Structural Design and Static Analysis of the TrT Blade with Cylindrical Lashing Wire
-
摘要: 将在汽轮机叶片上经常采用的阻尼拉金减振方法借鉴应用到TrT叶片,设计了多种圆柱阻尼拉金结构并建立分析模型,通过分析获得各自的力学性能,依据力学性能选取性能最为理想的阻尼结构。对每个模型进行了静态分析,并重点对拉金孔处、过渡曲面处、一二级榫齿槽面等应力敏感区域进行切片分析;对计算结果采用最小二乘法拟合出应力与拉金孔直径和位置之间的变化规律曲线;综合考虑各种阻尼结构的力学特性,采用分级加权评价方法,得出了力学性能最优的叶片阻尼结构。Abstract: The damping lashing wire method used widely in gas turbine blade vibration reduction is introduced tothe TrT blade in this study. A variety of the models with different cylindrical damping lashing wire structures areestablished. Their mechanical properties are obtained through analyses. Based on the static analysis result of eachmodel, the most ideal damping structure is chosen. Since the key locations such as lashing wire hole, transitionalsurfaces and the groove faces of the two-stage tendon teeth, are probably sensitive to stress, the slicing analyses aregiven focused on them. Secondly, the curves of the lashing wire diameters of the hole and their locations are drawnby using the least square method with the calculated results. Finally, the mechanical characteristics of all dampingstructures are considered comprehensively and the damping structure that has the optimum mechanical property isobtained by using the weighting evaluation method.
-
Key words:
- cylindrical lashing wire /
- damping /
- mechanical properties /
- optimization /
- slicing analysis
-
[1] 单颖春, 朱梓根, 晏砺堂, 等.干摩擦阻尼块在叶片减振中的应用与发展[J]. 航空动力学报, 2001, 16(2):218-223Shan Y C, Zhu X G, Yan L T, et al.Application and development of platform friction damper for depressing resonant vibration of blades[J]. Journal of Aerospace Power, 2001, 16(2): 218-223 (in Chinese) [2] 李录平, 晋风华, 李杰, 等.透平叶片几种减振结构的阻尼 特 性 试 验 研 究[J]. 动 力 工 程, 2004, 24 (6):793-797Li L P, Jin F H, Li J, et al.Experimental research on damping characteristics of four kinds of vibration absorbing constructions for turbine blades[J]. Power Engineering, 2004, 24(6): 793-797 (in Chinese) [3] 季葆华, 李锋, 谢永慧, 等.现代汽轮机叶片阻尼结构形式设计方法的研究[J]. 西安交通大学学报, 1999,33(8): 40-43Ji B H, Li F, Xie Y H, et al.Design method of damped structures for steam turbine blades[J]. Xi'an Jiaotong University Xuebao,1999,33(8):40-43 (in Chinese) [4] 刘东远, 孟庆集.汽轮机叶片阻尼计算模型及特性分析[J]. 汽轮机技术, 1998, 40(1): 15-18Liu D Y, Meng Q J.The calculation model and performance analysis of damping turbine blade [J].Turbine Technology, 1998, 40(1): 15-18 (in Chinese) [5] 徐大懋, 陆永良, 任 大康, 等.双拉金 1 m 长叶片的研制[J]. 动力工程, 1996, 16(4): 1-9Fan D M, Lu Y L, ren D K, et al.research on double lashing wire blade with 1m long [J]. Power Engineering, 1996, 16(4): 1-9 (in Chinese) [6] 谢永慧, 孟庆集.汽轮机叶片三维有限元模型的建立及静态与动态应力分析[J]. 热力透平, 2003, (1):36-42Xie Y H, Meng Q J.Three dimensional finite element model for turbine blade and static & dynamic stress analysis[J]. Thermal Turbine, 2003,(1): 36-42 (in Chinese) [7] 丁有宇, 周宏利, 徐铸, 等.汽轮机强度计算[M]. 北京: 水利水电出版社, 1984Ding Y Y, Zhou H L, Xu Z, et al.The strength calculation of steam turbine[M]. Beijing: China Water Power Press, 1984 (in Chinese) [8] 吴厚钰.透平零件结构和强度计算[M]. 西安: 西安交通大学出版社, 2007Wu H Y.Calculation and strength with structural parts of turbine [M]. Xi'an: Xi'an Jiaotong University Press,2007 (in Chinese) [9] Chen J L, Shen D r, Chen J H, et al.research on boundary blade by finite conditions of t steam turbine element model analysis[J]. Power Engineering, 2004,24(4): 510-13 [10] Li D X, Qin S F, Zhang C, et al.research on static and dynamic characteristics of damping blade of the blast furnace top gas recovery turbine[J]. Mechanical Science and Technology for Aerospace Engineering,2011, 30(12): 2029-2035 [11] 李德信, 秦山峰.高炉煤气余压透平叶片阻尼结构及减振 研 究[J]. 机 械 科 学 与 技 术, 2011, 30 (12):2029-2035Li D X, Qin S F.research on damped structure and vibration reduction of the turbine blade[J]. Mechanical Science and Technology for Aerospace Engineering,2011, 30(12): 2029-2035 (in Chinese)
点击查看大图
计量
- 文章访问数: 94
- HTML全文浏览量: 16
- PDF下载量: 4
- 被引次数: 0