The Manufacturing-oriented Process Knowledge Representation and Application for the Rubber Pad Forming
-
摘要: 为了实现橡皮囊液压成形工艺知识在钣金件数字化制造过程中的应用,采用IDEF0方法建立了橡皮囊成形零件数字化制造系统模型。分析了工艺知识组成并建立了知识分类模型,提出了工艺知识库的构建方法。设计了橡皮囊液压成形工艺知识在制造过程中的集成应用模式,开发了基于Web的工艺知识库及其应用系统。最后以某型机框肋零件制造模型设计为例说明了知识应用过程,验证了上述方法的可行性和有效性。Abstract: To apply the rubber pad forming knowledge into digital manufacture of sheet metal parts,the digital manufacturing model for rubber pad forming part is established by using IDEF0.The composition of process knowledge is analyzed and the classification model is put forward,then the approach to building the process knowledge base is proposed.The mode of integrated application of the process knowledge into rubber pad forming is designed,and the web-based process knowledge base and its application system is developed.Finally,the manufacturing model of an aircraft frame and rib part is used to show the knowledge application procedure and verify the effectiveness and practicability of methodology.
-
Key words:
- rubber pad forming /
- digital manufacturing /
- process knowledge /
- knowledge base /
- knowledge application
-
[1] 王俊彪, 肖乐, 刘闯等.橡皮囊液压成形模具快速设计方法及实现[J]. 航空制造技术, 2008, (2):32~35 [2] 刘闯.面向飞机钣金数字化制造的知识重用方法研究与应用[D]. 西安:西北工业大学, 2006 [3] 陈鲲等.飞机蒙皮拉形工艺知识库的研究与开发[J]. 塑性工程学报, 2008, 15(5):142~146 [4] 王俊彪, 李建新, 刘闯.基于知识的飞机钣金零件工艺性评估方法[J]. 计 算 机 集 成 制 造 系 统, 2008, 14 (6 ): 1090~1094, 1100 [5] Cochrane S,et al.Knowledge reuse in manufacturability analysis[J]. Robotics and Computer-Integrated Manufacturing, 2008,24:508~513 [6] 陆兴海.飞机钣金件工程设计协同平台研究与开发[D]. 西安:西北工业大学, 2007 [7] 魏丽, 郑联语, 刘日晖.基于工艺失效知识的工艺改进方法及实现[J]. 北京航空大学学报, 2006, 32(5):585~589 [8] Lin B T,Chan C K,Wang J C.A knowledge-based parametricdesign system for drawing dies[J]. International Journal Ad-vanced Mannfacture Technology, 2008, 36:671~680 [9] 刘闯, 王俊彪, 卢元杰等.面向工艺链的零件制造模型框架研究[J]. 计算机集成制造系统, 2009, 15(6):1070~1074
点击查看大图
计量
- 文章访问数: 403
- HTML全文浏览量: 35
- PDF下载量: 11
- 被引次数: 0