Analysis of the Equivalent Flexural and Torsional Stiffness for Accordion Cellular Honeycomb
-
摘要: 手风琴式蜂窝材料因其零泊松比和大应变特性,日益受到航空界的关注。将手风琴蜂窝材料等效为均质正交各向异性薄板,提出了基于能量等效原理的手风琴蜂窝材料等效弯曲刚度和等效扭转刚度的理论分析方法,得到了等效刚度系数的解析表达式,并分析了其对胞元结构参数的敏感性。建立了手风琴蜂窝板的参数化模型,并运用数值仿真反演技术,得到了手风琴蜂窝材料的等效刚度系数。通过对比等效刚度系数的理论解与反演解,表明了该理论分析方法的可行性和正确性。Abstract: The accordion cellular honeycomb has an increasing attention in the aviation industry over the lastdecade, because of the zero Poisson' s ratio and high-strain capability.In this paper, the accordion cellularhoneycomb is equivalent to a homogeneous orthogonal anisotropic plate.A novel analytical method for solving theequivalent flexural and torsional stiffness of the accordion cellular honeycomb was proposed based on the energyequivalence principle.And the analytical expressions of the equivalent stiffness were derived.Furthermore, theinfluence of the base cell structure parameters on the equivalent stiffness was studied.With the parameterized modelof the accordion cellular honeycomb being established, a set of inversion method based on the numerical simulationhas been used to obtain the equivalent stiffness.The comparisons between the theoretical results with the inversionresults show that the present analytical method is feasible and valid.
-
Key words:
- accordion cellular honeycomb /
- anisotropy /
- aviation /
- bending(deformation)
-
[1] Gibson L J，Ashby M F，Schajer G S，et al.Themechanics of two-dimensional cellular materials [C]//Proc.R.Soc.Lond.A,1982,382: 25-42 [2] Gibson Lorna J.多孔固体结构与性能[M].刘培生，译.北京: 清华大学出版社,2003Gibson Lorna J.Cellular solids structure and properties[M].Liu P S，Translate.Beijing: Tsinghua University Press，2003 (in Chinese) [3] 王颖坚.蜂窝结构在面内剪力作用下的变形模式[J].北京大学学报,1991，3(27): 301-307Wang Y J.The deformation pattern of honeycombstructure under in-plane shear [J].Acta ScientiarumNaturalium Universitatis Pekinensis，1991，3(27): 301-307 (in Chinese) [4] 富明慧，尹久仁.蜂窝芯层的等效弹性参数[J].力学学报,1999,31(1): 113-118Fu M H，Yin J R.Equivalent elastic parameters of thehoneycomb core[J].Acta Mechanica Sinica，1999，31(1): 113-118 (in Chinese) [5] 富明慧，刘祚秋，刘耀鹏.蜂窝夹层板的一种等效单层模型[J].工程力学,2001(z): 700-704Fu M H，Liu Z Q，Liu Y P.The single layer equivalentmodel of honeycomb sandwich panel[J].EngineeringMechanics,2001(z): 700-704 (in Chinese) [6] Chen D H.Equivalent flexural and torsional rigidity ofhexagonal honeycomb[J].Composite Structures，2011，93(7): 1910-1917 [7] Olympio K R，Gandhi F.Zero poisson' s ratio cellularhoneycombs for flex skins undergoing one-dimensionalmorphing[J].Journal of Intelligent Material Systemsand Structures,2010,21(17): 1737-1753 [8] Olympio K R，Gandhi F.Flexible skins for morphingaircraft using cellular honeycomb cores[J].Journal ofIntelligent Material Systems and Structures，2010，21(17): 1719-1735 [9] 董文俊，孙秦.手风琴式蜂窝材料的等效弹性模量分析[J].机械科学与技术,2011,30(7): 1103-1106Dong W J，Sun Q.Equivalent elastic modulus analysisof accordion cellular material[J].Mechanical Scienceand Technology for Aerospace Engineering，2011，30(7): 1103-1106 (in Chinese) [10] 吴艳.复合材料结构的实用优化设计技术及应用研究[D].西安: 西北工业大学,2003Wu Y.Applied optimal design techniques study with theapplication of advanced composite structure[D].Xi' an:Northwestern Polytechnical University,2003 (in Chinese)1584 -
点击查看大图
计量
- 文章访问数: 249
- HTML全文浏览量: 28
- PDF下载量: 3
- 被引次数: 0
下载:
