基于遗传算法的液压机上梁交互式结构优化

刘星; 陆宝春; 田先春; 蒋淮同

doi:10.13433/j.cnki.1003-8728.2015.0106

基于遗传算法的液压机上梁交互式结构优化

doi: 10.13433/j.cnki.1003-8728.2015.0106

1.
南京理工大学机械工程学院, 南京 210094;
2.
江苏腾宇机械制造有限公司, 宿迁 223812

基金项目:

国家火炬计划项目（GH2011040550）资助

详细信息

作者简介:
刘星（1990-），硕士研究生，研究方向为机械结构优化设计，liuxing1990.ok@163.com

通讯作者:
陆宝春，教授，博士，lbcnust@sina.com

计量
- 文章访问数: 117
- HTML全文浏览量: 17
- PDF下载量: 10
- 被引次数: 0
出版历程
- 收稿日期: 2013-07-04
- 刊出日期: 2015-01-05

Interactive Structural Optimization for the Upper Cross Beam of a Hydraulic Press Based on Genetic Algorithm

1.
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094;
2.
Jiangsu Tengyu Machinery Manufacture Co., Ltd, Suqian 223812

摘要

摘要: 很多结构优化问题的数学模型并不存在或难以求解，传统优化方法难以对这类问题进行准确寻优，需要使用交互式结构优化方法。针对基本遗传算法的缺陷，提出了一种改进型遗传算法。以700T铸造式液压机上梁（简称上梁）为例，建立结构优化模型和遗传算法模型。以上梁的最大变形和最大等效应力为约束条件，以重量为目标函数，基于有限元法和改进遗传算法对上梁进行了交互式结构优化设计。优化结果使上梁变形基本保持不变，最大等效应力降低5.87%，同时使上梁减重12.09%。
- 液压机上梁 /
- 交互式结构优化 /
- 改进遗传算法 /
- 有限元法
Abstract: The traditional optimization methods cannot find the exact optimal solution of many structural optimization problems because the mathematic models of these types of problems do not exist or can hardly be solved accurately. So interactive method is proposed to cope with the challenge. To overcome the shortcomings of simple genetic algorithms, an improved genetic algorithm (IGA) is proposed. Through analyzing the upper cross beam structure of a 700T cast hydraulic press, the structural optimization model and IGA model of the upper cross beam are built to undertake the IGA-FEM(Finite Element Method) interactive mechanical structure optimization with the objective of light weight and the constraints of qualified stiffness and strength. The optimization results show that the deformation of the upper cross beam maintains the status quo and the maximum equivalent stress is declined by 5.87% while the weight is decreased by 12.09% in comparison to the original design.
- deformation /
- evolutionary algorithms /
- finite element method /
- genetic algorithms

HTML全文

参考文献(9)

[1]	李艳聪,张连洪,刘占稳,等.刚度和质量驱动的预紧组合框架式液压机多目标优化设计[J].机械工程学报,2010,46(1):140-146 Li Y C, Zhang L H, Liu Z W, et al. Multi-objective optimization design of heavy force framed hydraulic press driven by stiffness and mass[J]. Journal of Mechanical Engineering,2010,46(1):140-146 (in Chinese)
[2]	张军,林程,张国明.基于遗传算法的客车车身骨架优化设计[J].北京理工大学学报,2008,28(1):45-49 Zhang J, Lin C, Zhang G M. An optimization design method of bus body frame based on genetic algorithm[J]. Transactions of Beijing Institute of Technology,2008,28(1):45-49 (in Chinese)
[3]	周明,孙树栋.遗传算法原理及应用[M].北京:国防工业出版社,1999 Zhou M, Sun S D. Genetic algorithms:theory and applications[M]. Beijing:National Defense Industry Press,1999 (in Chinese)
[4]	Srinivas M, Patnaik L M. Adaptive probabilities of crossover and mutation in genetic algorithms[J]. IEEE Transactions on SMC,1994,24(4):656-667
[5]	唐文艳,顾元宪.遗传算法在结构优化中的研究进展[J].力学进展,2002,32(1):26-40 Tang W Y, Gu Y X. Advances of genetic algorithms in structural optimization[J]. Advances in Mechanics,2002,32(1):26-40 (in Chinese)
[6]	唐文艳,顾元宪.遗传算法中约束的凝聚选择和复合型处理方法[J].工程力学,2002,19(6):58-62 Tang W Y, Gu Y X. Surrogate reproduction and complex method for handling constraints in optimization by genetic algorithm[J]. Engineering Mechanics,2002,19(6):58-62 (in Chinese)
[7]	李艳聪,张连洪,刘占稳,等.基于神经网络和遗传算法的液压机上梁轻量化和刚度优化设计[J].机械科学与技术,2010,29(2):164-169 Li Y C, Zhang L H, Liu Z W, et al. Lightweight and stiffness optimization of a hydraulic press's upper beam based on neural networks and genetic algorithms[J]. Mechanical Science and Technology for Aerospace Engineering,2010,29(2):164-169 (in Chinese)
[8]	玄光男,程润杰.遗传算法与工程优化[M].于歆杰,周根贵,译.北京:清华大学出版社,2004 Xuan G N, Cheng R J. Genetic algorithms and engineering optimization[M]. Yu X J, Zhou G G, Translate. Beijing:Tsinghua University Press,2004 (in Chinese)
[9]	周宁.ANSYS-APDL高级工程应用实例分析与二次开发[M].北京:中国水利水电出版社,2007 Zhou N. Case study and secondary development of advanced engineering applications with ANSYS-APDL[M]. Beijing:China Water Power Press,2007 (in Chinese)