电静液作动器不确定性建模分析与可靠度计算

赫英凤; 段富海; 金霞; 赵静静

doi:10.13433/j.cnki.1003-8728.2014.1236

电静液作动器不确定性建模分析与可靠度计算

doi: 10.13433/j.cnki.1003-8728.2014.1236

1.
太原工业学院, 太原 030008;
2.
大连理工大学, 大连 116024

详细信息

作者简介:
赫英凤(1985- ),助教,研究方向为复杂系统设计与可靠性分析,1604062180@qq.com

计量
- 文章访问数: 123
- HTML全文浏览量: 24
- PDF下载量: 4
- 被引次数: 0
出版历程
- 收稿日期: 2013-05-31
- 刊出日期: 2014-12-05

Uncertainty Modeling Analysis and Reliability Calculation of Electro-hydrostatic Actuator

1.
Taiyuan Institute of Technology, Taiyuan 030008;
2.
Dalian University of Technology, Dalian 116024

摘要

摘要: 不确定性是影响飞机电静液作动器(EHA)可靠性的主要因素。针对消除不确定性影响和提高EHA可靠性的问题,研究了基于概率论的EHA不确定性建模与可靠度计算方法。对EHA不确定性进行了定性分析;在建立EHA线性数学模型基础上,给出了一种不确定性建模方法,并据此分别考虑独立不确定因素和多不确定因素的影响,提出了EHA对这些参数的不确定性建模和可靠度计算方法;以EHA作动筒截面积对输出位移影响为例进行演算,采用Matlab进行仿真对比验证,证明了EHA不确定性模型和可靠度计算方法的正确性。
- 电静液作动器(EHA) /
- 不确定性 /
- 建模 /
- 可靠性
Abstract: Uncertainty is one of the main factors that affect the aircraft electro-hydrostatic actuator's(EHA)reliability. In order to eliminate uncertainty effects and improve the reliability of the EHA,the uncertainty modeling and the reliability calculation method of the EHA are studied based on the probability theory in this paper. The uncertainty of the EHA is analyzed qualitatively,an uncertainty modeling method is proposed based on the established linear mathematical model. Considering influence of the single parameter and the multi-parameters to the model respectively,the uncertainty modeling and the reliability calculation methods of the EHA are established.Finally,the established model is verified by taking the influence of the actuator 's cross-sectional area to output displacement as an example,and the availability of the method is verified by comparing with the simulation results of the Matlab.
- actuators /
- aircraft /
- availabity /
- brushless DC motors

HTML全文

参考文献(8)

[1]	李军,付永领,王占林机载电静液作动系统的发展现状与关键技术研究[J]航空制造技术,2005,(11);64-68 Li J,Fu Y L,Wang Z L.Research on the development and key techniques of airborne EHA system[J] Aeronautical Manufactauring Technology,2005,(11):64-68(in Chinese)
[2]	原薇基于可靠性的多学科设计优化[D]大连:大连理工大学,2006 Yuan W Reliability based multidisciplinary design optimization[D]Dalian:Dalian University of Technology,2006(in Chinese)
[3]	张为华,李晓斌飞行器多学科不确定性设计理论概述[J]宇航学报,2004,(6);702-706 Zhang WH,Li X B.Reliability based multidisciplinary design optimization[J]Journal of Astronautic、,2004, (6); 702-706(in Chinese)
[4]	Timothy W Simpson,Joaquim R.R.A.Martins Multidisciplinary design optimization for complex engineered systems:report from a national science foundation workshop[J]ASME Journal of Mechanical Design,2011,133(10):1-10
[5]	吴娟,肖勇,林维忠机载电静液作动器的建模与仿真[J] 火力与指挥控制,2010,35(7);93-96 Wu J,Xiao Y,Lin W Z.Modeling and simulation of airborne electaro-hydrostatic: actauator]J].Fire C ontrol and Command Control,2010,35 (7); 93-96(in Chinese)
[6]	马纪明,付永领,李军,等-体化电动静液作动器 (EHA)的设计与仿真分析[J]航空学报,2005,26 (1);79-83 Ma J M,Fu Y L,Li J,et al.Design,simulation and analysis of integrated electarical hydrostatic: actauator[J] Acaa Aeronautic:a et Astronautic:a Sinic:a,2005,26(1): 79-83(in Chinese)
[7]	苏子健多学科优化的分解、协同及不确定性研究[D] 武汉:华中科技大学,2008 Su Z J.Research on the decomposition,collahoration and uncertainty of multidisciplinary optimization [D].Wuhan: Huazhong University of science and Technology,2008(in Chinese)
[8]	Michelle R K.A methodology for technology identification,evaluation and selectaion in conceptual and aircraft design[D]Georgia:Georgia Institute of Technology,2001