超细磨喂料装置流场分析与数值实验研究

基金项目:

国家科技支撑计划项目(2011BAA04B04)资助

Flow Field Analysis of and Numerical Experiments on Feeding Device of Ultra-fine Mill

1.
School of Manufacturing Science and Engineering, Southwest University of Science and Technology, Mianyang 621010

摘要: 针对超细磨实际运行中电机出现的过流现象,运用计算流体力学(CFD)技术,对超细磨的进料装置的流场进行分析,指出过流现象是由于物料颗粒通过进料装置时因堵塞所照成。利用正交实验设计的方法进行了数值实验。通过方差分析得到出口压力、转速、出口压力与喂料量的交互作用对喂料的连续性影响最显著。数值实验表明:出口压力为-1 000 Pa、喂料量为0.10 kg/min、转速为1 000 r/min时为最佳工况。
- 超细磨喂料装置 /
- 流场分析 /
- 正交实验
Abstract: There is over current in the motor of an ultra-fine mill when it is the computational fluid dynamic technology to analyze the flow field of its working. feeding To solve the problem, we use device. We point out that the problem is caused by the block of particles in the feeding device. We use the orthogonal experiment to carry out nu-merical experiments. The variance analysis results show that outlet pressure of the feeding device, its rotational speed and the interaction between the outlet pressure and th ing continuity. The numerical experiments show that the e feeding volume have the greatest influence on its feed-feeding device works best when its outlet pressure is-1 000 Pa; its feeding volume is0.10 kg/h and its rotational speed is 1 000 r/min.
- feeding device /
- ultra-fine mill /
- flow field analysis

[1]	李凤生等.超细分体技术[M].北京:国防工业出版社,2000:13～14
[2]	张更超,应富强.超细粉碎技术现状及发展趋势[J].中国粉体技术,2003,9(2):44～48
[3]	尹小冬,王长会,谭涌,马亮.超细粉碎技术现状与应用[J].中国非金属矿工业导刊,2009,(3):46～49
[4]	李建,杨坤,韩建业.正交试验设计在TA2筒形件拉深成形过程中的应用[J].机械科学与技术,2010,29(3):323～328
[5]	金雪菲.液液两相分离装置结构研究与流场分析研究[D].浙江:浙江大学,2011
[6]	谢东江.环冷机冷却过程数值仿真与优化[D].长沙:中南大学,2010
[7]	陈养厚,陈国明.基于CFD正交仿真的冲刷防治方法优化研究[J].系统仿真学报,2008,20(19):5358～5361
[8]	陶文铨.数值传热学[M].西安:西安交通大学出版社,2001