板料局部成形成形极限的数值研究

文鹏飞; 刘渝; 汪威

doi:10.13433/j.cnki.1003-8728.2014.0631

板料局部成形成形极限的数值研究

doi: 10.13433/j.cnki.1003-8728.2014.0631

1.
西华大学,机械工程与自动化学院成都 610039

基金项目:

四川省教育厅重大培育项目(12202573)

四川省教育厅重点项目(10ZA101)资助

详细信息

作者简介:
文鹏飞(1987-)，硕士研究生，研究方向为模具CAD/CAM，xhuwenpengfei@163.Com

通讯作者:
刘渝，教授，博士后，liuyu1963@263.net

计量
- 文章访问数: 189
- HTML全文浏览量: 39
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2012-12-14
- 刊出日期: 2015-06-10

The Numerical Analysis for Local Forming Limit of Sheet Metal

1.
School of Mechanical Engineering and Automation,Xihua University,Chengdu 610039

摘要

摘要: 通常在板料冲压成形中,通过成形极限图来预测板料成形时的缩颈、破裂现象。而采用增量成形技术成形板料时,板料的成形极限高于传统冲压成形。这一现象导致了从成形机理上研究板料增量成形极限为什么会高于传统冲压成形极限成为当前的研究热点。假定厚度方向的几何缺陷来表示局部弱化区,通过在板料厚度方向引入工具作用来研究局部材料的稳定性的影响。分别采用BAMMAN_DAMAGE模型和假定几何缺陷的方法来研究横向模具作用对板料成形均匀化的影响。通过数值模拟的方法研究了增量成形能提高成形极限的原因及机理,并考察在这个过程中板料应力和板料应变的变化情况。
- 局部成形 /
- 增量成形 /
- 成形极限 /
- 缩颈
Abstract: Generally, the forming limit diagram is used to predict the sheet neck and fracture in the conventionalforming process. The phenomenon that for forming the parts via Incremental sheet forming (ISF), the forming limitis much higher than that via conventional sheet forming has aroused a research interest in forming mechanism oflocal forming process in recent years. In this paper, the geometrical imperfection in the thickness was considered torepresent local weakening zone and by using the BAMMAN _ DAMAGE material model and assuming geometricimperfection method separately to study the effect of the non-homogenization on the sheet forming limit. The causeand mechanism for improving of forming limit during the incremental forming process was studied by the numericalsimulation method. And the variations of stress and strain during the forming process were also studied.
- defects /
- fracture /
- finite element method /
- forming limit

HTML全文

参考文献(11)

[1]	张庆丰,贾平,周旭东,等．板料增量成形的研究进展[J]. 锻压技术,2010,2(2): 6-11Zhuang Q F,Jia P,Zhou X D,et al．research development of incremental sheet metal forming[J].Forging & Stamping Technology,2010,2 (2): 6-11 (in Chinese)
[2]	Emmens W C,Sebastiani G,van den Boogaard A H．The technology of incremental sheet forming a brief review of the history [J]. Journal of Materials Processing Technology,2010，(210): 981-997
[3]	Filice C,Fantini L,Micari F．Analysis of material formability in incremental forming[J]. CIrP Annalsmanufacturing Technology,2002,51 (1): 199～202
[4]	Myoung-Sup Shim,Jong-Jin Park．The formability of aluminum sheet in incremental forming[J]. Journal of Materials Processing Technology,2001: 654-685
[5]	Kim T J,Yang D Y．Improvement of formability for the incremental sheet metal forming process [J].International Journal of Mechanical Sciences,2000，(42): 1271-1286
[6]	Kim Y H,Park J J．Effect of process parameters on formability in incremental forming of sheet metal[J].Journal of Materials Processing Technology,2002，(130/131): 42-46
[7]	李磊,周晚林,HUSSAIN．金属板料单点渐进成形极限的数值模拟预测[J]. 机械工程学报,2010,46(18)Li L,Zhou W L,HUSSAIN．Prediction of single point incremental forming limit [J]. Chinese Journal of Mechanical Engineering,2010,46(18) (in Chinese)
[8]	Hamilton K,Jeswiet J．Single point incremental forming at high feed rates and rotational speeds: Surface and structural consequences[J]. CIrP Annals-Manufacturing Technology,2010，(59): 311-314
[9]	Horstemeyer M F．A numeriacal parametric investigation of localization an forming limits [r]. Center for Materials an Engineering Sciences MS 9405.Sandia National Luboratories Livermore,CA 94551-0969
[10]	Emmensa W C,van den Boogaardb A H．An overview of stabilizing deformation mechanisms in incremental sheet forming [J]. Journal of Materials Processing Technology,2009，(209): 3688-3695
[11]	rajiv Malhotra,Liang X,Ted Belytschko,et al．Mechanics of fracture in single point incremental forming[J]. Journal of Materials Processing Technology,2012: 1573-1590