GH4169高温合金平面磨削力研究

基金项目:

国家自然科学基金项目(51005184)资助

Study on the Surface Grinding Force of Superalloy GH4169

1.
School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072

摘要: 建立了GH4169高温合金单磨粒磨削过程的数值仿真模型,通过计算仿真并对结果进行统计分析,获得了单磨粒磨削过程与宏观砂轮磨削过程的映射关系,提出了GH4169高温合金平面磨削力的预测方法。探究了磨削速度、工件进给速度和磨削深度等工艺参数对单磨粒磨削力及砂轮磨削力影响的规律。GH4169高温合金平面磨削力的实验研究支持了理论模型和计算结果。
- 高温合金 /
- 平面磨削 /
- 磨削力 /
- 数值仿真
Abstract: A numerical simulation model of single-grain grinding for superalloy GH4169 is presented,and the mapping relationship between single-grain grinding and macroscopic grinding is established based on the statistical analysis of simulation results.At last,a novel method to predict the surface grinding force of superalloy GH4169 is proposed.And the law that the grinding technical parameters,which containes peripheral wheel speed,workpiece speed and the wheel depth of cut,affect the single-grain and macroscopic grinding force is investigated.The theoretically model and computation results are supported by the surface grinding test of superalloy GH4169.
- superalloy /
- surface grinding /
- grinding force /
- numerical simulation

[1]	Doman D A,et al.Experimentally validated finite element modelof the rubbing and ploughing phases in scratch tests[J].JournalEngineering Manufacture,2009,223:1519～1527
[2]	Ohbuchi Y,Obikawa T.Finite element modeling of chip forma-tion in the domain of negative rake angle cutting[J].Journal ofEngineering Materials and Technology,2003,125:324～332
[3]	Su C,et al.Simulation study of single grain cutting based onfluid-solid-interaction method[J].Journal of System Simula-tion,2008,20:5250～5257
[4]	叶勇,徐西鹏.单颗金刚石磨削花岗石中力的离散单元分析及试验验证[J].摩擦学学报,2009,29(3):215～220
[5]	王君明,叶人珍,汤漾平,宾鸿赞.单颗磨粒的平面磨削三维动态有限元仿真[J].金刚石与磨料磨具工程,2009,(5)
[6]	程侃.寿命分布类与可靠性数学理论[M].北京:科学出版社,1999
[7]	Scientific Forming Technologies Corporation.DEFORMTM3DVersion 6.1(sp1)User's Manual[M].Columbus OH,USA:Scientific Forming Technology Corporation Ed,2007
[8]	THwnag W,et al.High speed grinding of silicon nirtride withelectroplated diamond wheels[J].ASME Journal of Manufan-turing Science and Engineering,2000,122:32～42
[9]	Zhang J H,et al.Theory and experiment study on the grindingforce[J].Advance Materials Research,2007,24-25:217～222
[10]	李伯民,赵波.现代磨削技术[M].北京:机械工业出版社,2003