An Approach to Extract the Product Shape Features by Using Variant Design of Curves and Surfaces
-
摘要: 在变形设计理论的基础上,提出了将产品主体形态分解为子形态。研究了基于超椭圆方程和三次带参均匀B样条曲线构造技术提取影响产品艺术风格子形态横截面造型特征的方法,并结合曲面构造变形技术实现产品形态体特征的提取。以电动手工具为例研究了产品形态体特征提取与形态优化设计效果,得出超椭圆方程提取算法参数少,可较好地提取对称图形、非倒角图形的造型特征;基于三次带参均匀B样条曲线构造技术的算法参数较多,可较好地提取多种图形。Abstract: Based on the variant design theory, a new method by using super elliptic equations and cubic uniform B-spline construction technology to extract the sub-form's cross-sectional shape features was presented. Combining with the variant design of curved surfaces, the effects of extraction and shape optimization design were proved by an electric hand tool design case. The results were showed in the contrast research that the super elliptic extraction algorithm has less parameters, which is simple and can better extract the symmetric figure and chamfering graphics features. The cubic uniform B-spline algorithm has more parameters. Although it is a little complicated, it can be better used in extracting a variety of graphics and has wide adaptation.
-
Key words:
- algorithms /
- cubic uniform B-spline /
- design /
- feature extraction /
- fuzzysets
-
[1] Mugge P, Schoormans J P L, Schifferstein H N J. Incorporating consumers in the design of their own products, the dimensions of product personalization[J]. Co Design,2009,5(2):79-97 [2] 苏建宁,李鹤岐.基于感性意象的产品造型设计方法研究[J].机械工程学报,2004,40(4):164-197 Su J N, Li H Q, Method of product form design based on perceptual image[J]. China Mechanical Engineering,2004,40(4):164-197 (in Chinese) [3] 胡伟峰,赵江洪,赵丹华.基于造型特征线的汽车造型意象研究[J].中国机械工程,2009,20(4):497-499 Hu W F, Zhao J H, Zhao D H. Study on styling image of vehicle based on form feature lines[J]. China Mechanical Engineering,2009,20(4):497-499 (in Chinese) [4] 黄琦,孙守迁,陆亮,等.基于特征匹配的产品风格认知方法[J].中国机械工程, 2003,14 (21):1836-1839 Huang Q, Sun S Q, Lu L, et al. Product style recognition based on feature matching[J]. China Mechanical Engineering,2003,14(21):1836-1839 (in Chinese) [5] 高尚鹏,徐家川,基于模糊层次分析法车身A 级曲面评价[J].机械科学与技术2012,31(3):388-391 Gao S P, Xu J C. The evaluation for class a surfaces of auto body based on FAHP[J]. Mechanical Science and Technology for Aerospace Engineering,2012,31(3):388-391 (in Chinese) [6] 郭磊,吉晓民,胡钢,等.基于四次带参Bézier曲线的汽车前脸造型设计[J].机械科学与技术,2013,32(9):1327-1331 Guo L, Ji X M, Hu G, et al. Automobile face design based on quartic béziercurves with shape parameters[J]. Mechanical Science and Technology for Aerospace engineering,2013,32(9):1327-1331 (in Chinese) [7] Tang C Y, Fung K Y, Lee E W M. Product form design using customer perception evaluation by a combined superellipse fitting and ann approach[J]. Advanced Engineering Informatics,2013,27(3):386-394 [8] 高瞩,吉晓民.基于形态原型的产品形态创新设计方法[J].机械科学与技术,2010,29(8):1072-1075 Gao Z, Ji X M. A method for innovation design of product form based on form prototype[J]. Mechanical Science and Technology for Aerospace Engineering,2010,29(8):1072-1075 (in Chinese) [9] Javadi A A, Farmani R, Tan T P. A hybird intelligent genetic algorithm[J]. Advanced Engineering Informatics,2005,19(4):255-262 [10] 钱晓明,王宁生,陈蔚芳,等.面向快速变型设计的产品结构模型研究[J].计算机集成制造系统CIMS,2003,9(1):11-14 Qian X M, Wang N S, Chen W F, et al. Research on product structure model based on rapid product design[J]. Computer Integrated Manufacturing System,2003,9(1):11-14 (in Chinese) [11] 罗护,范大鹏,吴正洪,等.一种支持变型设计的产品结构分析方法[J].机械科学与技术,2006,25(8):887-890 Luo H, Fan D P, Wu Z H, et al. A structural component-based approach to variant design[J]. Mechanical Science and Technology for Aerospace Engineering,2006,25(8):887-890 (in Chinese) [12] Rosin P. Fitting superellipses[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence,2000,22(7):726-732 [13] Fuge M, Yumer M E, Orbay G, et al. Conceptual design and modification environments[J]. Computer-Aided Design,2012,44(10):1020-1032 [14] Hu W, Sheu H. Efficient and consistent method for superellipse detection[J]. Image and Signal Processing,2001,148(4):227-233 [15] 胡钢,刘哲,徐华楠.三次均匀B样条曲线的新扩展及应用[J].计算机工程与应用,2008,44 (32):161-164 Hu G, Liu Z, Xiu H N. New extensions of the cubic uniform b-spline curve and its applications [J]. Computer Engineering and Application,2008,44(32):161-164 (in Chinese)
点击查看大图
计量
- 文章访问数: 173
- HTML全文浏览量: 22
- PDF下载量: 12
- 被引次数: 0