制冷系统涡旋压缩机涡旋盘重构与反求技术研究

王立存; 张贤明; 杨旭; 王旭东; 张国进; 周凯

doi:10.13433/j.cnki.1003-8728.2014.0510

制冷系统涡旋压缩机涡旋盘重构与反求技术研究

doi: 10.13433/j.cnki.1003-8728.2014.0510

王立存^1,2,3,
张贤明²,
杨旭²,
王旭东^1,2,
张国进³,
周凯¹

1.
重庆工商大学制造装备机构设计与控制重庆市重点实验室, 重庆 400067;
2.
重庆工商大学废油资源化技术与装备教育部工程研究中心, 重庆 400067;
3.
重庆理工大学机械工程学院, 重庆 400050

基金项目:

国家自然科学基金项目(51375515)

重庆市科技攻关计划项目(CSTC2011AC6086)

重庆市教委科技项目(KJ110710)

重庆工商大学青年博士基金项目(1152005)

重庆市教委大学生创新创业训练计划项目(201211799019)资助

详细信息

作者简介:
王立存(1978-)，教授，博士，研究方向为制冷涡旋压缩机设计和复杂机械系统多学科协同优化，wanglicun@163.com

计量
- 文章访问数: 84
- HTML全文浏览量: 16
- PDF下载量: 4
- 被引次数: 0
出版历程
- 收稿日期: 2013-01-06
- 刊出日期: 2015-06-10

Research on the Reverse and Reconstruction Technology of Scroll Plate of Scroll Compressor for Refrigerating System

1.
Chongqing Key Laboratory of Manufacturing Equipment Machanism Design and Control, Chongqing Technology and Business University, Chongqing, 400067;
2.
Engineering Research Center for Waste Oil Recovery Technology and Equipment of Ministry of Education Chongqing Technology and Business University, Chongqing 400067;
3.
College of Mechanical Engineering, Chongqing University of Technology, Chongqing 400050

摘要

摘要: 涡旋盘是影响滤油机制冷系统涡旋压缩机性能的主要部件,在逆向工程反求基础上,通过激光扫描方式获取涡旋盘点云数据,比较了接触式测量和非接触式测量的优缺点。利用Imageware进行了点云数据处理,通过Imageware导入扫描所得到的点云,选择保留原始数据,在显示中选择隐藏选择对象,对剩下的点云部分进行圈选,直到点云近似于一条直线。基于CATIA软件平台对涡旋盘进行了重构和反求,运用在点云上生成断面功能,将实体部分隐藏,在截出图形上选择点列,切换到创成式外形设计模式,构建新的曲线和平面,按照涡旋盘实体对图形进行倒角等修改获得最终涡旋盘成品。
- 涡旋盘 /
- 涡旋压缩机 /
- 滤油机 /
- 重构技术 /
- 反求技术
Abstract: Scroll Plate is the main component affecting the performance of the scroll machine. Based on the Reverse Engineering,this paper has obtained the scroll point cloud data via laser scanning and compared the advantages and disadvantages of the contact measurement with the non-contact measurement at the same time. After using the Image ware into the processing point cloud data,the scroll' s reconstruction and reverse based on the CATIA software platform have carried out. This paper has absorbed the advanced technology and promoted the achievements, progress and technical innovation. More importantly,this study has further validated the principle of work of the scroll machine. This paper provided the new technology and methods for the scroll machine' s product design and manufacturing,greatly improved the precision of product design and manufacturing and realized the paperless processing,and the product development cycle has been shortened.
- compressors /
- computer aided design /
- computer aided manufacturing /
- computer software /
- data acquisition

HTML全文

参考文献(10)

[1]	樊灵，耿森林，靳春梅．涡旋压缩机机构统一模型的研究[J]．机械科学与技术，2000，19(5): 755-757 Fan L，Geng S L，Jin C M. A study of general mechanism model for scroll compressor[J]. Mechanical Science and Technology，2000，19 (5): 755-757 (in Chinese)
[2]	洪军，李宝童，张浩锋，等．基于多种反求方法集成的复杂结构零件测量过程规划技术[J]．机械工程学报，2009，(2): 128-136 Hong J，Li B T，Zhang H F，et al. Measurement planning for complex structural components based on the integration of multi-RE[J]. Journal of Mechanical Engineering，2009，(2): 128-136 (in Chinese)
[3]	唐先智，刘飞，李绪武．钣金零件反求数据分层处理算法研究[J]．中国机械工程，2010，(6): 670-682 Tang X Z，Liu F，Li X W. Study on layed data processing of sheet metal and its applications in reverseengineering[J]. China Mechanical Engineering，2010，(6): 670-682 (in Chinese)
[4]	唐景春，左承基．降低汽车空调涡旋压缩机排气温度的结构分析[J]．中国机械工程，2012，(2): 248-250 Tang J C，Zuo C J. Structural analysis to reduce discharge temperature for vehicle air-conditioning scroll compressor[J]. China Mechanical Engineering，2012，(2): 248-250 (in Chinese)
[5]	张贤明，牟瑛，王立存．通用涡旋型线压缩机关键部件及整机性能力学分析[J]．机械科学与技术，2011，(11): 1938-1945 Zhang X M，Mu Y，Wang L C. Mechanical analysis of key components and machine performance for the general scroll profiles compressor[J]. Mechanical Science and Technology，2011，(11): 1938-1945 (in Chinese)
[6]	王国庆，陈靖芯．基于 Imageware 的汽车覆盖件逆向设计[J]．机械工程与自动化，2010，(6): 62-63 Wang G Q，Chen J X. Imageware-based reverse design of automobile panel[J]. Mechanical Engineering % Automation，2010，(6): 62-63 (in Chinese)
[7]	王霄．逆向工程技术及其运用[M]．北京: 化学工业出版社，2004Wang X. Reverse engineering technology and application[M]. Beijing:Chemical Industry Press，2004 (in Chinese)
[8]	王立存，张贤明，陈国强，等．基于泛函的通用涡旋型线形状变化规律研究[J]．中国机械工程，2011，8(4): 1980-1983 Wang L C，Zhang X M，Chen G Q，et al. Research on shape variation disciplinarian of scroll profiles based on functional theory[J]. China Mechanical Engineering，2011，8(4): 1980-1983 (in Chinese)
[9]	刘越华，廖文和，刘浩．逆向工程中散乱点云的 K 邻域搜索算法研究[J]．机械设计与制造，2012，(4): 219-221 Liu Y H，Liao W H，Liu H. Research of K-nearest neighbors search algorithm in reverse engineering[J]．Machinery Design % Manufacture，2012，(4): 219-221 (in Chinese)
[10]	闫雒恒．面向点云的特征模型重构及其关键算法研究[J]．机械设计与制造，2012，(3): 256-258 Yan L H. Research on feature model reconstruction and its key algorithm based on point cloud[J]. Machinery Design % Manufacture，2012，(3): 256-258 (in Chinese)