基于联立约束法的变胞机构动力学仿真研究

基金项目:

国家自然科学基金项目(51275352)

天津市应用基础及前沿技术研究计划项目(09JCYBJC04600)资助

Dynamics Simulation of Metamorphic Mechanism Based on the Simultaneous Constraint Method

1.
School of Mechanical Engineering,Tianjin Polytechnic University,Tianjin 300387;
2.
Tianjin Key Laboratory of Advanced Mechatronics Equipment Technology,Tianjin 300387

摘要: 变胞机构作为一种新型机构在工程领域有着广泛的应用。用联立约束法对一种可以实现变轨迹的带有闭环约束的变胞机构进行了动力学建模,并用Matlab/Simulink对其进行了数值仿真分析。数值仿真结果表明,变胞机构在构态切换时运动变量和力有一定的突变,进而提出了解决突变的方法。联立约束法是一种对变胞机构进行动力学分析研究的有效方法,丰富了关于变胞机构研究的理论与方法。
- 变胞机构 /
- 动力学 /
- Simulink /
- 仿真
Abstract: Acting as a new kind of mechanism,metamorphic mechanisms are widely used in engineering fields.In this paper,a dynamics model is established for a metamorphic mechanism containing closed-loop constraint by using simultaneous constraint method,and the simulation analysis is implemented using Matlab/Simulink.The results of numerical simulation show that its kinematic variables and force have saltation when the configuration changes from one to another and a method is proposed to solve this problem.
- metamorphic mechanism /
- dynamics /
- simulink /
- simulation

[1]	Dai J S,Jones J Rees. Mobility in metamorphic mechanism of foldable/erectable kinds[J].Journal of Mechanical Design,Transactions of the ASME,1999,(03):375-382.
[2]	Dai J S,Zhang Q X. Metamorphic mechanism and their configu-ration models[J].Chinese Journai of Mechanical Engineer-ing(English Edition),2000,(03):212-218.
[3]	金国光. 变胞机构结构学、运动学及动力学研究[D].北京:北京航空航天大学,2003.
[4]	金国光,丁希仑,张启先. 变胞机构全构态动力学模型及其数值仿真研究[J].航空学报,2004,(04):401-405.
[5]	吴艳荣,金国光,李东福. 变胞机构的构态分析及其运动学仿真研究[J].机械科学与技术,2006,(09):1092-1905.
[6]	Li D L,Ding X L,Zhang Q X. Mechanism theory of meta-morphic mechanism and application in space technology[A].2002.229-223.
[7]	曲秀全. 基于Matlab/Simulink平面连杆机构的动态仿真[M].哈尔滨:哈尔滨工业大学出版社,2007.
[8]	黄真. 高等空间机构学[M].北京:高等教育出版社,2006.
[9]	约翰.F.加德纳,周进雄,张陵. 机构动态仿真一使用Matlab和Simulink[M].西安:西安交通大学出版社,2002.