玻璃纤维缠绕机结构设计和芯模参数化设计

贠今天; 刘娇龙; 杨向红; 桑宏强; 许立磊

doi:10.13433/j.cnki.1003-8728.2015.0122

玻璃纤维缠绕机结构设计和芯模参数化设计

doi: 10.13433/j.cnki.1003-8728.2015.0122

1.
天津工业大学机械工程学院, 天津 300387;
2.
天津市现代机电装备技术重点实验室, 天津 300387

基金项目:

天津市高等学校科技发展基金计划项目（20120404）资助

详细信息

作者简介:
贠今天（1970-），教授，博士，研究方向为多体系统动力学与控制，yunjintian@tjpu.edu.cn

计量
- 文章访问数: 348
- HTML全文浏览量: 39
- PDF下载量: 14
- 被引次数: 0
出版历程
- 收稿日期: 2013-05-06
- 刊出日期: 2015-01-05

The Structure Design of Fiber Winding Machine and the Parametric Design of the Mandrel

1.
School of Mechanical Engineering, Tianjin Polytechnic University, Tianjin 300387;
2.
Advanced Mechatronics Equipment Technology Tianjin Area Major Laboratory, Tianjin 300387

摘要

摘要: 在机械式缠绕机的基础上，增加了吐丝头的伸缩、回转机构及张力控制机构，研发出一种新型的四轴联动的玻璃纤维缠绕机。通过计算机控制使该缠绕机四轴联动，结合相应芯模的缠绕方法，可方便快速的实现对矩形芯模、压力容器芯模等常用芯模的缠绕。为了减小缠绕过程中各层纤维之间张力的影响，采用阶梯式张力控制施加的方法；为了提高芯模的设计速度，基于Solidworks完成常用芯模的参数化设计，并构建了常用芯模的模型库，实现随时调用想要特征的芯模。
- 缠绕机 /
- 阶梯式张力 /
- 模型库 /
- 参数化
Abstract: Based on the mechanical winding machine, a new 4-Axis glass fiber winding machine is designed by adding the telescopic and slewing mechanism of guide-wire head and tension control mechanism,. Combing with the winding method of different mandrels and the computer controlling of the 4-Axis, the winding machine can wind common mandrels such as pressure vessel mandrel and rectangular mandrel. The ladder-type tension control method is applied to reduce the effect of tension of fibrous layers in the winding process. To improve the efficiency of mandrel design, mandrel parametric design is conducted based on Solidworks software and the frequently-used mandrel model library is also built.
- angular velocity /
- computer programming /
- computer software /
- control

HTML全文

参考文献(12)

[1]	Wilson B. Filament winding the jump from aerospace to commercial frame[J].SAMPE Journal,1997,33(3):25-30
[2]	李海宁,史耀耀,赵建钊,等.复合材料布铺放缠绕机设计与控制技术研究[J]. 机械科学与技术,2008,27(7):966-970 Li H N, Shi Y Y, Zhao J Z, et al. Development of a composite material tape spread winding machine[J]. Mechanical Science and Technology for Aerospace Engineering,2008,27(7):966-970 (in Chinese)
[3]	刘永纯.新型复合材料成型设备的进展[J].纤维复合材料,2011,(1):33-34 Liu Y C. Developing of new type of composite process machine[J]. Fiber Composites,2011,(1):33-34 (in Chinese)
[4]	陈云军,蒋秀明,杨公源.方型构件缠绕机张力控制系统的设计与实现[J].天津工业大学学报,2012,31(5):77-88 Chen Y J, Jiang X M, Yang G Y. Design of tension control of a winding machine for rectangular component[J]. Journalof Tianjin Polytechnic University,2012,31(5):77-88 (in Chinese)
[5]	王春香,付云忠,杨汝清,等.纤维缠绕过程中的张力分析[J].复合材料学报,2002,19(3):120-123 Wang C X, Fu Y Z, Yang R Q, et al. Tension analysis of filament winding process[J]. Acta Materiae Compositae Sinica,2002,19(3):120-123 (in Chinese)
[6]	冷兴武.纤维缠绕原理[M].济南:山东科技出版社,1990 Leng X W. The basic principle of fiber winding[M]. Jinan:Shandong Science and Technology Press,1990 (in Chinese)
[7]	史耀耀,唐虹,余强.数控布带缠绕机关键技术[J].航空学报,2008,29(1):233-239 Shi Y Y, Tang H, Yu Q. Key Technology of the NC tape-winding machine[J]. Acta Aeronautica Et Astronautica Sinica,2008,29(1):233-239 (in Chinese)
[8]	潘梁.玻璃钢压力容器缠绕系统的研究[D].天津:天津工业大学,2012 Pan L. Research on the winding system of glass steel pressure vessel[D]. Tianjin:Tianjin Polytechnic University,2012 (in Chinese)
[9]	张毅,缠绕芯模参数化设计及其应用研究[D].武汉:武汉理工大学,2011 Zhang Y, Parametric design of winding mandrel and its app1ication research[D]. Wuhan:Wuhan University of Technology,2011 (in Chinese)
[10]	Solidworks 公司. Solidworks API 二次开发[M].北京:机械工业出版社,2005 Solidworks Company. Further development of solidworks API[M]. Beijing:China Machine Press,2005 (in Chinese)
[11]	刘庆立,曹巨江,姚素芬,等.基于Solidworks二次开发技术[J].煤矿械,2009,30(8):202-204 Liu Q L, Cao J J, Yao S F, et al. Based on further development technology of solidworks[J]. Coal Mine Machinery,2009,30(8):202-204 (in Chinese)
[12]	龚沛曾,杨志强,陆慰民.Visual Basic程序设计教程[M].北京:高等教育出版社,2011 Gong P Z,Yang Z Q, LU W M. Visual Basic programming tutorial[M]. Beijing:Higher Education Press,2011 (in Chinese)