安装误差对准双曲面齿轮啮合性能的影响

王星; 方宗德; 李声晋; 王国莹

doi:10.13433/j.cnki.1003-8728.2014.1203

安装误差对准双曲面齿轮啮合性能的影响

doi: 10.13433/j.cnki.1003-8728.2014.1203

1.
西北工业大学机电学院, 西安 710072;
2.
中国北方发动机研究所, 天津 300400

基金项目:

国家自然科学基金项目(51175423)资助

详细信息

作者简介:
王星(1982- ),博士研究生,研究方向为齿轮设计制造,wxing292@163.com。

通讯作者:
方宗德,教授,博士生导师,fauto@nwpu.edu.cn。

计量
- 文章访问数: 153
- HTML全文浏览量: 30
- PDF下载量: 6
- 被引次数: 0
出版历程
- 收稿日期: 2013-06-20
- 刊出日期: 2014-12-05

The Effect of the Assembly Misalignment on the Meshing Performance of Hypoid Gear

1.
School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072;
2.
China North Engine Research Institute, Tianjing 300400

摘要

摘要: 安装误差是影响齿轮啮合性能的关键因素,接触印痕和传动误差比较完整地表达了齿轮副在空载或轻载下的啮合性能.针对接触印痕和传动误差,研究了安装误差对准双曲面齿轮啮合性能的影响,该方法突破了传统靠实践经验来调整齿轮副现场安装的局限性.根据格里森HFT(hypoid formatetilt)准双曲面齿轮的加工原理和加工方法,建立了切齿加工数学模型,推导了理论齿面方程.以一对准双曲面齿轮为例,在考虑安装误差的情况下进行了轮齿接触分析(tooth contact analysis,TCA),研究了安装误差对啮合性能的影响.结果表明:准双曲面齿轮对安装误差敏感性较低.
- HFT /
- 准双曲面齿轮 /
- TCA /
- 安装误差 /
- 啮合性能
Abstract: The assembly misalignment is a key factor that influences the meshing performance of gear,the meshing performance worked on no-load or light load conditions is more completely expressed,by the contact pattern and transmission error. According to the contact pattern and transmission error,the effect of assembly misalignment on the meshing performance of hypoid gear is studied,the present method break the limitations relying on experience to adjust the installation. Based on the machining principle and method of Gleason hypoid gears which machined by the HFT method,the mathematical model for machining was established,and the theoretical tooth surface equations were derived,on the above-mentioned,the hypoid gear as an example,the tooth contact analysis(TCA) was carried out by considering assembly misalignment,the effect of assembly misalignment on the meshing performance was studied,the results show that the hypoid gears are less sensitive to the assembly misalignment.
- assembly misalignment /
- errors /
- gears /
- HFT /
- Hypoid gear

HTML全文

参考文献(8)

[1]	吴序堂刀倾半展成法加工弧齿锥齿轮及准双曲面齿轮的机床调整[J]制造技术与机床,1981,11;6-9,17 Wu X T.The machine tool adjustment in machining spiral bevel gear and hypoid gear with the tilting and half generating method[J]Manufactauring Technology& Machine Too1,1981,11;6-9,17(in Chinese)
[2]	吴序堂准双曲面齿轮啮合原理及其在刀倾半展成加工中的应用[J]西安交通大学学报,1981,1(15);9-20 Wu X T.The meshing principle of hypoid gear and its application on the tilting and half generating method[J] Journal of Xi'an Jiaotong University,1981,1(15):9-20 (in Chinese)
[3]	方宗德,杨宏斌准双曲面齿轮传动的轮齿接触分析[J] 汽车工程,1998,zo[6] Fang Z D,Yang H B.Tooth contacta analysis of hypoid gears[J]Automotive Engineering,1998,20(6)(in Chinese)
[4]	王峰,方宗德,李声晋,等考虑安装误差的摆线齿准双曲面齿轮轮齿接触分析[J]农业机械学报,2012,43(9)Wang F,Fang Z D,Li S J,et al.Tooth contacta analysis of epicyctaoid hypoid gear considering assembly misalignment]J].Transactaions of the Chinese Society for Agricultural Machinery,2012,43(9)(in Chinese)
[5]	方宗德,杨宏斌准双曲面齿轮传动的轮齿接触分析[J] 汽车工程,1998,20(6);350-355 Fang Z D,Yang H B.Tooth contacta analysis of hypoid gears[J].Automotive Engineering,1998,20 (6):350-355 (in Chinese)
[6]	Litvin F L.Gear geometry and applied theory [M].Englewood Cliff's,NJ:Prentice Ha11,1994
[7]	方宗德,郭琳琳,苏进展,等基于齿面印痕控制的弧齿锥齿轮公差优化设计[J]农业机械学报,2011,42 (7);223-228 Fang Z D,Guo L L,Su J Z,et al.Optimal design of tolerance for spiral bevel gears by controlling contacta path[J]Transactaions of the Chinese Society for Agricultural Machinery,2011,42(7):223-228(in Chinese)
[8]	邓效忠,方宗德,魏冰阳接触路径对弧齿锥齿轮接触应力和弯曲应力的影响[J]中国机械工程,2003,14 (22):1895-1898 Deng X Z,Fang Z D,Wei B Y.The elfecta of contacta path on the contacta stress and bending stress of the spiral bevel gear[J].China Mechanical Engineering,2003,14 (22):1895-1898(in Chinese)