编织-嵌槽型金属橡胶制备工艺及试验研究

李拓; 白鸿柏; 路纯红

doi:10.13433/j.cnki.1003-8728.2015.0331

编织-嵌槽型金属橡胶制备工艺及试验研究

doi: 10.13433/j.cnki.1003-8728.2015.0331

1.
军械工程学院, 石家庄 050003

详细信息

作者简介:
李拓（1988-），博士研究生，研究方向为金属橡胶、机械振动与冲击防护，lt0229@126.com

通讯作者:
白鸿柏，教授，博士，BHB11@sina.com

计量
- 文章访问数: 95
- HTML全文浏览量: 20
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2013-06-06
- 刊出日期: 2015-03-05

Study on Preparation Technology and Tests of Knitted-dapped Metal Rubber

1.
Ordnance Engineering College, Shijiazhuang 050003

摘要

摘要: 介绍了编织-嵌槽型金属橡胶的工艺方法。通过压缩试验，对比了编织-嵌槽型金属橡胶与普通金属橡胶的静态特性，研究了密度和厚度对编织-嵌槽型金属橡胶压缩性能的影响。结果表明：工艺参数相同时，编织-嵌槽型金属橡胶在承载能力、隔振频带以及性能的一致性等方面均优于普通金属橡胶；增大密度会使编织-嵌槽型金属橡胶的刚度升高，并使其线性阶段缩短；厚度对材料线性阶段的刚度和范围影响不大，而厚度的增加会降低材料在硬化阶段的刚度。
- 编织-嵌槽型金属橡胶 /
- 制备工艺 /
- 压缩试验
Abstract: The fabrication technology of knitted-dapped metal rubber was introduced. The comparison of the static characteristic of knitted-dapped metal rubber with the ordinary one was made by carrying out the compression tests. The effect of the thickness and density on the compression deformation of knitted-dapped metal rubber was also studied. The results showed that knitted-dapped metal rubber was better than the ordinary metal rubber in many aspects, such as bearing capacity, range of vibration isolation and consistency of property. The stiffness of the knitted-dapped metal rubber increased and the linear range decreased with the increasing of density. The thickness hardly had any influence on the material's stiffness and the linear range, while the stiffness in the hardening stage would decreased with the increasing of thickness.
- compression test /
- deformation /
- design of experiments

HTML全文

参考文献(10)

[1]	切戈达耶夫.金属橡胶构件的设计[M].李中郢,译.北京:国防工业出版,2000 Chegodayev. Design of metal rubber component[M]. Li Z Y, translated. Beijing:National Defense Industry Press,2000 (in Chinese)
[2]	Mark Zarzour, John Vance. Experimental evaluation of a metal mesh bearing damper[J]. Journal of Engineering for Gas Turbines and Power,2000,(122):326-329
[3]	Ertas B H. Nonlinear dynamic characterization of oil-free wire mesh dampers[J]. Journal of Engineering for Gas Turbines and Power,2008,(130):032503-1-032503-8
[4]	Ertas B H. Compliant hybrid journal bearing using integral wire mesh dampers[J]. Journal of Engineering for Gas Turbines and Power,2009,(131):022503-1-022503-11
[5]	杜金名,耿峰.金属橡胶材料在导弹武器系统中的应用研究[J].飞航导弹,2004(8):56-59 Du J M, Geng F. Application research for metal rubber in missile weapon systems[J]. Winged Missiles Journal,2004,(8):56-59 (in Chinese)
[6]	敖宏瑞,姜洪源,王树国,等.支承发动机管路的金属橡胶阻尼器隔振性[J].机械设计,2003,20(2):14-17 Ao H R, Jiang H Y, Wang S G, et al. Reasearch on vibration isolation function of metal & rubber damper for supporting engine pipe line[J]. Journal of Machine Design,2003,20(2):14-17 (in Chinese)
[7]	赵程,张军,张恒.大丝径金属橡胶稀土硼碳氮共渗[J].金属热处理,2009,34(2):89-91 Zhao C, Zhang J, Zhang H. RE-B-C-N multi-element penetration of 65Mn steel metal rubber with larger wire diameter[J]. Heat Treatment of Metals,2009,34(2):89-91 (in Chinese)
[8]	郝慧荣,白鸿柏,张慧杰.非圆截面丝金属橡胶与普通金属橡胶阻尼性能的比较[J].机械科学与技术,2009,(28):210-213 Hao H R, Bai H B, Zhang H J. Comparison of damping capacities between non-circular section wire metal rubber and ordinary metal rubber[J]. Mechanical Science and Technology for Aerospace Engineering,2009,(28):210-213 (in Chinese)
[9]	洪杰,朱彬,马艳红,等.金属橡胶颗粒静态特性试验[J].北京航空航天大学学报,2012,38(2):218-221 Hong J, Zhu B, Ma Y H, et al. Experiments on static characteristics of metal rubber particles[J]. Journal of Beijing University of Aeronautics and Astronautics,2012,38(2):218-221 (in Chinese)
[10]	王尤颜,白鸿柏,刘远方.金属橡胶材料压缩性能的细观特征研究[J].机械科学与技术,2011,30(3):404~407 Wang Y Y, Bai H B, Liu Y F. Micro characteristic study of the compressive performance of metal rubber material[J]. Mechanical Science and Technology,2011,30(3):404-407 (in Chinese)