The Measurement Method of Pendulum Length for Tool Axis Pendulum Type Machining Center
-
摘要: 五坐标加工中心的主轴摆长是实现五坐标机床自动跟踪的关键参数,其确定值的精度直接影响加工中心的加工精度。提出一种主轴摆动式五坐标加工中心摆长的测定方法,其原理是机床坐标值的实际变动量应与通过摆长、主轴摆动角度之间几何关系计算出的坐标值变动量相符。与传统测量方法进行了比较,证明所提方法精度高于传统方法,并且实用、可靠。Abstract: The pendulum length is a key parameter which achieves automatic tracking about 5-axis machining center. The processing precision of machining center is directly influenced by the pendulum length. A method for measuring the pendulum length about tool axis pendulum type machining center is presented, in which the principle is that actual variations of machine coordinate values should be consistent with the calculated variations according to the geometric relations between pendulum length and swing angle of tool axis. Compared with the traditional method, example demonstrates that the present precision is higher than the traditional. In addition, the method is proved to be reliable and practical.
-
[1] 周奎,曾祥录,陶华.工作台回转与刀轴摆动五轴联动数控加工编程技术研究[J].制造技术与机床,2009,(12):95-98 Zhou K, Zeng X L, Tao H. Programming for 5 - axis machine with swivel tool axis integrated rotary table [J]. Manufacturing Technology & Machine Tool,2009,(12):95-98 (in Chinese) [2] 田荣鑫,任军学,史耀耀,等.附加转台数控机床的五坐标后置处理算法研究[J].制造技术与机床,2007,(6): 36-38 Tian R X, Ren J X, Shi Y Y, et al. Research on five axis post-processor for cnc machine with additional table [J]. Manufacturing Technology & Machine Tool,2007,(6):36-38 (in Chinese) [3] 高琦.航发叶片加工用五轴联动机床的发展[J].航空制造技术,2008,(25):78-80 Gao Q. Development of aero-engine blades machining using five-axis simultaneous machine tool [J]. Aeronautical Manufacturing Technology,2008,(25):78-80 (in Chinese) [4] 周济,周艳红.数控加工技术[M].北京:国防工业出版社,2002 Zhou J, Zhou Y H. CNC machining technology [M]. Beijing:Defense Industry Press,2002 (in Chinese) [5] 郑相周,傅国栋,黄思,等.车床主轴回转精度测量系统的研制[J].机械,2011,(9):78-80 Zhen X Z, Fu G D, Huang S, et al. Development of spindle error measurement system [J]. Machinery,2011,(9):78-80 (in Chinese) [6] 何七荣,慕斌.机床主轴回转运动误差对加工精度的影响[J].中国修船,2007,(1):37-37 He Q R, Mu B. Impact on the precision of motion errors spindle rotation [J]. China Ship Repair,2007,(1):37-37 (in Chinese) [7] 苏恒,李自军,魏元烈.机床主轴运动的在线高精度测量[J].现代制造工程,2002,(3):46-47 Su H, Li Z J, Wei Y L. Spindle motion error measurement on machine with high precision [J]. Machinery Manufacturing Engineer,2002,(3):46-47 (in Chinese) [8] 姚俊,王平.主轴回转精度测量方法[J].制造技术与机床,2011,(12):176-180 Yao J, Wang P. Measurement methods of spindle's rotation accuracy [J]. Manufacturing Technology & Machine Tool,2011,(12):176-180 (in Chinese) [9] 王颖,魏领会,丁宁.数控机床精度的检测与补偿实验[J].机械工程师,2013,(3):50-51 Wang Y, Wei L H, Din N. Accuracy measurement and compensation experiment of NC machine [J]. Mechanical Engineer,2013,(3)50-51 (in Chinese) [10] 周艳红,周济,周云飞,等.五坐标数控加工的理论误差分析与控制[J].机械工程学报,1999,(5):54-57 Zhou Y H, Zhou J, Zhou Y F, et al, Theoretical error analysis and control of five-axis NC machining [J]. Journal of Mechanical Engineering,1999,(5):54-57 (in Chinese) [11] 彭万彬,周忆,黄修涛,等.基于软件同步的机床主轴回转进度测试 [J].机械科学与技术,2008,(7):923-926 Peng W B, Zhou Y, Huang X T, et al. Measurement of spindle rotation resolution using software synchronous technique [J]. Mechanical Science and Technology for Aerospace Engineering,2008,(7):923-926 (in Chinese) [12] 杨永生.机床定位误差测量及补偿[J].自动化应用,2011,(3):51-55 Yang Y S. Error measurement and compensation of machine location [J]. Automation Application,2011,(3):51-55 (in Chinese) [13] 王哲,赵爱国,赵德云,等.数控机床定位精度的综合分析[J].机械设计与制造,2010,(9):132-133 Wang Z, Zhao D Y, Xu D Y. Comprehensive analysis of the positioning precision of CNC [J]. Machinery Design & Manufacture,2010,(9):132-133 (in Chinese) [14] 李翠芝,姜增辉.SINMERK840D的定位精度补偿[J].机械工程师,2005,(9):27-28 Li C Z, Jiang Z H. SINMERK840D positioning accuracy compensation [J]. Mechanical Engineer,2005,(9):27-28 (in Chinese) [15] 栗时平.多轴数控机床精度建模与误差补偿方法研究[D].长沙:国防科学技术大学,2002,10 Li S P. Research on modeling and error compensation method precision multi-axis CNC machine tools [D]. Changsha:University of Defense Technology,2002,10 (in Chinese) [16] 王建平.复杂型面微小零件加工及机床精度分析[D].长沙:国防科学技术大学,2002 Wang J P. Complex surface machining small parts and machine precision analysis [D]. Changsha:University of Defense Technology,2002 (in Chinese) [17] 花国梁.精密测量技术[M].北京:清华大学出版社,1986 Hua G L. Precision measurement technology [M]. Beijing:Tsinghua University Press,1986 (in Chinese)
点击查看大图
计量
- 文章访问数: 327
- HTML全文浏览量: 28
- PDF下载量: 14
- 被引次数: 0