新型非圆锥齿轮摆停-步进装置

郑方焱; 李波; 吴俊峰; 陈定方

doi:10.13433/j.cnki.1003-8728.2014.1011

新型非圆锥齿轮摆停-步进装置

doi: 10.13433/j.cnki.1003-8728.2014.1011

1.
武汉理工大学物流工程学院, 武汉 430063;
2.
湖北行星传动设备有限公司, 黄冈 438000

基金项目:

国家自然科学基金项目(51175395)和教育部博士点基金项目(20090143110005)资助

详细信息

作者简介:
郑方焱(1988-)，博士，研究方向为啮合理论和刚体动力学，382280761@qq.com;陈定方(联系人)，教授，博士生导师，cadcs@126.com

郑方焱(1988-)，博士，研究方向为啮合理论和刚体动力学，382280761@qq.com;陈定方(联系人)，教授，博士生导师，cadcs@126.com

计量
- 文章访问数: 103
- HTML全文浏览量: 18
- PDF下载量: 4
- 被引次数: 0
出版历程
- 收稿日期: 2013-03-25

A New Type of Non-circular Bevel Gear Swing Stop-step Device

1.
School of Logistics Engineering, Wuhan University of Technology, Wuhan 430063;
2.
Hubei Planetary Gear Boxes Co．LTD, Huanggang 438000

摘要

摘要: 基于圆锥齿轮-非圆锥齿轮差动轮系,提出一种新型非圆锥齿轮摆停-步进装置。阐述了其工作原理,推导出位于其传动核心的一对非圆锥齿轮的传动比函数,结合非圆锥齿轮的相关理论阐述了其设计和校核方法。以实例的方式建立了装置的三维模型,利用ADAMS得到了装置的位移响应,证实了上述方法和原理的正确性。
- 非圆锥齿轮 /
- 节锥面 /
- 差动轮系
Abstract: Based on the circular-non circular bevel gear differential gear train, a new type of non-circular bevelgear swing stop-step device is designed in this paper.The principle of this device is describedand the transmissionratio function of a pair of non-circular bevel gear located in the transmission center is deduced.The design andchecking method based on the theory of non-circular bevel gear is expounded.Finally a virtual prototype of thisdeviceis established and its displacement responseis obtained by using ADAMS software, The results verify thecorrectness of the proposed design method and principle.
- angular velocity /
- bevel gears /
- boundary conditions

HTML全文

参考文献(8)

[1]	洪振宇，许致华.一种具有大分度数新型行星分度凸轮机构凸轮廓线设计[J].机械设计,2008,25(9): 35-37Hong Z Y，Xu Z H.Cam contour line design of a kind ofnew typed planetary indexing cam mechanism possessinglarge indexing number[J].Journal of Machine Design，2008,25(9): 35-37 (in Chinese)
[2]	贺炜，刘俊生，刘志良，等.数控加工中心ATC 弧面分度凸轮运动学问题研究[J].组合机床与自动化加工技术,2003，(6): 9-11He W，Liu J S，Liu Z L.The kinematics research ofgloboid cam of ATC in machining center[J].ModularMachine Tool & Automatic Manufacturing Technique，2003，(6): 9-11 (in Chinese)
[3]	刘伟，何雪明，陈周，等.问歇分度凸轮机构的凸轮曲线图谱研究[J].机械设计与制造,2009，(9): 208-209Liu W，He X M，Chen Z，et al.The cam curve mapstudy of intermittent indexing cam mechanism [J].Machinery Design & Manufacture，2009，(9): 208-209(in Chinese)
[4]	林超，侯玉杰，龚海，等.高阶变性椭圆锥齿轮传动模式设计与分析[J].机械工程学报，2011，47 (13):131-139Lin C，Hou YJ，Gong H，et al.Design and analysis oftransmission mode for high-order deformed elliptic bevelgears[J].Journal of Mechanical Engineering，2011，47(13): 131-139 (in Chinese)
[5]	Litvin F L.Gear geometry and applied theory[M].Prentice-Hall，Englewood Cliffs,New Jersey，1994:20-40
[6]	赵玉民，倪俊义，马延会，等.非圆锥齿轮的三维计算机辅助设计[J].机械传动,2010,34(9): 47-49Zhao Y M，Ni J Y，Ma Y H，et al.The 3D modeling ofnoncircular bevel gear [J].Journal of MechanicalTransmission,2010,34(9): 47-49 (in Chinese)
[7]	吴序堂.齿轮啮合原理[M].2 版.西安: 西安交通大学出版社,2009: 20-30Wu X T.Principle of gearing[M].2 Edition Xi' anJiaotong University Press,2009: 20-30 (in Chinese)
[8]	林超，龚海，侯玉杰，等.高阶椭圆锥齿轮齿形设计与加工[J].中国机械工程,2012,23(3): 253-257Lin C，Gong H，Hou Y J，et al.Tooth profile design andmanufacture of higher-order elliptical bevel gears[J].China Mechanical Engineering,2012,23(3): 253-257 (in Chinesee)