Study of Landing Gear Actuating Cylinder's Inner-lock
-
摘要: 以卡环锁、钢球锁、指形锁3种飞机起落架作动筒内锁为研究对象,阐述了3种作动筒内锁的工作原理,分析了3种内锁核心构件的受力情况、开锁压力和工艺要求。研究分析结果表明:钢球锁上锁力小,制造、安装方便;卡环锁上锁力大,工艺要求高;指形锁上锁压力大,稳定可靠,制造、安装难度大。Abstract: Three kinds landing gear actuating cylinder's inner-locks of aircraft: block ring lock,ball lock,finger lock are taken as study object base on some aircraft typical inner-lock practical application,the working principle of the three typical actuating cylinder's inner-locks are described,the stress and workmanship requirements of the three inner-lock key components are analysised.It is found that the ball lock requires small locking pressure and it is easy to be fabricated and installed,the block ring lock requires large locking pressure and high workmanship requirements,while finger lock also requires large lock pressure with stable working behaviour but is difficult to be fabricated and installed.
-
[1] 顾长鸿等.飞机起落架上位锁机构可靠性分析[J]. 北京航空航天大学学报, 1995, 21(4):18~22 [2] 高泽迥.飞机设计手册第 14 册起飞着陆系统设计[M]. 北京:航空航空工业出版社, 2002 [3] 刘鸿文.材料力学[M]. 北京:高等教育出版社, 1992 [4] 杨后川, 高昆, 陈勇.起落架收放作动筒液压测试系统的 PLC设计[J]. 机电产品开发与创新, 2008, 21(2):129~135 [5] 冯蕴雯, 国志刚, 宋笔锋.如何确保飞机起落架收放锁系统的可靠性[J]. 西北工业大学学报, 2005, 23(2):171~175 [6] Lee H.Modeling of a Hydraulically Damped PyrotechnicActuator[R]. Orlando Florida: Aircraft Industries Association ofAmerica, 2009 [7] 葛文军, 汪定江, 陈名华等.飞机作动筒活塞杆的摩擦电喷镀修复工艺[J]. 材料保护, 2008, 41(4):59~61 [8] 李续庆, 陈作模.机械设计基础[M]. 北京:高等教育出版社, 1999
点击查看大图
计量
- 文章访问数: 144
- HTML全文浏览量: 43
- PDF下载量: 12
- 被引次数: 0