初始缺陷对平纹编织C/SiC复合材料热膨胀系数的影响

姚磊江; 王梦; 陈刘定; 童小燕

doi:10.13433/j.cnki.1003-8728.2015.0232

初始缺陷对平纹编织C/SiC复合材料热膨胀系数的影响

doi: 10.13433/j.cnki.1003-8728.2015.0232

1.
西北工业大学无人机特种技术重点实验室, 西安 710065;
2.
西北工业大学航空学院, 西安 710072

基金项目:

国家自然科学基金项目（11072195）资助

详细信息

作者简介:
姚磊江（1973-），博士，研究员，研究方向为复合材料结构完整性，复合材料结构的可维修技术，yaolj@nwpu.edu.cn

计量
- 文章访问数: 210
- HTML全文浏览量: 30
- PDF下载量: 12
- 被引次数: 0
出版历程
- 收稿日期: 2013-06-07
- 刊出日期: 2015-02-05

Effect of the Initial Defects on the Thermal Expansion Coefficients of Plain Weave C/SiC Composite

1.
Laboratory of Science and Technology on UAV, Northwestern Polytechnical University, Xi'an 710065;
2.
School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072

摘要

摘要: 基于有限元细观计算力学（FECM）提出了一种获得平纹编织C/SiC复合材料的初始缺陷对其热膨胀系数影响关系的方法。首先通过扫描电镜（SEM）观察将初始缺陷进行分类并利用SEM图对各类初始缺陷的分布特征进行测量和统计，然后依据测量和统计结果建立含初始缺陷的宏观材料代表体积单元（RVE）和纤维束RVE有限元模型，最后采用FECM方法预测含各类初始缺陷宏观材料RVE的热膨胀系数。基于以上方法得到了各类初始缺陷与宏观材料热膨胀系数之间的定量映射关系。
- C/SiC复合材料 /
- 初始缺陷 /
- 热膨胀系数 /
- 有限元细观计算力学 /
- 扫描电镜
Abstract: An approach to obtain the effect of the initial defects on the thermal expansion coefficients of plain weave C/SiC composite was proposed based on the finite element computational micromechanics (FECM). Firstly, the initial defects were classified by using SEM observations and furthermore the measurements and statistics were carried out according to the SEM images. Then, the entire composite and fiber bundle representative volume element(RVE)models with initial defects were established according to the above-mentioned results. Finally, the thermal expansion coefficients of entire composite RVE models with initial defects were predicted by using the FECM method. The quantitative mapping relationships between all kinds of initial defects and the thermal expansion coefficients of entire composite were obtained based on the above-mentioned method.
- C/SiC composite /
- composite materials /
- defects /
- finite element computational micromechanics(FECM) /
- finite element method

HTML全文

参考文献(9)

[1]	李开元,徐永东,张立同,等.纤维编织结构对碳纤维增强碳化硅复合材料热膨胀和热扩散系数的影响[J].硅酸盐学报,2008,36(11):1564-1569 Li K Y, Xu Y D, Zhang L T, et al. Effects of fabric architectures on the thermal expansion coefficient and the thermal diffusivity of carbon fiber reinforced silicon carbide composites[J]. Journal of the Chinese Ceramic Society,2008,36(11):1564-1569 (in Chinese)
[2]	王培吉,范素华.纤维复合材料的热膨胀系数[J].复合材料学报,2002,19(3):124-126 Wang P J, Fan S H. Thermal expansion coefficient of fiber composites[J]. Acta Materiae Compositae Sinica,2002,19(3):124-126 (in Chinese)
[3]	张青,成来飞,张立同,等.高温处理对3D C/ SiC复合材料热膨胀性能的影响[J].复合材料学报,2004,21(4):124-128 Zhang Q, Cheng L F, Zhang L T, et al. Effects of heat treatment on thermal expansion of 3D C/SiC composites[J]. Acta Materiae Compositae Sinica,2004,21(4):124-128 (in Chinese)
[4]	Ganesh V K, Naik N K. Thermal expansion of plain weave fabric laminates[J]. Composites Science and Technology,1994,51(3):387- 408
[5]	Naik N K, Ganesh V K. Prediction of on-axes elastic properties of plain weave fabric composites[J]. Composites Science and Technology,992,45(2):135- 152
[6]	聂荣华,矫桂琼,王波.二维编织C/SiC复合材料的热膨胀系数预测[J].复合材料学报,2008,25(2):109-114 Nie R H, Jiao G H, Wang B. Prediction on coeff icient of thermal expansion for 2- D braided C/SiC composites[J]. Acta Materiae Compositae Sinica,2008,25(2):109-114 (in Chinese)
[7]	李自山.平纹编织C/SiC复合材料热物理性能的数值模拟[D].西安:西北工业大学,2011 Li Z S. The numerical simulation of the thermal physical properties of plain weave C/SiC composites[D]. Xi'an:Northwestern Polytechnical University,2011 (in Chinese)
[8]	Chen L D, Tong X Y, Yao L J, et al. Microstructure modeling and further effective property prediction for plain weave C/SiC composites considering manufacturing process[J]. Advanced Science Letters,2011,4(4-5):1444-1449
[9]	Sun C T, Vaidya R S. Prediction of composite properties from a representative volume element[J]. Composites Science and Technology,1996,56(2):171-179