The Acquisition and Modeling System of Cutting Force Based on LabVIEW
-
摘要: 应用统计学中的响应面方法,以背吃刀量,主轴转速,进给量和切削宽度为设计变量,切削力为响应,建立切削力的二阶数学模型。以45钢铣削试验为例搭建硬件测试系统。将响应面方法融入到LabVIEW8.6编程之中,设计软件系统。该系统功能丰富,输入影响因子的个数,给定因子的取值范围,就能自动生成中心组合设计试验方案,并对试验数据进行采集、计算和分析,得到切削力响应面模型。Abstract: With back cutting depth,spindle speed,feeding and cutting width as design variables,and cutting force as response,a second-order mathematical model of cutting force is built using the response surface method of statistics.The hardware test system of cutting experiment for 45 steel is built.The response surface method is incorporated in LabVIEW 8.6 programming to design the software system.By inputting the number of impact factor and the factor value scope,the software system can automatically generate a center combination experimental design scheme and it can collect,calculate and analyze the experimental data,and,finally build the response surface model.
-
Key words:
- cutting forcel /
- LabVIEW /
- model
-
[1] Shevchuk V P,Korovina E V.Optimization of the operating pa-rameters of the measurement channels of a virtual instrument fromthe reading of the heat energy consumed[J].MeasurementTechniques,2007,50(10) [2] Shevchuk V P,et al.An investigation of the metrological charac-teristics of a virtual instrument for measuring the operating efficien-cy of hydroelectric equipment[J].Measurement Techniques,2008,51(10):1110~1115 [3] 安军,唐东炜,林云峰等.基于虚拟仪器的旋转机械振动测试系统[J].仪表技术与传感器,2009,(2):20~122 [4] 刘德辉,廖高华,唐钢.面向机械参量集成测试的虚拟仪器[J].仪表技术与传感器,2008,(2):20~122 [5] 马昕辉,杜胜,姚静波.基于PCI总线的动态测试系统软件设计研究[J].测试技术学报,2010,24(6):491~495 [6] 陈立周.稳健设计[M].机械工业出版社,2000 [7] Montgomery D C.Design and Analysis of Experiments[M].New York:John Wiley,1984 [8] 倪为国,潘延华.铣削刀具技术及应用实例[M].化学工业出版社,2007 [9] 袁人炜,陈明.响应面法预测铣削力模型及影响因素分析[J].上海交通大学学报,2001,35(7):1040~1044
点击查看大图
计量
- 文章访问数: 135
- HTML全文浏览量: 28
- PDF下载量: 5
- 被引次数: 0