FANUC系统中实时前瞻的NURBS插补研究与实现

基金项目:

浙江省教育厅科研项目(Y201018385)资助

Realizing Real-time Look-ahead NURBS Interpolation in FANUC System

1.
Department of Mechanical and Electrical Engineering, Ninbo Polytechnic, Ningbo 315800;
2.
School of Mechanical and Electrical Engineering, Luoyang Institute of Science and Technology, Luoyang 471023

摘要: 在加工NURBS曲线时,为克服直线插补和圆弧插补的不足,可利用FANUC系统自身的NURBS插补功能实现NURBS曲线加工。为保证NURBS曲线的高速高精加工,利用伺服HRV2控制功能与CNC的实时前瞻控制相结合,通过调整预读前馈系数和速度增益参数方法改善机床的加工性能。实际刀具运动轨迹表明,该方案可改善伺服系统的响应和刚性,减少机床的加工误差并提高定位速度。
- 插补 /
- NURBS /
- 实时前瞻 /
- 预读前馈 /
- 速度增益
Abstract: To overcome the shortcomings of line interpolation and circular interpolation,we utilize the NURBS interpolation function of the FANUC system to carry out the machining of NURBS curve.In order to ensure the high-speed and high-accuracy machining of the NURBS curve,we combine the control function of the HRV2 servo system with the real-time look-ahead control function of CNC and improve the machining performance of the CNC by adjusting the look-ahead feedforward coefficient and the velocity gain parameters.The actual tool movement trajectories show that our new scheme can improve the response and rigidity of the servo system,reduce the machining errors of the CNC and increase its location velocity.
- real-time look-ahead interpolation /
- NURBS curve /
- look-ahead feedforward /
- velocity gain /

[1]	Bedi S,Quan N.Spline interpolation technique for NC machines[J].Computers in Industry,1992,(18):307～313
[2]	Wang F C,Yang D C.Nearly arc-length parameterized qunintic-spline interpolation for precision machining[J].Computer-Aided Design,1993,25(50):282～287
[3]	Huan J.Spline-interpolation in der steuerung einer werkzeugm-aschine[J].Wt Zeitschrift für Industrielle Fertigung,1986,76:309～312
[4]	Pritschow G,Schweiker A.Durchgngige einsatz von splines in offenennumerischen steuerungssystemen[J].Wt-Werk-stattstechnik,1998,88(1/2):23～28
[5]	朱心雄等.自由曲线曲面造型技术[M].北京:科学出版社,2000
[6]	施法中.计算机辅助几何设计与非均匀有理B样条[M].北京:高等教育出版社,2001
[7]	陈绍平.NURBS曲线的插值与应用[J].机械科学与技术,2001,20(5):692～693
[8]	B-63534EN/02.FANUC Series18i/180i/180is-MB OPERA-TOR'S MANUAL
[9]	康书杰.NURBS曲线实时插补技术研究[D].南京航空航天大学,2007
[10]	周济,周艳红.数控加工技术[M].北京:国防工业出版社,2002
[11]	黄翔,曾荣.NURBS插补技术在高速加工中的应用研究[J].南京航空航天大学学报,2002,34(1)