Research on the Parts Traversal of Variant Design for Complicated Product
-
摘要: 针对复杂产品变型设计过程中零部件的查询问题,提出了一种零部件遍历方法。根据产品构成各零件之间的配合关系,建立了产品主模型。通过分析产品主模型和遍历算法的特点,给出了适合复杂产品变型设计的零部件遍历规则,规定了产品中零部件的遍历方向。借助VC++语言,对SolidWorks三维软件进行了二次开发,实现了复杂产品的变型设计。最后,以垃圾破碎机为例,对提出的方法进行了验证。Abstract: Aiming at the issues of parts requirement in the process of variant design for complicated product,a part traversal was proposed. Product main model was established according to the mating relationship among constituent parts of product. Then,product main model and the characteristics of traversal algorithm were analyzed,parts traversal rules adaptive for complicated product variant design was given,parts traverse direction for product were provided. The 3D(Three Dimensions) of Solidworks was developed with VC++(Visual C++). The complicated product's variant design was implemented. Finally,an example of garbage crusher is given to verify all methods which were applied.
-
Key words:
- complicated product /
- product main mode /
- traversal rule /
- variant design
-
[1] 龚京忠，邱静，李国喜，等. 产品模块可拓变型设计方法[J]. 计算机集成制造系统，2008，14(7):1256-1267Gong J Z，Qiu J，Li G X，et al. Extension approach forproduct module variant design [J]. Computer IntegratedManufacturing Systems，2008，14 (7): 1256-1267 (in Chinese) [2] 鲁玉军，余军合，祁国宁，等. 基于事物特性表的产品变型设计[J]. 计算机集成制造系统，2003，9(10):840-844Lu Y J，Yu J H，Qi G N，et al. Product variant designbased on tabular layouts of article characteristics [J].Computer Integrated Manufacturing Systems，2003，9(10):840-844 (in Chinese) [3] 徐新胜，方水良，李强，等. 装配产品的变型设计研究[J]. 浙江大学学报，2006，40(9):1652-1656Xu X S，Fang S L，Li Q，et al. Research on assemblyvariant design[J]. Journal of Zhejiang University，2006，40(9):1652-1656 (in Chinese) [4] 齐从谦，贾伟新. 支持变型设计的装配模型建模方法研究[J]. 机械工程学报，2004，40(1): 38-42Qi C Q，Jia W X. Research on assembly modeling forproduct variant design [J]. Chinese Journal of MechanicalEngineering，2004，40(1):38-42 (in Chinese) [5] 吴庆鸣，宗驰，张强，等. 复杂产品变型设计及其参数传递方法研究 [J]. 中国机械工程，2008，19(24):2955-2959Wu Q M，Zong C，Zhang Q，et al. Research on variantdesign and parameter transfer method for complicatedproducts[J]. China Mechanical Engineering，2008，19(24):2955-2959 (in Chinese) [6] 方水良，沈振华. 复杂变型产品参数传递结构研究[J]. 计算机集成制造系统，2006，12(12):1934-1938Fang S L，Shen Z H. Parameters transfer structure forcomplicated product variant design [J]. ComputerIntegrated Manufacturing Systems，2006，12(12):1934-1938 (in Chinese) [7] 邓小林，刘夫云，黄美发，等. 基于复杂网络的产品变型设计方法 [J]. 机械科学与技术，2009，28 (4):505-509Deng X L，Liu F Y，Huang M F，et al. Research onvariant design based on complex network[J]. MechanicalScience and Technology for Aerospace Engineering，2009，28(4):505-509 (in Chinese) -
点击查看大图
计量
- 文章访问数: 114
- HTML全文浏览量: 10
- PDF下载量: 2
- 被引次数: 0
下载:
