基于导动曲线规划的牙齿修复体精加工刀轨生成算法

韩厚年; 戴宁; 程筱胜; 董光雷; 杨峰; 孙玉春

基于导动曲线规划的牙齿修复体精加工刀轨生成算法

1.
南京航空航天大学, 南京 210016;
2.
北京大学口腔医学院, 北京 100081

基金项目:

国家科技支撑计划项目(2009BAI81B02)

江苏省卫生厅医学科研项目(H201034)

“江苏省六大人才”高峰项目(2010-WS081)资助

详细信息

作者简介:
韩厚年(1987-)，硕士研究生，研究方向为CAD/CAM和逆向工程，h2n-0129@yahoo.com.cn，戴宁(联系人)，副教授，博士，dai-ning@nuaa.edu.cn

韩厚年(1987-)，硕士研究生，研究方向为CAD/CAM和逆向工程，h2n-0129@yahoo.com.cn，戴宁(联系人)，副教授，博士，dai-ning@nuaa.edu.cn

计量
- 文章访问数: 163
- HTML全文浏览量: 20
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2011-06-21
- 刊出日期: 2015-06-10

An Algorithm for the Tool Path Generation of Dental Restoration Based on the Guide Lines Planning

1.
Nanjing University of Aeronautics and Astronautics, Nanjing 210016;
2.
School of Stomatology, Peking University, Beijing 100081

摘要

摘要: 对于非凸区域加工范围的口腔修复体的行切走刀方式,针对跳刀频繁问题,提出了基于二维平面规划的导动曲线生成算法。该方法首先利用平行线段与加工区域求交得到交点,建立交点与加工区域边界的拓扑连接关系,根据对应关系按照一定的原则连接交点以及区域的边界点从而构建出连续的较少跳刀的导动曲线。最终生成刀具轨迹的跳刀次数与导动曲线的跳刀次数一致。实例表明该算法稳定快速且可靠,能显著减少跳刀次数,提高口腔修复体的加工效率。
- 导动曲线 /
- 刀具轨迹 /
- 口腔修复体
Abstract: In order to solve the problem of frequent retraction of direction parallel tool pam m me non-convex machining of dental restoration, the generation algorithm of guide lines planning on two-dimension plane is proposed. First of all, the topology relationship between the boundary of machining region and intersections obtained from the parallel line intersected with the machining region should be established, and then the intersections and points in the boundary to form continuous guide lines with less retraction should be linked, according to the corresponding re-lationship. The tool retraction of the resulting tool path generated by the present algorithm is equal to the number of guide lines. The testing results show that the algorithm is stable, fast and reliable, and it can significantly reduce the frequency of tool retraction and improve the processing efficiency of dental restoration.
- guide lines /
- tool path /
- dental restoration

HTML全文

参考文献(12)

[1]	Bindl A,Richter B,MRMANN W H.Survival of ceramic com-puter-aided design/manufacturing crowns bonded to preparationswith reduced macroretention geometry[J].International Jour-nal of Prosthodontics,2005,18(3):219～224
[2]	Bindl A,MRMANN W H.Marginal and internal fit of all-ceramicCAD/CAM crown-copings on chamfer preparations[J].Journal ofOral Rehabilitation,2005,32(6):441～447
[3]	Lee Y S.Non-isoparametric tool path planning by machining stripevaluation for 5-axis sculptured surface machining[J].Comput-er-Aided Design,1998,30(7):559～570
[4]	Lai Y L.Tool-path generation of planar NURBS curves[J].Ro-botics and Computer-Integrated Manufacturing,2010,26(5):471～482
[5]	Park S C.Tool-path generation for Z-constant contour machining[J].Computer-Aided Design,2003,35(1):27～36
[6]	Choi B K,Jerard R B.Sculptured Surface Machining Theoryand Applications[M].Kluwer Academic Publishers,1998
[7]	Suh Y S,Lee K.NC milling tool path generation for arbitrarypockets defined by sculptured surfaces[J].Computer-AidedDesign,1990,22(5):273～284
[8]	谢叻,周儒荣,阮雪榆.自由曲面自适应投影法精加工刀轨生成[J].上海交通大学学报,2000,34(10):1383～1384
[9]	Castelino K,et al.Tool-path optimization for minimizing airtimeduring machining[J].Journal of Manufacturing Systems,2003,22(3):173～180
[10]	Arkin E M,et al.Optimization problems related to zigzag pocketmachining[J].Algorithmica,2000,26(2)
[11]	Tang K,Joneja A.Traversing the machining graph of a pocket[J].Computer-Aided Design,2003,35(11):1023～1040
[12]	Aybars UUR.Path planning on a cuboid using genetic algo-rithms[J].Information Sciences,2008,178(16)