环状缝隙调压阀的一种设计方法和特性计算

Design and Characteristic Study of an Annular Ring Pressure-regulating Valve

摘要: 提出环状缝隙调压阀结构设计和气动特性计算的一种方法,推导出阀门型面坐标的计算公式,针对调压阀的气动特性编制了相应的计算程序,通过计算结果与试验数据对比,验证了本文方法的可靠性,同时讨论了增加风洞气源压力和增大气源容积对风洞试验时间的影响,最后给出了风洞稳定段总温随时间的变化趋势。
- 环状缝隙调压阀 /
- 结构设计 /
- 气动特性计算 /
- 试验数据对比
Abstract: A method of structure design and characteristic calculation for an annular ring pressure-regulating valve was proposed with formula. The coordinates calculation of the valve section are formulated and the computing code for the aerodynamic characteristic of pressureegulating valve were developed. This method was proved credible by comparing calculated data with experimental ones. The stagnation temperature in wind tunnel chamber and the testing time were also discussed.
- annular ring pressure-regulating valve /
- structure design /
- aerodynamic characteristic /
- comparing results

[1]	刘政崇.高低速风洞气动与结构设计[M].北京:国防工业出版社,2003
[2]	李哲,魏志军,张平.调压阀内流场数值模拟及动态特性分析[J].北京理工大学学报,2007,27(5):390～394
[3]	李哲,魏志军,张平.自力式调压阀变开度流场及特性分析[J].推进技术,2008,29(5):622～626
[4]	Lafond A.Numerical Simulation of the Flowfield Inside a HotGas Valve[R].AIAA-99-1087.Reno:AIAA,1999
[5]	沈维道,童钧耕.工程热力学[M].北京:高等教育出版社,2007
[6]	陶文铨.数值传热学[M].西安:西安交通大学出版社,2001
[7]	金英子,朱祖超,杨庆俊等.气动系统充放气过程中气体状态多变指数的简化与确定[J].机械工程学报,2005,41(6):76～80