Dynamic Modeling and Simulation Analysis of the Articulated Chassis of Rhombus Concept Off-road Vehicle
-
摘要: 针对类菱形整体底盘通过性,提出了其铰接式底盘。利用ADAMS软件建立类菱形铰接式底盘的动力学模型,通过大量的动力学仿真分析,得出了整车的最大越障高度和最大爬坡度。通过实验样车试验验证了菱形车的爬坡、越障等路面自适应能力和仿真结果。Abstract: Finrstly,integrom,chassis of rhombus concept off-road vehicle was studied at home and abroad.Then the article introduced structural theory of the integrally chassis of rhombus concept off-road vehicle.On this base,the articulated chassis of rhombus concept off-road vehicle was designed to make up for the passing capability of the integrally chassis.The dynamic model of the articulated chassis was built by the software ADAMS and the dynamic simulation was carried out which provides the maximum values of crossing-obstacle and climbing-slope.The simulation results on the pavement adaptability are in good agreement with the test data of the physical prototype test.And the validated dynamical model is available for further analysis and optimization of this kind chassis.
-
Key words:
- articulated chassis /
- dynamics /
- ADAMS /
- rhombus vehicle
-
[1] 毛建中,唐友名,钟志华. 类菱形概念车中悬架优化设计[J].汽车工程,2007,(02) [2] 莫旭辉. 类菱形车操纵动力学分析与优化[D].长沙:湖南大学机械与运载工程学院,2008. [3] 毛建中. 菱形车悬架系统优化设计与动力学分析[D].长沙:湖南大学机械与运载工程学院,2009. [4] 王国强,张进平,马若丁. 虚拟样机技术及其在ADAMS上的实现[M].西安:西北工业大学出版社,2002. [5] 洪嘉振. 计算多体系统动力学[M].北京:高等教育出版社,1999. [6] 李增刚. ADAMS入门详解与实例[M].北京:国防工业出版社,2009. [7] 吴大林,马吉胜,王兴贵. 履带车辆地面力学仿真研究[J].计算机仿真,2004,(12). [8] 余志生. 汽车理论[M].北京:机械工业出版社,2009.
点击查看大图
计量
- 文章访问数: 261
- HTML全文浏览量: 32
- PDF下载量: 10
- 被引次数: 0