle System Dynamics,2010,48(1):17-40 [3] Wade S, Nong Z. High frequency parameter sensitivity in HIS [C]//Australasian Congress on Applied Mechanics, 10-12 December 2007,Brisbane,Australia [4] Smith W A, Zhang N. Recent developments in passive interconnected vehicle suspension[J]. Frontiers of Mechanical Engineering in China,2010,5(1):1-18 [5] 丁飞,张农,韩旭.安装液压互联悬架货车的机械液压多体系统建模及模态分析[J].机械工程学报,2012,48(6):116-123 Ding F, Zhang N, Han X. Modeling and modal analysis of multi-body truck system fitted with hydraulically interconnected suspension[J]. Journal of Mechanical Engineering,2012,48(6):116-123 (in Chinese) [6] 杨波,陈思忠,王勋,等.双气室油气悬架特性研究[J].机械工程学报,2009,45(5):276-280 Yang B, Chen S Z, Wang X. Research of twin-accumulator hydro-pneumatic suspension [J]. Journal of Mechanical Engineering,2009,45(5):276-280 (in Chinese) [7] Guzzomi F G, O'Neill P L, Tavner A C R. Investigation of damper valve dynamics using parametric numerical methods[C]//16th Australasian Fluid Mechanics Conference (AFMC). School of Engineering,The University of Queensland,2007:1123-1130 [8] Lau K K, Edge K A, Johnston D N. Impedance characteristics of hydraulic orifices[J]. Proceedings of the Institution of Mechanical Engineers, Part I:Journal of Systems and Control Engineering,1995,209(4):241-253 [9] Edge K A, Johnston D N. The impedance characteristics of fluid power components: relief valves and accumulators[J]. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 1991,205(1):11-22 [10] Edge K A, Johnston D N. The impedance characteristics of fluid power components: relief valves and accumulators[J]. Proceedings of the Institution of Mechanical Engineers,Part I:Journal of Systems and Control Engineering,1991,205(1):11-22 [11] Milliken W F, Milliken D L, Olley M. Chassis design:principles and analysis[M]. Society of Automotive Engineers. Inc, USA,2002 [12] 周长城.汽车平顺性与悬架系统设计[M].北京:机械工业出版社,2011:79-85 Zhou C C. Ride comfort and suspension design [M]. Beijing:China Machinical Press,2011:79-85 (in Chinese)
点击查看大图
计量
- 文章访问数: 88
- HTML全文浏览量: 27
- PDF下载量: 9
- 被引次数: 0